From: Malcolm Priestley <tvboxspy@gmail.com>
To: netdev@vger.kernel.org
Subject: [PATCH] staging: vt6656: [BUG] - Failed connection, incorrect endian.
Date: Wed, 29 Aug 2012 20:04:27 +0100 [thread overview]
Message-ID: <1346267067.1959.9.camel@router7789> (raw)
This patch fixes a bug with driver failing to negotiate a connection.
The bug was traced to commit
203e4615ee9d9fa8d3506b9d0ef30095e4d5bc90
staging: vt6656: removed custom definitions of Ethernet packet types
In that patch, definitions in include/linux/if_ether.h replaced ones
in tether.h which had both big and little endian definitions.
include/linux/if_ether.h only refers to big endian values, cpu_to_be16
should be used for the correct endian architectures.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
---
drivers/staging/vt6656/dpc.c | 2 +-
drivers/staging/vt6656/rxtx.c | 8 ++++----
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c
index e4bdf2a..3aa895e 100644
--- a/drivers/staging/vt6656/dpc.c
+++ b/drivers/staging/vt6656/dpc.c
@@ -200,7 +200,7 @@ s_vProcessRxMACHeader (
} else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) {
cbHeaderSize += 6;
pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
- if ((*pwType == cpu_to_le16(ETH_P_IPX)) ||
+ if ((*pwType == cpu_to_be16(ETH_P_IPX)) ||
(*pwType == cpu_to_le16(0xF380))) {
cbHeaderSize -= 8;
pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize);
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index bb46452..7035f13 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -1699,7 +1699,7 @@ s_bPacketToWirelessUsb(
// 802.1H
if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) {
if (pDevice->dwDiagRefCount == 0) {
- if ((psEthHeader->wType == cpu_to_le16(ETH_P_IPX)) ||
+ if ((psEthHeader->wType == cpu_to_be16(ETH_P_IPX)) ||
(psEthHeader->wType == cpu_to_le16(0xF380))) {
memcpy((PBYTE) (pbyPayloadHead),
abySNAP_Bridgetunnel, 6);
@@ -2838,7 +2838,7 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
Packet_Type = skb->data[ETH_HLEN+1];
Descriptor_type = skb->data[ETH_HLEN+1+1+2];
Key_info = (skb->data[ETH_HLEN+1+1+2+1] << 8)|(skb->data[ETH_HLEN+1+1+2+2]);
- if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
+ if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
/* 802.1x OR eapol-key challenge frame transfer */
if (((Protocol_Version == 1) || (Protocol_Version == 2)) &&
(Packet_Type == 3)) {
@@ -2987,7 +2987,7 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
}
}
- if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) {
+ if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) {
if (pDevice->byBBType != BB_TYPE_11A) {
pDevice->wCurrentRate = RATE_1M;
pDevice->byACKRate = RATE_1M;
@@ -3015,7 +3015,7 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb)
if (bNeedEncryption == TRUE) {
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType));
- if ((pDevice->sTxEthHeader.wType) == cpu_to_le16(ETH_P_PAE)) {
+ if ((pDevice->sTxEthHeader.wType) == cpu_to_be16(ETH_P_PAE)) {
bNeedEncryption = FALSE;
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType));
if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) {
--
1.7.10.4
reply other threads:[~2012-08-29 19:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346267067.1959.9.camel@router7789 \
--to=tvboxspy@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).