From: Vincent Bernat <bernat@luffy.cx>
To: netdev@vger.kernel.org
Cc: Vincent Bernat <bernat@luffy.cx>
Subject: [PATCH] Fix "ip -6 route add ... nexthop"
Date: Thu, 6 Sep 2012 19:30:49 +0200 [thread overview]
Message-ID: <1346952649-5716-2-git-send-email-bernat@luffy.cx> (raw)
In-Reply-To: <1346952649-5716-1-git-send-email-bernat@luffy.cx>
IPv6 multipath routes were not accepted by "ip route" because an IPv4
address was expected for each gateway. Use `get_addr()` instead of
`get_addr32()`.
Signed-off-by: Vincent Bernat <bernat@luffy.cx>
---
ip/iproute.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/ip/iproute.c b/ip/iproute.c
index 522dd28..c78d4f7 100644
--- a/ip/iproute.c
+++ b/ip/iproute.c
@@ -624,16 +624,20 @@ int print_route(const struct sockaddr_nl *who, struct nlmsghdr *n, void *arg)
}
-int parse_one_nh(struct rtattr *rta, struct rtnexthop *rtnh, int *argcp, char ***argvp)
+int parse_one_nh(struct rtmsg *r, struct rtattr *rta, struct rtnexthop *rtnh, int *argcp, char ***argvp)
{
int argc = *argcp;
char **argv = *argvp;
while (++argv, --argc > 0) {
if (strcmp(*argv, "via") == 0) {
+ inet_prefix addr;
NEXT_ARG();
- rta_addattr32(rta, 4096, RTA_GATEWAY, get_addr32(*argv));
- rtnh->rtnh_len += sizeof(struct rtattr) + 4;
+ get_addr(&addr, *argv, r->rtm_family);
+ if (r->rtm_family == AF_UNSPEC)
+ r->rtm_family = addr.family;
+ rta_addattr_l(rta, 4096, RTA_GATEWAY, &addr.data, addr.bytelen);
+ rtnh->rtnh_len += sizeof(struct rtattr) + addr.bytelen;
} else if (strcmp(*argv, "dev") == 0) {
NEXT_ARG();
if ((rtnh->rtnh_ifindex = ll_name_to_index(*argv)) == 0) {
@@ -685,7 +689,7 @@ int parse_nexthops(struct nlmsghdr *n, struct rtmsg *r, int argc, char **argv)
memset(rtnh, 0, sizeof(*rtnh));
rtnh->rtnh_len = sizeof(*rtnh);
rta->rta_len += rtnh->rtnh_len;
- parse_one_nh(rta, rtnh, &argc, &argv);
+ parse_one_nh(r, rta, rtnh, &argc, &argv);
rtnh = RTNH_NEXT(rtnh);
}
--
1.7.10.4
next prev parent reply other threads:[~2012-09-06 17:48 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-06 17:30 IPv6 multipath routes Vincent Bernat
2012-09-06 17:30 ` Vincent Bernat [this message]
2012-09-06 17:53 ` [PATCH] Fix "ip -6 route add ... nexthop" Vincent Bernat
2012-09-12 8:29 ` [RFC PATCH net-next 0/1] Add support of ECMPv6 Nicolas Dichtel
2012-09-12 8:29 ` [RFC PATCH net-next 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-09-12 8:48 ` YOSHIFUJI Hideaki
2012-09-12 9:42 ` YOSHIFUJI Hideaki
2012-09-12 9:53 ` Nicolas Dichtel
2012-09-14 7:59 ` [RFC PATCH net-next v2 0/1] Add support of ECMPv6 Nicolas Dichtel
2012-09-14 7:59 ` [RFC PATCH net-next v2 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-09-14 9:40 ` [RFC PATCH net-next v2 0/1] Add support of ECMPv6 Vincent Bernat
2012-09-14 13:35 ` Nicolas Dichtel
2012-09-14 13:37 ` Nicolas Dichtel
2012-10-15 12:36 ` Vincent Bernat
2012-10-15 19:54 ` Vincent Bernat
2012-09-19 9:18 ` [PATCH net-next v3 " Nicolas Dichtel
2012-09-19 9:18 ` [PATCH net-next v3 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-09-20 21:15 ` David Miller
2012-09-21 9:59 ` [PATCH net-next v4 0/1] Add support of ECMPv6 Nicolas Dichtel
2012-09-21 9:59 ` [PATCH net-next v4 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-09-21 17:48 ` [PATCH net-next v4 0/1] Add support of ECMPv6 David Miller
2012-09-24 12:28 ` Nicolas Dichtel
2012-10-01 13:56 ` [PATCH net-next v5 " Nicolas Dichtel
2012-10-01 13:56 ` [PATCH net-next v5 1/1] ipv6: add support of ECMP Nicolas Dichtel
2012-10-01 16:47 ` Joe Perches
2012-10-02 16:02 ` [PATCH net-next v6 0/1] Add support of ECMPv6 Nicolas Dichtel
2012-10-02 16:02 ` [PATCH net-next v6 1/1] ipv6: add support of equal cost multipath (ECMP) Nicolas Dichtel
2012-10-02 16:06 ` Nicolas Dichtel
2012-10-02 16:14 ` Eric Dumazet
2012-10-19 9:13 ` [PATCH net-next v7 0/1] Add support of ECMPv6 nicolas.dichtel
2012-10-19 9:13 ` [PATCH net-next v7 1/1] ipv6: add support of equal cost multipath (ECMP) nicolas.dichtel
2012-10-22 0:41 ` David Miller
2012-10-22 13:42 ` [PATCH net-next v8 0/1] Add support of ECMPv6 nicolas.dichtel
2012-10-22 13:42 ` [PATCH net-next v8 1/1] ipv6: add support of equal cost multipath (ECMP) nicolas.dichtel
2012-10-23 6:39 ` David Miller
2012-10-23 12:42 ` [PATCH iproute2 1/2] ip: fix "ip -6 route add ... nexthop" Nicolas Dichtel
2012-10-23 12:42 ` [PATCH iproute2 2/2] ip: remove NLM_F_EXCL in case of ECMPv6 routes Nicolas Dichtel
2012-10-25 16:06 ` Stephen Hemminger
2012-10-25 16:20 ` Nicolas Dichtel
2012-10-25 16:25 ` Stephen Hemminger
2012-10-25 16:48 ` Nicolas Dichtel
2012-11-02 8:58 ` [RESEND PATCH net-next] ipv6/multipath: remove flag NLM_F_EXCL after the first nexthop Nicolas Dichtel
2012-11-03 1:38 ` David Miller
2012-11-05 8:30 ` Nicolas Dichtel
2012-10-25 16:08 ` [PATCH iproute2 1/2] ip: fix "ip -6 route add ... nexthop" Stephen Hemminger
2012-10-02 18:43 ` [PATCH net-next v6 1/1] ipv6: add support of equal cost multipath (ECMP) David Miller
2012-09-11 12:57 ` IPv6 multipath routes Ulrich Weber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346952649-5716-2-git-send-email-bernat@luffy.cx \
--to=bernat@luffy.cx \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).