From: <gerg@snapgear.com>
To: <netdev@vger.kernel.org>, <linux-m68k@vger.kernel.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Subject: [PATCH 1/2] m68knommu: move the badly named mcfne.h to a better mcf8390.h
Date: Wed, 4 Jul 2012 14:56:28 +1000 [thread overview]
Message-ID: <1341377789-12970-2-git-send-email-gerg@snapgear.com> (raw)
In-Reply-To: <1341377789-12970-1-git-send-email-gerg@snapgear.com>
From: Greg Ungerer <gerg@uclinux.org>
The mcfne.h include contains definitions to support NS8390 eth based hardware
on ColdFire based CPU boards. So change its name to reflect that better.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
---
arch/m68k/include/asm/mcf8390.h | 242 +++++++++++++++++++++++++++++++++++++++
arch/m68k/include/asm/mcfne.h | 242 ---------------------------------------
2 files changed, 242 insertions(+), 242 deletions(-)
create mode 100644 arch/m68k/include/asm/mcf8390.h
delete mode 100644 arch/m68k/include/asm/mcfne.h
diff --git a/arch/m68k/include/asm/mcf8390.h b/arch/m68k/include/asm/mcf8390.h
new file mode 100644
index 0000000..bf3d97b
--- /dev/null
+++ b/arch/m68k/include/asm/mcf8390.h
@@ -0,0 +1,242 @@
+/****************************************************************************/
+
+/*
+ * mcf8390.h -- NS8390 support for ColdFire eval boards.
+ *
+ * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
+ * (C) Copyright 2000, Lineo (www.lineo.com)
+ * (C) Copyright 2001, SnapGear (www.snapgear.com)
+ *
+ * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board
+ *
+ * Hacked support for m5206e Cadre III evaluation board
+ * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
+ */
+
+/****************************************************************************/
+#ifndef mcf8390_h
+#define mcf8390_h
+/****************************************************************************/
+
+
+/*
+ * Support for NE2000 clones devices in ColdFire based boards.
+ * Not all boards address these parts the same way, some use a
+ * direct addressing method, others use a side-band address space
+ * to access odd address registers, some require byte swapping
+ * others do not.
+ */
+#define BSWAP(w) (((w) << 8) | ((w) >> 8))
+#define RSWAP(w) (w)
+
+
+/*
+ * Define the basic hardware resources of NE2000 boards.
+ */
+
+#if defined(CONFIG_ARN5206)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0xf0
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 4
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206eC3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1c
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 4
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+#define NE2000_ADDR 0x30000300
+#define NE2000_IRQ_VECTOR 25
+#define NE2000_IRQ_PRIORITY 1
+#define NE2000_IRQ_LEVEL 3
+#define NE2000_BYTE volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5307C3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+#define NE2000_ADDR 0x30600300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR 67
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
+#define NE2000_ADDR0 0x30600300
+#define NE2000_ADDR1 0x30800300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR0 27
+#define NE2000_IRQ_VECTOR1 29
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
+#define NE2000_ADDR 0x30600300
+#define NE2000_ODDOFFSET 0x00008000
+#define NE2000_IRQ_VECTOR 27
+#undef BSWAP
+#define BSWAP(w) (w)
+#define NE2000_BYTE volatile unsigned short
+#undef RSWAP
+#define RSWAP(w) (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_ARN5307)
+#define NE2000_ADDR 0xfe600300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_IRQ_PRIORITY 2
+#define NE2000_IRQ_LEVEL 3
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5407C3)
+#define NE2000_ADDR 0x40000300
+#define NE2000_ODDOFFSET 0x00010000
+#define NE2000_IRQ_VECTOR 0x1b
+#define NE2000_BYTE volatile unsigned short
+#endif
+
+/****************************************************************************/
+
+/*
+ * Side-band address space for odd address requires re-mapping
+ * many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define outb ne2000_outb
+#define inb ne2000_inb
+#define outb_p ne2000_outb
+#define inb_p ne2000_inb
+#define outsb ne2000_outsb
+#define outsw ne2000_outsw
+#define insb ne2000_insb
+#define insw ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ * This macro converts a conventional register address into the
+ * real memory pointer of the mapped NE2000 device.
+ * On most NE2000 implementations on ColdFire boards the chip is
+ * mapped in kinda funny, due to its ISA heritage.
+ */
+#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define NE2000_DATA_PTR(addr) (addr)
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+ NE2000_BYTE *rp;
+
+ rp = (NE2000_BYTE *) NE2000_PTR(addr);
+ *rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+ NE2000_BYTE *rp, val;
+
+ rp = (NE2000_BYTE *) NE2000_PTR(addr);
+ val = *rp;
+ return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+ NE2000_BYTE *rp, val;
+ unsigned char *buf;
+
+ buf = (unsigned char *) vbuf;
+ rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ val = *rp;
+ *buf++ = RSWAP(val);
+ }
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short w, *buf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ w = *rp;
+ *buf++ = BSWAP(w);
+ }
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+ NE2000_BYTE *rp, val;
+ unsigned char *buf;
+
+ buf = (unsigned char *) vbuf;
+ rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ val = *buf++;
+ *rp = RSWAP(val);
+ }
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+ volatile unsigned short *rp;
+ unsigned short w, *buf;
+
+ buf = (unsigned short *) vbuf;
+ rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+ for (; (len > 0); len--) {
+ w = *buf++;
+ *rp = BSWAP(w);
+ }
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+#endif /* mcf8390_h */
diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h
deleted file mode 100644
index bf638be..0000000
--- a/arch/m68k/include/asm/mcfne.h
+++ /dev/null
@@ -1,242 +0,0 @@
-/****************************************************************************/
-
-/*
- * mcfne.h -- NE2000 in ColdFire eval boards.
- *
- * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
- * (C) Copyright 2000, Lineo (www.lineo.com)
- * (C) Copyright 2001, SnapGear (www.snapgear.com)
- *
- * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board
- *
- * Hacked support for m5206e Cadre III evaluation board
- * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
- */
-
-/****************************************************************************/
-#ifndef mcfne_h
-#define mcfne_h
-/****************************************************************************/
-
-
-/*
- * Support for NE2000 clones devices in ColdFire based boards.
- * Not all boards address these parts the same way, some use a
- * direct addressing method, others use a side-band address space
- * to access odd address registers, some require byte swapping
- * others do not.
- */
-#define BSWAP(w) (((w) << 8) | ((w) >> 8))
-#define RSWAP(w) (w)
-
-
-/*
- * Define the basic hardware resources of NE2000 boards.
- */
-
-#if defined(CONFIG_ARN5206)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0xf0
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 4
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206eC3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1c
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 4
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
-#define NE2000_ADDR 0x30000300
-#define NE2000_IRQ_VECTOR 25
-#define NE2000_IRQ_PRIORITY 1
-#define NE2000_IRQ_LEVEL 3
-#define NE2000_BYTE volatile unsigned char
-#endif
-
-#if defined(CONFIG_M5307C3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
-#define NE2000_ADDR 0x30600300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR 67
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
-#define NE2000_ADDR0 0x30600300
-#define NE2000_ADDR1 0x30800300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR0 27
-#define NE2000_IRQ_VECTOR1 29
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
-#define NE2000_ADDR 0x30600300
-#define NE2000_ODDOFFSET 0x00008000
-#define NE2000_IRQ_VECTOR 27
-#undef BSWAP
-#define BSWAP(w) (w)
-#define NE2000_BYTE volatile unsigned short
-#undef RSWAP
-#define RSWAP(w) (((w) << 8) | ((w) >> 8))
-#endif
-
-#if defined(CONFIG_ARN5307)
-#define NE2000_ADDR 0xfe600300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_IRQ_PRIORITY 2
-#define NE2000_IRQ_LEVEL 3
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-#if defined(CONFIG_M5407C3)
-#define NE2000_ADDR 0x40000300
-#define NE2000_ODDOFFSET 0x00010000
-#define NE2000_IRQ_VECTOR 0x1b
-#define NE2000_BYTE volatile unsigned short
-#endif
-
-/****************************************************************************/
-
-/*
- * Side-band address space for odd address requires re-mapping
- * many of the standard ISA access functions.
- */
-#ifdef NE2000_ODDOFFSET
-
-#undef outb
-#undef outb_p
-#undef inb
-#undef inb_p
-#undef outsb
-#undef outsw
-#undef insb
-#undef insw
-
-#define outb ne2000_outb
-#define inb ne2000_inb
-#define outb_p ne2000_outb
-#define inb_p ne2000_inb
-#define outsb ne2000_outsb
-#define outsw ne2000_outsw
-#define insb ne2000_insb
-#define insw ne2000_insw
-
-
-#ifndef COLDFIRE_NE2000_FUNCS
-
-void ne2000_outb(unsigned int val, unsigned int addr);
-int ne2000_inb(unsigned int addr);
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
-void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
-
-#else
-
-/*
- * This macro converts a conventional register address into the
- * real memory pointer of the mapped NE2000 device.
- * On most NE2000 implementations on ColdFire boards the chip is
- * mapped in kinda funny, due to its ISA heritage.
- */
-#define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
-#define NE2000_DATA_PTR(addr) (addr)
-
-
-void ne2000_outb(unsigned int val, unsigned int addr)
-{
- NE2000_BYTE *rp;
-
- rp = (NE2000_BYTE *) NE2000_PTR(addr);
- *rp = RSWAP(val);
-}
-
-int ne2000_inb(unsigned int addr)
-{
- NE2000_BYTE *rp, val;
-
- rp = (NE2000_BYTE *) NE2000_PTR(addr);
- val = *rp;
- return((int) ((NE2000_BYTE) RSWAP(val)));
-}
-
-void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
-{
- NE2000_BYTE *rp, val;
- unsigned char *buf;
-
- buf = (unsigned char *) vbuf;
- rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- val = *rp;
- *buf++ = RSWAP(val);
- }
-}
-
-void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short w, *buf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- w = *rp;
- *buf++ = BSWAP(w);
- }
-}
-
-void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
-{
- NE2000_BYTE *rp, val;
- unsigned char *buf;
-
- buf = (unsigned char *) vbuf;
- rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- val = *buf++;
- *rp = RSWAP(val);
- }
-}
-
-void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
-{
- volatile unsigned short *rp;
- unsigned short w, *buf;
-
- buf = (unsigned short *) vbuf;
- rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
- for (; (len > 0); len--) {
- w = *buf++;
- *rp = BSWAP(w);
- }
-}
-
-#endif /* COLDFIRE_NE2000_FUNCS */
-#endif /* NE2000_OFFOFFSET */
-
-/****************************************************************************/
-#endif /* mcfne_h */
--
1.7.0.4
next prev parent reply other threads:[~2012-07-04 4:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-04 4:56 [PATCH 0/2] net: support for NS8390 based ethernet on ColdFire CPU boards gerg
2012-07-04 4:56 ` gerg [this message]
2012-07-04 4:56 ` [PATCH 2/2] net: add support for NS8390 based eth controllers on some " gerg
2012-07-04 5:18 ` Joe Perches
2012-07-04 6:18 ` Greg Ungerer
2012-07-04 6:39 ` Joe Perches
2012-07-04 7:52 ` Geert Uytterhoeven
2012-07-04 8:06 ` Greg Ungerer
2012-07-04 14:52 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341377789-12970-2-git-send-email-gerg@snapgear.com \
--to=gerg@snapgear.com \
--cc=gerg@uclinux.org \
--cc=linux-m68k@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox