From: David Daney <ddaney.cavm@gmail.com>
To: linux-mips@linux-mips.org, ralf@linux-mips.org,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, David Daney <david.daney@cavium.com>
Subject: [PATCH 8/8] netdev: octeon_mgmt: Make multi-line comment style consistent.
Date: Tue, 21 Aug 2012 11:45:12 -0700 [thread overview]
Message-ID: <1345574712-21444-9-git-send-email-ddaney.cavm@gmail.com> (raw)
In-Reply-To: <1345574712-21444-1-git-send-email-ddaney.cavm@gmail.com>
From: David Daney <david.daney@cavium.com>
No code changes. Recent patches have used the netdev style multi-line
comment formatting, making the style inconsistent within octeon_mgmt.c
Update the remaining comment blocks to achieve style harmony.
Signed-off-by: David Daney <david.daney@cavium.com>
---
drivers/net/ethernet/octeon/octeon_mgmt.c | 27 +++++++++------------------
1 file changed, 9 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c
index ccb1f81..5be431c 100644
--- a/drivers/net/ethernet/octeon/octeon_mgmt.c
+++ b/drivers/net/ethernet/octeon/octeon_mgmt.c
@@ -34,8 +34,7 @@
#define OCTEON_MGMT_NAPI_WEIGHT 16
-/*
- * Ring sizes that are powers of two allow for more efficient modulo
+/* Ring sizes that are powers of two allow for more efficient modulo
* opertions.
*/
#define OCTEON_MGMT_RX_RING_SIZE 512
@@ -431,8 +430,7 @@ good:
netif_receive_skb(skb);
rc = 0;
} else if (re.s.code == RING_ENTRY_CODE_MORE) {
- /*
- * Packet split across skbs. This can happen if we
+ /* Packet split across skbs. This can happen if we
* increase the MTU. Buffers that are already in the
* rx ring can then end up being too small. As the rx
* ring is refilled, buffers sized for the new MTU
@@ -462,8 +460,7 @@ good:
} else {
/* Some other error, discard it. */
dev_kfree_skb_any(skb);
- /*
- * Error statistics are accumulated in
+ /* Error statistics are accumulated in
* octeon_mgmt_update_rx_stats.
*/
}
@@ -590,8 +587,7 @@ static void octeon_mgmt_set_rx_filtering(struct net_device *netdev)
cam_mode = 0;
available_cam_entries = 8;
} else {
- /*
- * One CAM entry for the primary address, leaves seven
+ /* One CAM entry for the primary address, leaves seven
* for the secondary addresses.
*/
available_cam_entries = 7 - netdev->uc.count;
@@ -663,8 +659,7 @@ static int octeon_mgmt_change_mtu(struct net_device *netdev, int new_mtu)
struct octeon_mgmt *p = netdev_priv(netdev);
int size_without_fcs = new_mtu + OCTEON_MGMT_RX_HEADROOM;
- /*
- * Limit the MTU to make sure the ethernet packets are between
+ /* Limit the MTU to make sure the ethernet packets are between
* 64 bytes and 16383 bytes.
*/
if (size_without_fcs < 64 || size_without_fcs > 16383) {
@@ -1044,8 +1039,7 @@ static int octeon_mgmt_open(struct net_device *netdev)
}
if (OCTEON_IS_MODEL(OCTEON_CN56XX_PASS1_X)
|| OCTEON_IS_MODEL(OCTEON_CN52XX_PASS1_X)) {
- /*
- * Force compensation values, as they are not
+ /* Force compensation values, as they are not
* determined properly by HW
*/
union cvmx_agl_gmx_drv_ctl drv_ctl;
@@ -1078,8 +1072,7 @@ static int octeon_mgmt_open(struct net_device *netdev)
octeon_mgmt_change_mtu(netdev, netdev->mtu);
- /*
- * Enable the port HW. Packets are not allowed until
+ /* Enable the port HW. Packets are not allowed until
* cvmx_mgmt_port_enable() is called.
*/
mix_ctl.u64 = 0;
@@ -1196,8 +1189,7 @@ static int octeon_mgmt_open(struct net_device *netdev)
rxx_frm_ctl.u64 = 0;
rxx_frm_ctl.s.ptp_mode = p->has_rx_tstamp ? 1 : 0;
rxx_frm_ctl.s.pre_align = 1;
- /*
- * When set, disables the length check for non-min sized pkts
+ /* When set, disables the length check for non-min sized pkts
* with padding in the client data.
*/
rxx_frm_ctl.s.pad_len = 1;
@@ -1215,8 +1207,7 @@ static int octeon_mgmt_open(struct net_device *netdev)
rxx_frm_ctl.s.ctl_drp = 1;
/* Strip off the preamble */
rxx_frm_ctl.s.pre_strp = 1;
- /*
- * This port is configured to send PREAMBLE+SFD to begin every
+ /* This port is configured to send PREAMBLE+SFD to begin every
* frame. GMX checks that the PREAMBLE is sent correctly.
*/
rxx_frm_ctl.s.pre_chk = 1;
--
1.7.11.4
next prev parent reply other threads:[~2012-08-21 18:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-21 18:45 [PATCH 0/8] netdev/MIPS: Improvements to octeon_mgmt Ethernet driver David Daney
2012-08-21 18:45 ` [PATCH 1/8] MIPS: Octeon: Add octeon_io_clk_delay() function David Daney
2012-08-21 18:45 ` [PATCH 2/8] netdev: octeon_mgmt: Add support for 1Gig ports David Daney
2012-08-21 18:45 ` [PATCH 3/8] netdev: octeon_mgmt: Add hardware timestamp support David Daney
2012-08-21 18:45 ` [PATCH 4/8] netdev: octeon_mgmt: Improve ethtool_ops David Daney
2012-08-21 18:45 ` [PATCH 5/8] netdev: octeon_mgmt: Set the parent device David Daney
2012-08-21 18:45 ` [PATCH 6/8] netdev: octeon_mgmt: Cleanup and modernize MAC address handling David Daney
2012-08-21 18:45 ` [PATCH 7/8] netdev: octeon_mgmt: Remove some useless 'inline' David Daney
2012-08-21 18:45 ` David Daney [this message]
2012-08-23 2:16 ` [PATCH 0/8] netdev/MIPS: Improvements to octeon_mgmt Ethernet driver David Miller
2012-08-23 6:35 ` John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345574712-21444-9-git-send-email-ddaney.cavm@gmail.com \
--to=ddaney.cavm@gmail.com \
--cc=davem@davemloft.net \
--cc=david.daney@cavium.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@linux-mips.org \
--cc=netdev@vger.kernel.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).