From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Alexander Duyck <alexander.h.duyck@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 6/9] ixgbe: Update configure virtualization to allow for multiple PF pools
Date: Wed, 18 Jul 2012 13:31:53 -0700 [thread overview]
Message-ID: <1342643516-2696-7-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1342643516-2696-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This change allows all pools from the default pool forward to be enabled vi
ixgbe_configure_virtualization. This is needed as we are planning to use
queues belonging to adjacent pools for FCoE when SR-IOV and FCoE are both
enabled.
In addition this patch contains some minor formatting changes as there were
a few spots that seemed to be in need of some cleanup.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 2b4b791..ea94fa2 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3130,28 +3130,28 @@ static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter)
static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
- u32 gcr_ext;
- u32 vt_reg_bits;
u32 reg_offset, vf_shift;
- u32 vmdctl;
+ u32 gcr_ext, vmdctl;
int i;
if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
return;
vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
- vt_reg_bits = IXGBE_VMD_CTL_VMDQ_EN | IXGBE_VT_CTL_REPLEN;
- vt_reg_bits |= (adapter->num_vfs << IXGBE_VT_CTL_POOL_SHIFT);
- IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits);
+ vmdctl |= IXGBE_VMD_CTL_VMDQ_EN;
+ vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
+ vmdctl |= (adapter->num_vfs << IXGBE_VT_CTL_POOL_SHIFT);
+ vmdctl |= IXGBE_VT_CTL_REPLEN;
+ IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
vf_shift = adapter->num_vfs % 32;
reg_offset = (adapter->num_vfs >= 32) ? 1 : 0;
/* Enable only the PF's pool for Tx/Rx */
- IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift));
- IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (1 << vf_shift));
- IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (~0) << vf_shift);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), reg_offset - 1);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (~0) << vf_shift);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), reg_offset - 1);
IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
/* Map PF MAC address in RAR Entry 0 to first pool following VFs */
@@ -3168,9 +3168,9 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
/* enable Tx loopback for VF/PF communication */
IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
+
/* Enable MAC Anti-Spoofing */
- hw->mac.ops.set_mac_anti_spoofing(hw,
- (adapter->num_vfs != 0),
+ hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0),
adapter->num_vfs);
/* For VFs that have spoof checking turned off */
for (i = 0; i < adapter->num_vfs; i++) {
--
1.7.10.4
next prev parent reply other threads:[~2012-07-18 20:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-18 20:31 [net-next 0/9][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-07-18 20:31 ` [net-next 1/9] ixgbevf: fix VF untagging when 802.1 prio is set Jeff Kirsher
2012-07-18 20:31 ` [net-next 2/9] ixgbevf: Do not rewind the Rx ring before bumping tail Jeff Kirsher
2012-07-18 20:31 ` [net-next 3/9] ixgbevf: Add netdev to ring structure Jeff Kirsher
2012-07-18 20:31 ` [net-next 4/9] ixgbevf: Consolidate Tx context descriptor creation code Jeff Kirsher
2012-07-18 20:31 ` [net-next 5/9] ixgbevf: Fix multiple issues in ixgbevf_get/set_ringparam Jeff Kirsher
2012-07-18 20:31 ` Jeff Kirsher [this message]
2012-07-18 20:31 ` [net-next 7/9] ixgbe: Add support for SR-IOV w/ DCB or RSS Jeff Kirsher
2012-07-18 20:31 ` [net-next 8/9] ixgbe: Retire RSS enabled and capable flags Jeff Kirsher
2012-07-18 20:31 ` [net-next 9/9] ixgbe: Cleanup holes in flags after removing several of them Jeff Kirsher
2012-07-19 8:33 ` David Laight
2012-07-19 16:11 ` Alexander Duyck
2012-07-19 15:26 ` [net-next 0/9][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342643516-2696-7-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).