From: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
To: davem@davemloft.net
Cc: Emil Tantilov <emil.s.tantilov@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Subject: [net 2/3] e1000e: fix panic while dumping packets on Tx hang with IOMMU
Date: Thu, 9 Aug 2012 02:39:11 -0700 [thread overview]
Message-ID: <1344505152-28167-3-git-send-email-peter.p.waskiewicz.jr@intel.com> (raw)
In-Reply-To: <1344505152-28167-1-git-send-email-peter.p.waskiewicz.jr@intel.com>
From: Emil Tantilov <emil.s.tantilov@intel.com>
This patch resolves a "BUG: unable to handle kernel paging request at ..."
oops while dumping packet data. The issue occurs with IOMMU enabled due to
the address provided by phys_to_virt().
This patch avoids phys_to_virt() by using skb->data and the address of the
pages allocated for Rx.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 36 +++++++++++++++++++++---------
1 file changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 95b2453..46c3b1f 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -178,6 +178,24 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
pr_info("%-15s %08x %08x\n", rname, regs[0], regs[1]);
}
+static void e1000e_dump_ps_pages(struct e1000_adapter *adapter,
+ struct e1000_buffer *bi)
+{
+ int i;
+ struct e1000_ps_page *ps_page;
+
+ for (i = 0; i < adapter->rx_ps_pages; i++) {
+ ps_page = &bi->ps_pages[i];
+
+ if (ps_page->page) {
+ pr_info("packet dump for ps_page %d:\n", i);
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
+ 16, 1, page_address(ps_page->page),
+ PAGE_SIZE, true);
+ }
+ }
+}
+
/*
* e1000e_dump - Print registers, Tx-ring and Rx-ring
*/
@@ -299,10 +317,10 @@ static void e1000e_dump(struct e1000_adapter *adapter)
(unsigned long long)buffer_info->time_stamp,
buffer_info->skb, next_desc);
- if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
+ if (netif_msg_pktdata(adapter) && buffer_info->skb)
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
- 16, 1, phys_to_virt(buffer_info->dma),
- buffer_info->length, true);
+ 16, 1, buffer_info->skb->data,
+ buffer_info->skb->len, true);
}
/* Print Rx Ring Summary */
@@ -381,10 +399,8 @@ rx_ring_summary:
buffer_info->skb, next_desc);
if (netif_msg_pktdata(adapter))
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS, 16, 1,
- phys_to_virt(buffer_info->dma),
- adapter->rx_ps_bsize0, true);
+ e1000e_dump_ps_pages(adapter,
+ buffer_info);
}
}
break;
@@ -444,12 +460,12 @@ rx_ring_summary:
(unsigned long long)buffer_info->dma,
buffer_info->skb, next_desc);
- if (netif_msg_pktdata(adapter))
+ if (netif_msg_pktdata(adapter) &&
+ buffer_info->skb)
print_hex_dump(KERN_INFO, "",
DUMP_PREFIX_ADDRESS, 16,
1,
- phys_to_virt
- (buffer_info->dma),
+ buffer_info->skb->data,
adapter->rx_buffer_len,
true);
}
--
1.7.11.2
next prev parent reply other threads:[~2012-08-09 9:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-09 9:39 [net 0/3][pull request] Intel Wired LAN Driver Updates Peter P Waskiewicz Jr
2012-08-09 9:39 ` [net 1/3] igb: fix panic while dumping packets on Tx hang with IOMMU Peter P Waskiewicz Jr
2012-08-09 9:39 ` Peter P Waskiewicz Jr [this message]
2012-08-09 9:39 ` [net 3/3] igb: Fix register defines for all non-82575 hardware Peter P Waskiewicz Jr
2012-08-09 10:42 ` [net 0/3][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344505152-28167-3-git-send-email-peter.p.waskiewicz.jr@intel.com \
--to=peter.p.waskiewicz.jr@intel.com \
--cc=davem@davemloft.net \
--cc=emil.s.tantilov@intel.com \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).