From: Rob Herring <robherring2@gmail.com>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Rob Herring <rob.herring@calxeda.com>
Subject: [PATCH 2/4] net: calxedaxgmac: fix hang on rx refill
Date: Mon, 9 Jul 2012 19:16:08 -0500 [thread overview]
Message-ID: <1341879370-23385-3-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1341879370-23385-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
Fix intermittent hangs in xgmac_rx_refill. If a ring buffer entry already
had an skb allocated, then xgmac_rx_refill would get stuck in a loop. This
can happen on a rx error when we just leave the skb allocated to the entry.
[ 7884.510000] INFO: rcu_preempt detected stall on CPU 0 (t=727315 jiffies)
[ 7884.510000] [<c0010a59>] (unwind_backtrace+0x1/0x98) from [<c006fd93>] (__rcu_pending+0x11b/0x2c4)
[ 7884.510000] [<c006fd93>] (__rcu_pending+0x11b/0x2c4) from [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8)
[ 7884.510000] [<c0070b95>] (rcu_check_callbacks+0xed/0x1a8) from [<c0036abb>] (update_process_times+0x2b/0x48)
[ 7884.510000] [<c0036abb>] (update_process_times+0x2b/0x48) from [<c004e8fd>] (tick_sched_timer+0x51/0x94)
[ 7884.510000] [<c004e8fd>] (tick_sched_timer+0x51/0x94) from [<c0045527>] (__run_hrtimer+0x4f/0x1e8)
[ 7884.510000] [<c0045527>] (__run_hrtimer+0x4f/0x1e8) from [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4)
[ 7884.510000] [<c0046003>] (hrtimer_interrupt+0xd7/0x1e4) from [<c00101d3>] (twd_handler+0x17/0x24)
[ 7884.510000] [<c00101d3>] (twd_handler+0x17/0x24) from [<c006be39>] (handle_percpu_devid_irq+0x59/0x114)
[ 7884.510000] [<c006be39>] (handle_percpu_devid_irq+0x59/0x114) from [<c0069aab>] (generic_handle_irq+0x17/0x2c)
[ 7884.510000] [<c0069aab>] (generic_handle_irq+0x17/0x2c) from [<c000cc8d>] (handle_IRQ+0x35/0x7c)
[ 7884.510000] [<c000cc8d>] (handle_IRQ+0x35/0x7c) from [<c033b153>] (__irq_svc+0x33/0xb8)
[ 7884.510000] [<c033b153>] (__irq_svc+0x33/0xb8) from [<c0244b06>] (xgmac_rx_refill+0x3a/0x140)
[ 7884.510000] [<c0244b06>] (xgmac_rx_refill+0x3a/0x140) from [<c02458ed>] (xgmac_poll+0x265/0x3bc)
[ 7884.510000] [<c02458ed>] (xgmac_poll+0x265/0x3bc) from [<c029fcbf>] (net_rx_action+0xc3/0x200)
[ 7884.510000] [<c029fcbf>] (net_rx_action+0xc3/0x200) from [<c0030cab>] (__do_softirq+0xa3/0x1bc)
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
drivers/net/ethernet/calxeda/xgmac.c | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index c4fd2e3..3ca1d79 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -671,26 +671,23 @@ static void xgmac_rx_refill(struct xgmac_priv *priv)
p = priv->dma_rx + entry;
- if (priv->rx_skbuff[entry] != NULL)
- continue;
-
- skb = __skb_dequeue(&priv->rx_recycle);
- if (skb == NULL)
- skb = netdev_alloc_skb(priv->dev, priv->dma_buf_sz);
- if (unlikely(skb == NULL))
- break;
-
- priv->rx_skbuff[entry] = skb;
- paddr = dma_map_single(priv->device, skb->data,
- priv->dma_buf_sz, DMA_FROM_DEVICE);
- desc_set_buf_addr(p, paddr, priv->dma_buf_sz);
+ if (priv->rx_skbuff[entry] == NULL) {
+ skb = __skb_dequeue(&priv->rx_recycle);
+ if (skb == NULL)
+ skb = netdev_alloc_skb(priv->dev, priv->dma_buf_sz);
+ if (unlikely(skb == NULL))
+ break;
+
+ priv->rx_skbuff[entry] = skb;
+ paddr = dma_map_single(priv->device, skb->data,
+ priv->dma_buf_sz, DMA_FROM_DEVICE);
+ desc_set_buf_addr(p, paddr, priv->dma_buf_sz);
+ }
netdev_dbg(priv->dev, "rx ring: head %d, tail %d\n",
priv->rx_head, priv->rx_tail);
priv->rx_head = dma_ring_incr(priv->rx_head, DMA_RX_RING_SZ);
- /* Ensure descriptor is in memory before handing to h/w */
- wmb();
desc_set_rx_owner(p);
}
}
--
1.7.9.5
next prev parent reply other threads:[~2012-07-10 0:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-10 0:16 [PATCH 0/4] Calxeda xgmac fixes and performance improvements Rob Herring
2012-07-10 0:16 ` [PATCH 1/4] net: calxedaxgmac: fix net timeout recovery Rob Herring
2012-07-10 0:16 ` Rob Herring [this message]
2012-07-10 0:16 ` [PATCH 3/4] net: calxedaxgmac: set outstanding AXI bus transactions to 8 Rob Herring
2012-07-10 0:16 ` [PATCH 4/4] net: calxedaxgmac: enable rx cut-thru mode Rob Herring
2012-07-11 6:27 ` [PATCH 0/4] Calxeda xgmac fixes and performance improvements David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341879370-23385-3-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rob.herring@calxeda.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).