From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Alexander Duyck <alexander.h.duyck@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 4/9] ixgbe: Cleanup configuration of FCoE registers
Date: Thu, 19 Jul 2012 18:24:01 -0700 [thread overview]
Message-ID: <1342747446-16132-5-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1342747446-16132-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This change makes it so we always use the FCoE redirection table. We just
set all 8 entries to the same value in the case of only having one queue
for FCoE.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 58 +++++++++++++------------
drivers/net/ethernet/intel/ixgbe/ixgbe_type.h | 1 +
2 files changed, 32 insertions(+), 27 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 9b0909f..a994570 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -618,6 +618,7 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
struct ixgbe_fcoe *fcoe = &adapter->fcoe;
struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
unsigned int cpu;
+ u32 etqf;
if (!fcoe->pool) {
spin_lock_init(&fcoe->lock);
@@ -665,40 +666,43 @@ void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
}
}
- /* Enable L2 eth type filter for FCoE */
- IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE),
- (ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN));
- /* Enable L2 eth type filter for FIP */
- IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FIP),
- (ETH_P_FIP | IXGBE_ETQF_FILTER_EN));
- if (adapter->ring_feature[RING_F_FCOE].indices) {
- /* Use multiple rx queues for FCoE by redirection table */
- for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
- fcoe_i = f->offset + i % f->indices;
- fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
- fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
- IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
- }
- IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
- IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
- } else {
- /* Use single rx queue for FCoE */
- fcoe_i = f->offset;
+ /* Enable L2 EtherType filter for FCoE, necessary for FCoE Rx CRC */
+ etqf = ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN;
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ etqf |= IXGBE_ETQF_POOL_ENABLE;
+ etqf |= VMDQ_P(0) << IXGBE_ETQF_POOL_SHIFT;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE), etqf);
+ IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
+
+ /* Use one or more Rx queues for FCoE by redirection table */
+ for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
+ fcoe_i = f->offset + (i % f->indices);
+ fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
- IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0);
- IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE),
- IXGBE_ETQS_QUEUE_EN |
- (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
+ IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
}
- /* send FIP frames to the first FCoE queue */
- fcoe_i = f->offset;
- fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
+
+ /* Enable L2 EtherType filter for FIP */
+ etqf = ETH_P_FIP | IXGBE_ETQF_FILTER_EN;
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ etqf |= IXGBE_ETQF_POOL_ENABLE;
+ etqf |= VMDQ_P(0) << IXGBE_ETQF_POOL_SHIFT;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FIP), etqf);
+
+ /* Send FIP frames to the first FCoE queue */
+ fcoe_q = adapter->rx_ring[f->offset]->reg_idx;
IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
IXGBE_ETQS_QUEUE_EN |
(fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
- IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, IXGBE_FCRXCTRL_FCCRCBO |
+ /* Configure FCoE Rx control */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
+ IXGBE_FCRXCTRL_FCCRCBO |
(FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
+
return;
out_pcpu_noddp_extra_buff_alloc_fail:
free_percpu(fcoe->pcpu_noddp);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index 7416d22..482a33b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -1452,6 +1452,7 @@ enum {
#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */
#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */
#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */
+#define IXGBE_ETQF_POOL_SHIFT 20
#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */
#define IXGBE_ETQS_RX_QUEUE_SHIFT 16
--
1.7.10.4
next prev parent reply other threads:[~2012-07-20 1:24 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-20 1:23 [net-next 0/9][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-07-20 1:23 ` [net-next 1/9] ixgbe: Use VMDq offset to indicate the default pool Jeff Kirsher
2012-07-20 1:23 ` [net-next 2/9] ixgbe: Fix memory leak when SR-IOV VFs are direct assigned Jeff Kirsher
2012-07-20 1:24 ` [net-next 3/9] ixgbe: Drop references to deprecated pci_ DMA api and instead use dma_ API Jeff Kirsher
2012-07-20 1:24 ` Jeff Kirsher [this message]
2012-07-20 1:24 ` [net-next 5/9] ixgbe: Merge all FCoE percpu values into a single structure Jeff Kirsher
2012-07-20 1:24 ` [net-next 6/9] ixgbe: Make FCoE allocation and configuration closer to how rings work Jeff Kirsher
2012-07-20 1:24 ` [net-next 7/9] ixgbe: Correctly set SAN MAC RAR pool to default pool of PF Jeff Kirsher
2012-07-20 1:24 ` [net-next 8/9] ixgbe: Only enable anti-spoof on VF pools Jeff Kirsher
2012-07-20 1:24 ` [net-next 9/9] ixgbe: Enable FCoE FSO and CRC offloads based on CAPABLE instead of ENABLED flag Jeff Kirsher
2012-07-20 18:13 ` [net-next 0/9][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342747446-16132-5-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).