From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Mark Rustad <mark.d.rustad@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 8/8] ixgbe: Improve statistics accuracy for DDP traffic
Date: Sun, 16 Sep 2012 21:15:42 -0700 [thread overview]
Message-ID: <1347855342-6610-9-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1347855342-6610-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Mark Rustad <mark.d.rustad@intel.com>
Noticed that the byte and packet count statistics are under-
counting traffic handled by the DDP offload when there is more
than one DDP completion processed in a single call to
ixgbe_clean_rx_irq. This patch fixes that.
I tried to optimize the setting of the rss value so that it
only would have to be computed once, and only when there is
a DDP completion present.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 32 +++++++++++++--------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index b3b846b..2dc9d91 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1785,7 +1785,8 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
#ifdef IXGBE_FCOE
struct ixgbe_adapter *adapter = q_vector->adapter;
- int ddp_bytes = 0;
+ int ddp_bytes;
+ unsigned int mss = 0;
#endif /* IXGBE_FCOE */
u16 cleaned_count = ixgbe_desc_unused(rx_ring);
@@ -1839,6 +1840,20 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
/* if ddp, not passing to ULD unless for FCP_RSP or error */
if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) {
ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb);
+ /* include DDPed FCoE data */
+ if (ddp_bytes > 0) {
+ if (!mss) {
+ mss = rx_ring->netdev->mtu -
+ sizeof(struct fcoe_hdr) -
+ sizeof(struct fc_frame_header) -
+ sizeof(struct fcoe_crc_eof);
+ if (mss > 512)
+ mss &= ~511;
+ }
+ total_rx_bytes += ddp_bytes;
+ total_rx_packets += DIV_ROUND_UP(ddp_bytes,
+ mss);
+ }
if (!ddp_bytes) {
dev_kfree_skb_any(skb);
continue;
@@ -1852,21 +1867,6 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
budget--;
} while (likely(budget));
-#ifdef IXGBE_FCOE
- /* include DDPed FCoE data */
- if (ddp_bytes > 0) {
- unsigned int mss;
-
- mss = rx_ring->netdev->mtu - sizeof(struct fcoe_hdr) -
- sizeof(struct fc_frame_header) -
- sizeof(struct fcoe_crc_eof);
- if (mss > 512)
- mss &= ~511;
- total_rx_bytes += ddp_bytes;
- total_rx_packets += DIV_ROUND_UP(ddp_bytes, mss);
- }
-
-#endif /* IXGBE_FCOE */
u64_stats_update_begin(&rx_ring->syncp);
rx_ring->stats.packets += total_rx_packets;
rx_ring->stats.bytes += total_rx_bytes;
--
1.7.11.4
next prev parent reply other threads:[~2012-09-17 4:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-17 4:15 [net-next 0/8][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-09-17 4:15 ` [net-next 1/8] e1000: add byte queue limits Jeff Kirsher
2012-09-17 4:15 ` [net-next 2/8] ixgbe: Fix ordering of things so that PF correctly configures its VLANs Jeff Kirsher
2012-09-17 4:15 ` [net-next 3/8] ixgbe: Fix VF rate limiting to correctly account for more queues per VF Jeff Kirsher
2012-09-17 4:15 ` [net-next 4/8] ixgbe: fix reporting of spoofed packets Jeff Kirsher
2012-09-17 4:15 ` [net-next 5/8] ixgbe: add debugfs support Jeff Kirsher
2012-09-17 4:15 ` [net-next 6/8] ixgbe: added netdev_ops file to debugfs Jeff Kirsher
2012-09-17 4:15 ` [net-next 7/8] ixgbe: added reg_ops " Jeff Kirsher
2012-09-17 4:15 ` Jeff Kirsher [this message]
2012-09-17 4:56 ` [net-next 0/8][pull request] Intel Wired LAN Driver Updates David Miller
2012-09-17 8:15 ` Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347855342-6610-9-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=mark.d.rustad@intel.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).