netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ian Molton <ian.molton@codethink.co.uk>
To: linux-arm-kernel@lists.infradead.org
Cc: andrew@lunn.ch, thomas.petazzoni@free-electrons.com,
	ben.dooks@codethink.co.uk, arnd@arndb.de, netdev@vger.kernel.org
Subject: [PATCH v3 5/7] csb1724: Enable device tree based mv643xx ethernet support.
Date: Tue,  7 Aug 2012 15:34:50 +0100	[thread overview]
Message-ID: <1344350092-24050-6-git-send-email-ian.molton@codethink.co.uk> (raw)
In-Reply-To: <1344350092-24050-1-git-send-email-ian.molton@codethink.co.uk>

        This patch enables mv643xx based ethernet built into the SoM on the
        csb1724, via flattened device tree.

        Signed-off-by: Ian Molton <ian.molton@codethink.co.uk>
---
 arch/arm/boot/dts/kirkwood-csb1724.dts |   19 ++++++++++++++++++
 arch/arm/boot/dts/kirkwood.dtsi        |   33 ++++++++++++++++++++++++++++++++
 arch/arm/mach-kirkwood/board-csb1724.c |    1 +
 3 files changed, 53 insertions(+)

diff --git a/arch/arm/boot/dts/kirkwood-csb1724.dts b/arch/arm/boot/dts/kirkwood-csb1724.dts
index 44dfe9a..f43f8dd 100644
--- a/arch/arm/boot/dts/kirkwood-csb1724.dts
+++ b/arch/arm/boot/dts/kirkwood-csb1724.dts
@@ -25,6 +25,25 @@
 			nr-ports = <2>;
 			status = "ok";
 		};
+
+		smi0: mdio@72000 {
+			status = "ok";
+		};
+
+		smi1: mdio@76000 {
+			status = "ok";
+		};
+
+		egiga0 {
+			phy_addr = <0>;
+			status = "ok";
+		};
+
+		egiga1 {
+			phy_addr = <1>;
+			status = "ok";
+		};
+
 	};
 
 };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index cef9616..f5f1f92 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -76,6 +76,39 @@
 			status = "okay";
 		};
 
+		smi0: mdio@72000 {
+			compatible = "marvell,mdio-mv643xx";
+			reg = <0x72000 0x4000>;
+			interrupts = <46>;
+			tx_csum_limit = <1600>;
+			status = "disabled";
+		};
+
+		egiga0 {
+			compatible = "marvell,mv643xx-eth";
+			reg = <0x72000 0x4000>;
+			mdio = <&smi0>;
+			interrupts = <11>;
+			status = "disabled";
+		};
+
+		smi1: mdio@76000 {
+			compatible = "marvell,mdio-mv643xx";
+			reg = <0x76000 0x4000>;
+			interrupts = <47>;
+			shared_smi = <&smi0>;
+			tx_csum_limit = <1600>;
+			status = "disabled";
+		};
+
+		egiga1 {
+			compatible = "marvell,mv643xx-eth";
+			reg = <0x76000 0x4000>;
+			mdio = <&smi1>;
+			interrupts = <15>;
+			status = "disabled";
+		};
+
 		sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
diff --git a/arch/arm/mach-kirkwood/board-csb1724.c b/arch/arm/mach-kirkwood/board-csb1724.c
index 979112d..9c58b92 100644
--- a/arch/arm/mach-kirkwood/board-csb1724.c
+++ b/arch/arm/mach-kirkwood/board-csb1724.c
@@ -13,6 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include "common.h"
 #include "mpp.h"
 
 static unsigned int csb1724_mpp_config[] __initdata = {
-- 
1.7.9.5

  parent reply	other threads:[~2012-08-07 14:35 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-07 14:34 [PATCH v3 0/7] mv643xx.c: Add basic device tree support Ian Molton
2012-08-07 14:34 ` [PATCH v3 1/7] Initial csb1724 board support (FDT) Ian Molton
2012-08-07 14:34 ` [PATCH v3 2/7] mv643xx.c: Remove magic numbers Ian Molton
2012-08-07 14:34 ` [PATCH v3 3/7] mv643xx.c: Add basic device tree support Ian Molton
2012-08-07 14:56   ` Arnd Bergmann
2012-08-07 15:56     ` Ian Molton
     [not found]       ` <50213ACB.6040301-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
2012-08-07 20:25         ` Arnd Bergmann
2012-08-07 14:34 ` [PATCH v3 4/7] kirkwood: Add fixups for DT based mv643xx ethernet Ian Molton
2012-08-07 14:34 ` Ian Molton [this message]
2012-08-07 14:34 ` [PATCH v3 6/7] DT: Convert all kirkwood boards with mv643xx that use DT Ian Molton
2012-08-07 14:34 ` [PATCH v3 7/7] NET: mv643xx: remove device name macro Ian Molton
2012-08-07 23:29 ` [PATCH v3 0/7] mv643xx.c: Add basic device tree support David Miller
2012-08-08  0:31   ` Matt Sealey
2012-08-08  8:16   ` Arnd Bergmann
2012-08-08  8:59     ` David Miller
2012-08-08  9:40     ` Ian Molton
2012-08-08  9:42       ` Ian Molton
2012-08-08 11:51       ` Ian Molton
2012-08-08 12:39         ` Arnd Bergmann
2012-08-08 13:19           ` Ian Molton
2012-08-09 10:59             ` Ian Molton
2012-08-09 11:43               ` Arnd Bergmann
2012-08-09 15:21                 ` Ian Molton
2012-08-10 10:49                   ` Arnd Bergmann
2012-08-13 10:00                     ` Ian Molton
2012-08-16 16:30                       ` Ian Molton
     [not found]                         ` <502D201E.9030304-4yDnlxn2s6sWdaTGBSpHTA@public.gmane.org>
2012-09-10 14:22                           ` Arnd Bergmann
     [not found]                             ` <201209101422.13875.arnd-r2nGTMty4D4@public.gmane.org>
2012-09-11  6:03                               ` Benjamin Herrenschmidt
2012-10-21  1:52                                 ` Jason Cooper
2012-08-17 12:13                       ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1344350092-24050-6-git-send-email-ian.molton@codethink.co.uk \
    --to=ian.molton@codethink.co.uk \
    --cc=andrew@lunn.ch \
    --cc=arnd@arndb.de \
    --cc=ben.dooks@codethink.co.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).