From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: <netdev@vger.kernel.org>, <bhutchings@solarflare.com>,
<Arvid.Brodin@xdin.com>
Cc: <kuznet@ms2.inr.ac.ru>, <shemminger@vyatta.com>,
<linux-arm-kernel@lists.infradead.org>, <davem@davemloft.net>,
Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: [PATCH] net/macb: manage carrier state with call to netif_carrier_{on|off}()
Date: Wed, 4 Jul 2012 11:14:13 +0200 [thread overview]
Message-ID: <1341393253-6531-1-git-send-email-nicolas.ferre@atmel.com> (raw)
In-Reply-To: <1341361835.2839.21.camel@bwh-desktop.uk.solarflarecom.com>
OFF carrier state is setup in probe() open() and suspend() functions.
The carrier ON state is managed in macb_handle_link_change().
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
Hi,
This patch follows the discussion about IPv6 and macb interface
("ADDRCONF(NETDEV_UP): eth0: link is not ready" with IPv6)
It may not address all aspects of the discussion, so please do comments...
I am still wondering if netif_carrier_off() is needed in macb_probe() *after*
the call to register_netdev() in addition to its inclusion in the open()
function. As I saw it in sevral drivers, I kept it.
I have tested several suspend/resume loops, and I think that just calling
netif_carrier_off() in suspend() function is sufficient: am I right?
Thanks for your help,
Best regards,
drivers/net/ethernet/cadence/macb.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 1466bc4..033064b 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -179,13 +179,16 @@ static void macb_handle_link_change(struct net_device *dev)
spin_unlock_irqrestore(&bp->lock, flags);
if (status_change) {
- if (phydev->link)
+ if (phydev->link) {
+ netif_carrier_on(dev);
netdev_info(dev, "link up (%d/%s)\n",
phydev->speed,
phydev->duplex == DUPLEX_FULL ?
"Full" : "Half");
- else
+ } else {
+ netif_carrier_off(dev);
netdev_info(dev, "link down\n");
+ }
}
}
@@ -1033,6 +1036,9 @@ static int macb_open(struct net_device *dev)
netdev_dbg(bp->dev, "open\n");
+ /* carrier starts down */
+ netif_carrier_off(dev);
+
/* if the phy is not yet register, retry later*/
if (!bp->phy_dev)
return -EAGAIN;
@@ -1406,6 +1412,8 @@ static int __init macb_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
+ netif_carrier_off(dev);
+
netdev_info(dev, "Cadence %s at 0x%08lx irq %d (%pM)\n",
macb_is_gem(bp) ? "GEM" : "MACB", dev->base_addr,
dev->irq, dev->dev_addr);
@@ -1469,6 +1477,7 @@ static int macb_suspend(struct platform_device *pdev, pm_message_t state)
struct net_device *netdev = platform_get_drvdata(pdev);
struct macb *bp = netdev_priv(netdev);
+ netif_carrier_off(netdev);
netif_device_detach(netdev);
clk_disable(bp->hclk);
--
1.7.10
next prev parent reply other threads:[~2012-07-04 9:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-29 2:36 "ADDRCONF(NETDEV_UP): eth0: link is not ready" with IPv6 Arvid Brodin
2012-06-29 15:24 ` Ben Hutchings
2012-07-03 15:47 ` Arvid Brodin
2012-07-03 15:55 ` Ben Hutchings
2012-07-03 16:15 ` Nicolas Ferre
2012-07-04 0:30 ` Ben Hutchings
2012-07-04 9:14 ` Nicolas Ferre [this message]
2012-07-09 7:03 ` [PATCH] net/macb: manage carrier state with call to netif_carrier_{on|off}() David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341393253-6531-1-git-send-email-nicolas.ferre@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=Arvid.Brodin@xdin.com \
--cc=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=kuznet@ms2.inr.ac.ru \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).