netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-can@vger.kernel.org,
	"Benoît Locher" <Benoit.Locher@skf.com>,
	stable@vger.kernel.org, "Marc Kleine-Budde" <mkl@pengutronix.de>
Subject: [PATCH] can: mcp251x: avoid repeated frame bug
Date: Tue,  4 Sep 2012 22:55:42 +0200	[thread overview]
Message-ID: <1346792142-17609-2-git-send-email-mkl@pengutronix.de> (raw)
In-Reply-To: <1346792142-17609-1-git-send-email-mkl@pengutronix.de>

From: Benoît Locher <Benoit.Locher@skf.com>

The MCP2515 has a silicon bug causing repeated frame transmission, see section
5 of MCP2515 Rev. B Silicon Errata Revision G (March 2007).

Basically, setting TXBnCTRL.TXREQ in either SPI mode (00 or 11) will eventually
cause the bug. The workaround proposed by Microchip is to use mode 00 and send
a RTS command on the SPI bus to initiate the transmission.

Cc: <stable@vger.kernel.org>
Signed-off-by: Benoît Locher <Benoit.Locher@skf.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/mcp251x.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index a580db2..26e7129 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -83,6 +83,11 @@
 #define INSTRUCTION_LOAD_TXB(n)	(0x40 + 2 * (n))
 #define INSTRUCTION_READ_RXB(n)	(((n) == 0) ? 0x90 : 0x94)
 #define INSTRUCTION_RESET	0xC0
+#define RTS_TXB0		0x01
+#define RTS_TXB1		0x02
+#define RTS_TXB2		0x04
+#define INSTRUCTION_RTS(n)	(0x80 | ((n) & 0x07))
+
 
 /* MPC251x registers */
 #define CANSTAT	      0x0e
@@ -397,6 +402,7 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf,
 static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
 			  int tx_buf_idx)
 {
+	struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
 	u32 sid, eid, exide, rtr;
 	u8 buf[SPI_TRANSFER_BUF_LEN];
 
@@ -418,7 +424,10 @@ static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame,
 	buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc;
 	memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc);
 	mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx);
-	mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ);
+
+	/* use INSTRUCTION_RTS, to avoid "repeated frame problem" */
+	priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx);
+	mcp251x_spi_trans(priv->spi, 1);
 }
 
 static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf,
-- 
1.7.10


  reply	other threads:[~2012-09-04 20:55 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-04 20:55 pull-request: can 2012-09-04 Marc Kleine-Budde
2012-09-04 20:55 ` Marc Kleine-Budde [this message]
2012-09-05 19:12 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1346792142-17609-2-git-send-email-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=Benoit.Locher@skf.com \
    --cc=davem@davemloft.net \
    --cc=linux-can@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).