From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jacob Keller <jacob.e.keller@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 8/9] ixgbe: add support for 1G SX modules
Date: Wed, 20 Jun 2012 01:45:02 -0700 [thread overview]
Message-ID: <1340181903-16382-9-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1340181903-16382-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Jacob Keller <jacob.e.keller@intel.com>
This patch adds support for 1G Fiber PHY modules (SFP+ modules). This support
comes along side support for 1G Copper PHY modules, but uses a different PHY
type (ixgbe_sfp_type_1g_sx_core).
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 4 +++-
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c | 23 +++++++++++++++++++----
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 2 ++
3 files changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
index dee64d2..e7dddfd 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -241,7 +241,9 @@ static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
/* Determine 1G link capabilities off of SFP+ type */
if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
- hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) {
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
*speed = IXGBE_LINK_SPEED_1GB_FULL;
*negotiation = true;
goto out;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index 2411770..71659ed 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -907,6 +907,8 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
* 8 SFP_act_lmt_DA_CORE1 - 82599-specific
* 9 SFP_1g_cu_CORE0 - 82599-specific
* 10 SFP_1g_cu_CORE1 - 82599-specific
+ * 11 SFP_1g_sx_CORE0 - 82599-specific
+ * 12 SFP_1g_sx_CORE1 - 82599-specific
*/
if (hw->mac.type == ixgbe_mac_82598EB) {
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
@@ -957,6 +959,13 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
else
hw->phy.sfp_type =
ixgbe_sfp_type_1g_cu_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_sx_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_sx_core1;
} else {
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
}
@@ -1049,7 +1058,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
/* Verify supported 1G SFP modules */
if (comp_codes_10g == 0 &&
!(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
- hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0)) {
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1)) {
hw->phy.type = ixgbe_phy_sfp_unsupported;
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
goto out;
@@ -1064,7 +1075,9 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
hw->mac.ops.get_device_caps(hw, &enforce_sfp);
if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
!((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) ||
- (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1))) {
+ (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) ||
+ (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0) ||
+ (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1))) {
/* Make sure we're a supported PHY type */
if (hw->phy.type == ixgbe_phy_sfp_intel) {
status = 0;
@@ -1128,10 +1141,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
* SR modules
*/
if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
- sfp_type == ixgbe_sfp_type_1g_cu_core0)
+ sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_sx_core0)
sfp_type = ixgbe_sfp_type_srlr_core0;
else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
- sfp_type == ixgbe_sfp_type_1g_cu_core1)
+ sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_sx_core1)
sfp_type = ixgbe_sfp_type_srlr_core1;
/* Read offset to PHY init contents */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 1085c07..7416d22 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -2604,6 +2604,8 @@ enum ixgbe_sfp_type {
ixgbe_sfp_type_da_act_lmt_core1 = 8,
ixgbe_sfp_type_1g_cu_core0 = 9,
ixgbe_sfp_type_1g_cu_core1 = 10,
+ ixgbe_sfp_type_1g_sx_core0 = 11,
+ ixgbe_sfp_type_1g_sx_core1 = 12,
ixgbe_sfp_type_not_present = 0xFFFE,
ixgbe_sfp_type_unknown = 0xFFFF
};
--
1.7.10.2
next prev parent reply other threads:[~2012-06-20 8:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-20 8:44 [net-next 0/9][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-06-20 8:44 ` [net-next 1/9] e1000: Combining Bitwise OR in one expression Jeff Kirsher
2012-06-20 8:44 ` [net-next 2/9] igb: A fix to VF TX rate limit Jeff Kirsher
2012-06-20 8:44 ` [net-next 3/9] igb: Add switch case for supported hardware to igb_ptp_remove Jeff Kirsher
2012-06-20 8:44 ` [net-next 4/9] igb: Support the get_ts_info ethtool method Jeff Kirsher
2012-06-20 8:44 ` [net-next 5/9] igb: Streamline RSS queue and queue pairing assignment logic Jeff Kirsher
2012-06-20 8:45 ` [net-next 6/9] igb: Update firmware info output Jeff Kirsher
2012-06-20 8:45 ` [net-next 7/9] igb: Version bump Jeff Kirsher
2012-06-20 8:45 ` Jeff Kirsher [this message]
2012-06-20 8:45 ` [net-next 9/9] ixgbe: clean up ixgbe_get_settings ethtool function Jeff Kirsher
2012-06-20 22:26 ` [net-next 0/9][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340181903-16382-9-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=jacob.e.keller@intel.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).