From: Ian Molton <ian.molton@codethink.co.uk>
To: linux-arm-kernel@lists.infradead.org
Cc: andrew@lunn.ch, thomas.petazzoni@free-electrons.com,
ben.dooks@codethink.co.uk, arnd@arndb.de, netdev@vger.kernel.org
Subject: [PATCH v2 0/6] mv643xx Ethernet DT support and CSB1724 board support.
Date: Tue, 31 Jul 2012 16:45:23 +0100 [thread overview]
Message-ID: <1343749529-17571-1-git-send-email-ian.molton@codethink.co.uk> (raw)
Respin of the previous patch. All comments have been addressed.
Addressed:
* Typos
* Docs
* Automatic clock detection / setup
* PHY addresses are not | 0x80 anymore
- which is a horrid way for the driver to be doing things but hey...
* property added to DT bindings for tx_csum_limit
* GFP_ATOMIC allocations demoted to GFP_KERNEL (cpoypaste error)
* devide order in .dts(i) files fixed
Outstanding:
* Should the tx_csum_limit issue be addressed by:
- a new device name
- detecting the host platform
- a property (present solution).
Ian Molton (6):
Initial csb1724 board support (FDT)
mv643xx.c: Remove magic numbers.
mv643xx.c: Add basic device tree support.
kirkwood: Add a clock setup helper for mv643xx ethernet.
csb1724: Enable device tree based mv643xx ethernet support.
DT: Convert all kirkwood boards with mv643xx that use DT
Documentation/devicetree/bindings/net/mv643xx.txt | 75 +++++++++++++
arch/arm/boot/dts/kirkwood-csb1724.dts | 49 +++++++++
arch/arm/boot/dts/kirkwood-dnskw.dtsi | 9 ++
arch/arm/boot/dts/kirkwood-dreamplug.dts | 18 +++
arch/arm/boot/dts/kirkwood-goflexnet.dts | 8 ++
arch/arm/boot/dts/kirkwood-ib62x0.dts | 10 ++
arch/arm/boot/dts/kirkwood-iconnect.dts | 10 ++
arch/arm/boot/dts/kirkwood-lsxl.dtsi | 17 +++
arch/arm/boot/dts/kirkwood-ts219-6281.dts | 8 +-
arch/arm/boot/dts/kirkwood-ts219-6282.dts | 8 +-
arch/arm/boot/dts/kirkwood-ts219.dtsi | 3 +
arch/arm/boot/dts/kirkwood.dtsi | 33 ++++++
arch/arm/configs/csb1724_defconfig | 92 ++++++++++++++++
arch/arm/mach-kirkwood/Kconfig | 7 ++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/Makefile.boot | 1 +
arch/arm/mach-kirkwood/board-csb1724.c | 60 ++++++++++
arch/arm/mach-kirkwood/board-dnskw.c | 7 +-
arch/arm/mach-kirkwood/board-dreamplug.c | 13 +--
arch/arm/mach-kirkwood/board-dt.c | 11 ++
arch/arm/mach-kirkwood/board-goflexnet.c | 7 +-
arch/arm/mach-kirkwood/board-ib62x0.c | 7 +-
arch/arm/mach-kirkwood/board-iconnect.c | 7 +-
arch/arm/mach-kirkwood/board-lsxl.c | 13 +--
arch/arm/mach-kirkwood/board-ts219.c | 10 +-
arch/arm/mach-kirkwood/common.c | 22 ++++
arch/arm/mach-kirkwood/common.h | 9 ++
drivers/net/ethernet/marvell/mv643xx_eth.c | 122 ++++++++++++++++++---
28 files changed, 565 insertions(+), 72 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mv643xx.txt
create mode 100644 arch/arm/boot/dts/kirkwood-csb1724.dts
create mode 100644 arch/arm/configs/csb1724_defconfig
create mode 100644 arch/arm/mach-kirkwood/board-csb1724.c
--
1.7.9.5
next reply other threads:[~2012-07-31 15:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-31 15:45 Ian Molton [this message]
2012-07-31 15:45 ` [PATCH v2 1/6] Initial csb1724 board support (FDT) Ian Molton
2012-07-31 16:43 ` Andrew Lunn
2012-07-31 15:45 ` [PATCH v2 2/6] mv643xx.c: Remove magic numbers Ian Molton
2012-07-31 15:45 ` [PATCH v2 3/6] mv643xx.c: Add basic device tree support Ian Molton
2012-07-31 16:46 ` Andrew Lunn
2012-08-01 8:50 ` Ian Molton
2012-07-31 18:23 ` Arnd Bergmann
2012-07-31 19:24 ` Andrew Lunn
2012-07-31 20:18 ` Arnd Bergmann
2012-07-31 15:45 ` [PATCH v2 4/6] kirkwood: Add a clock setup helper for mv643xx ethernet Ian Molton
2012-07-31 15:45 ` [PATCH v2 5/6] csb1724: Enable device tree based mv643xx ethernet support Ian Molton
2012-07-31 15:45 ` [PATCH v2 6/6] DT: Convert all kirkwood boards with mv643xx that use DT Ian Molton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343749529-17571-1-git-send-email-ian.molton@codethink.co.uk \
--to=ian.molton@codethink.co.uk \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=ben.dooks@codethink.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=netdev@vger.kernel.org \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).