[PATCH 1/20 V2] drivers/net/ethernet/dec/tulip/dmfe.c: fix error return code

[PATCH 1/20 V2] drivers/net/ethernet/dec/tulip/dmfe.c: fix error return code

[Peter Senna Tschudin]

From: Peter Senna Tschudin <peter.senna@gmail.com>

The function dmfe_init_one() return 0 for success and negative value
for most of its internal tests failures. There are three exceptions
that are error cases going to err_out_*:. Fore this three cases the
function abort its success execution path, but returns non negative 
value, making it dificult for a caller function to notice the error.

This patch fixes the error cases that do not return negative values.

This was found by Coccinelle, but the code change was made by hand.
This patch is not robot generated.

A simplified version of the semantic match that finds this problem is
as follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>

---
Changes from V1:
	Updated commit message. See:
	http://www.kernelhub.org/?p=2&msg=139319

 drivers/net/ethernet/dec/tulip/dmfe.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/dmfe.c b/drivers/net/ethernet/dec/tulip/dmfe.c
index 4d6fe60..d23755e 100644
--- a/drivers/net/ethernet/dec/tulip/dmfe.c
+++ b/drivers/net/ethernet/dec/tulip/dmfe.c
@@ -446,13 +446,17 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	/* Allocate Tx/Rx descriptor memory */
 	db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) *
 			DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
-	if (!db->desc_pool_ptr)
+	if (!db->desc_pool_ptr) {
+		err = -ENOMEM;
 		goto err_out_res;
+	}
 
 	db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC *
 			TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
-	if (!db->buf_pool_ptr)
+	if (!db->buf_pool_ptr) {
+		err = -ENOMEM;
 		goto err_out_free_desc;
+	}
 
 	db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
 	db->first_tx_desc_dma = db->desc_pool_dma_ptr;
@@ -462,8 +466,10 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,
 	db->chip_id = ent->driver_data;
 	/* IO type range. */
 	db->ioaddr = pci_iomap(pdev, 0, 0);
-	if (!db->ioaddr)
+	if (!db->ioaddr) {
+		err = -ENOMEM;
 		goto err_out_free_buf;
+	}
 
 	db->chip_revision = pdev->revision;
 	db->wol_mode = 0;

[PATCH 2/20 V2] drivers/net/ethernet/natsemi/natsemi.c: fix error return code

[Peter Senna Tschudin]

From: Peter Senna Tschudin <peter.senna@gmail.com>

The function natsemi_probe1() return 0 for success and negative value
for most of its internal tests failures. There is one exception
that is error case going to err_create_file:. Fore this error case the
function abort its success execution path, but returns non negative value, 
making it difficult for a caller function to notice the error.

This patch fixes the error case that do not return negative value.

This was found by Coccinelle, but the code change was made by hand.
This patch is not robot generated.

A simplified version of the semantic match that finds this problem is
as follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>

---
Changes from V1:
	Updated commit message. See:
	http://www.kernelhub.org/?p=2&msg=139319

 drivers/net/ethernet/natsemi/natsemi.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c
index 5b61d12..dbaaa99 100644
--- a/drivers/net/ethernet/natsemi/natsemi.c
+++ b/drivers/net/ethernet/natsemi/natsemi.c
@@ -947,8 +947,8 @@ static int __devinit natsemi_probe1 (struct pci_dev *pdev,
 	i = register_netdev(dev);
 	if (i)
 		goto err_register_netdev;
-
-	if (NATSEMI_CREATE_FILE(pdev, dspcfg_workaround))
+	i = NATSEMI_CREATE_FILE(pdev, dspcfg_workaround);
+	if (i)
 		goto err_create_file;
 
 	if (netif_msg_drv(np)) {

[PATCH 3/20 V2] drivers/net/can/sja1000/peak_pci.c: fix error return code

[Peter Senna Tschudin]

From: Peter Senna Tschudin <peter.senna@gmail.com>

The function peak_pci_probe() return 0 for success and negative value
for most of its internal tests failures. There are two exceptions
that are error cases going to failure_*:. Fore this two cases the
function abort its success execution path, but returns non negative
value, making it dificult for a caller function to notice the error.

This patch fixes the error cases that do not return negative values.

This was found by Coccinelle, but the code change was made by hand.
This patch is not robot generated.

A simplified version of the semantic match that finds this problem is
as follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>

---
Change from V1:
	Updated commit message. See: 
	http://www.kernelhub.org/?p=2&msg=139319

 drivers/net/can/sja1000/peak_pci.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index f0a1296..f5b82ae 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c
@@ -583,12 +583,14 @@ static int __devinit peak_pci_probe(struct pci_dev *pdev,
 	cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
 	if (!cfg_base) {
 		dev_err(&pdev->dev, "failed to map PCI resource #0\n");
+		err = -ENOMEM;
 		goto failure_release_regions;
 	}
 
 	reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
 	if (!reg_base) {
 		dev_err(&pdev->dev, "failed to map PCI resource #1\n");
+		err = -ENOMEM;
 		goto failure_unmap_cfg_base;
 	}
 

[PATCH 4/20 V2] drivers/net/can/sja1000/peak_pcmcia.c: fix error return code

[Peter Senna Tschudin]

From: Peter Senna Tschudin <peter.senna@gmail.com>

The function pcan_probe() return 0 for success and negative value
for most of its internal tests failures. There is one exception
that is error case going to probe_err_4:. Fore this error case, the
function abort its success execution path but returns non negative
value, making it difficult for a caller function to notice the error.

This patch fixes the error case that do not return negative value.

This was found by Coccinelle, but the code change was made by hand.
This patch is not robot generated.

A simplified version of the semantic match that finds this problem is
as follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>

---
Change from V1:
        Updated commit message. See:
        http://www.kernelhub.org/?p=2&msg=139319

 drivers/net/can/sja1000/peak_pcmcia.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c
index ec6bd9d..272a85f 100644
--- a/drivers/net/can/sja1000/peak_pcmcia.c
+++ b/drivers/net/can/sja1000/peak_pcmcia.c
@@ -686,8 +686,10 @@ static int __devinit pcan_probe(struct pcmcia_device *pdev)
 
 	/* detect available channels */
 	pcan_add_channels(card);
-	if (!card->chan_count)
+	if (!card->chan_count) {
+		err = -ENOMEM;
 		goto probe_err_4;
+	}
 
 	/* init the timer which controls the leds */
 	init_timer(&card->led_timer);

[PATCH 5/20 V2] drivers/net/ethernet/sis/sis900.c: fix error return code

[Peter Senna Tschudin]

From: Peter Senna Tschudin <peter.senna@gmail.com>

The function sis900_probe() return 0 for success and negative value
for most of its internal tests failures. There is one exception
that is error case going to err_out_cleardev:. Fore this error case,
the function abort its success execution path, but returns non negative
value, making it difficult for a caller function to notice the error.

This patch fixes the error case that do not return negative value.

This was found by Coccinelle, but the code change was made by hand.
This patch is not robot generated.

A simplified version of the semantic match that finds this problem is
as follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>

---
Change from V1:
        Updated commit message. See:
        http://www.kernelhub.org/?p=2&msg=139319

 drivers/net/ethernet/sis/sis900.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
index 203d9c6..fb9f6b3 100644
--- a/drivers/net/ethernet/sis/sis900.c
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -478,8 +478,10 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
 
 	/* IO region. */
 	ioaddr = pci_iomap(pci_dev, 0, 0);
-	if (!ioaddr)
+	if (!ioaddr) {
+		ret = -ENOMEM;
 		goto err_out_cleardev;
+	}
 
 	sis_priv = netdev_priv(net_dev);
 	sis_priv->ioaddr = ioaddr;

Re: [PATCH 3/20 V2] drivers/net/can/sja1000/peak_pci.c: fix error return code

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1437 bytes --]

On 10/05/2012 10:41 PM, Peter Senna Tschudin wrote:
> From: Peter Senna Tschudin <peter.senna@gmail.com>
> 
> The function peak_pci_probe() return 0 for success and negative value
> for most of its internal tests failures. There are two exceptions
> that are error cases going to failure_*:. Fore this two cases the
> function abort its success execution path, but returns non negative
> value, making it dificult for a caller function to notice the error.
> 
> This patch fixes the error cases that do not return negative values.
> 
> This was found by Coccinelle, but the code change was made by hand.
> This patch is not robot generated.
> 
> A simplified version of the semantic match that finds this problem is
> as follows: (http://coccinelle.lip6.fr/)
> 
> // <smpl>
> (
> if@p1 (\(ret < 0\|ret != 0\))
>  { ... return ret; }
> |
> ret@p1 = 0
> )
> ... when != ret = e1
>     when != &ret
> *if(...)
> {
>   ... when != ret = e2
>       when forall
>  return ret;
> }
> // </smpl>
> 
> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>

Too late, v1 of this patch is already in net/master

regards, Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]

Re: [PATCH 4/20 V2] drivers/net/can/sja1000/peak_pcmcia.c: fix error return code

[Marc Kleine-Budde]

[-- Attachment #1: Type: text/plain, Size: 1433 bytes --]

On 10/05/2012 10:41 PM, Peter Senna Tschudin wrote:
> From: Peter Senna Tschudin <peter.senna@gmail.com>
> 
> The function pcan_probe() return 0 for success and negative value
> for most of its internal tests failures. There is one exception
> that is error case going to probe_err_4:. Fore this error case, the
> function abort its success execution path but returns non negative
> value, making it difficult for a caller function to notice the error.
> 
> This patch fixes the error case that do not return negative value.
> 
> This was found by Coccinelle, but the code change was made by hand.
> This patch is not robot generated.
> 
> A simplified version of the semantic match that finds this problem is
> as follows: (http://coccinelle.lip6.fr/)
> 
> // <smpl>
> (
> if@p1 (\(ret < 0\|ret != 0\))
>  { ... return ret; }
> |
> ret@p1 = 0
> )
> ... when != ret = e1
>     when != &ret
> *if(...)
> {
>   ... when != ret = e2
>       when forall
>  return ret;
> }
> // </smpl>
> 
> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>


Too late, v1 of this patch is already in net/master

regards, Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 259 bytes --]

Re: [PATCH 2/20 V2] drivers/net/ethernet/natsemi/natsemi.c: fix error return code

[Francois Romieu]

Peter Senna Tschudin <peter.senna@gmail.com> :
[...]
> The function natsemi_probe1() return 0 for success and negative value
> for most of its internal tests failures. There is one exception
> that is error case going to err_create_file:. Fore this error case the
> function abort its success execution path, but returns non negative value, 
> making it difficult for a caller function to notice the error.

Ok. natsemi_probe1() forgets to return a negative status code in one of
its failure paths.

[...]
> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>

Acked-by: Francois Romieu <romieu@fr.zoreil.com>

-- 
Ueimor

Re: [PATCH 1/20 V2] drivers/net/ethernet/dec/tulip/dmfe.c: fix error return code

[David Miller]

Applied.

Re: [PATCH 2/20 V2] drivers/net/ethernet/natsemi/natsemi.c: fix error return code

[David Miller]

Applied.

Re: [PATCH 3/20 V2] drivers/net/can/sja1000/peak_pci.c: fix error return code

[David Miller]

This patch was already in the tree.

Re: [PATCH 4/20 V2] drivers/net/can/sja1000/peak_pcmcia.c: fix error return code

[David Miller]

This patch was already in the tree.

Re: [PATCH 5/20 V2] drivers/net/ethernet/sis/sis900.c: fix error return code

[David Miller]

Applied.