From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Alexander Duyck <alexander.h.duyck@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 03/13] ixgbe: Add support for GET_QUEUES message to get DCB configuration
Date: Fri, 19 Oct 2012 23:25:57 -0700 [thread overview]
Message-ID: <1350714367-24208-4-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1350714367-24208-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This patch addresses several issues in regards to the combination of DCB
and SR-IOV. Specifically it allows us to send information to the VF on
which queues it should be using.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h | 10 ++++++
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 42 ++++++++++++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
index d4c842e..42dd65e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h
@@ -71,6 +71,7 @@
enum ixgbe_pfvf_api_rev {
ixgbe_mbox_api_10, /* API version 1.0, linux/freebsd VF driver */
ixgbe_mbox_api_20, /* API version 2.0, solaris Phase1 VF driver */
+ ixgbe_mbox_api_11, /* API version 1.1, linux/freebsd VF driver */
/* This value should always be last */
ixgbe_mbox_api_unknown, /* indicates that API version is not known */
};
@@ -86,6 +87,15 @@ enum ixgbe_pfvf_api_rev {
#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
#define IXGBE_VF_API_NEGOTIATE 0x08 /* negotiate API version */
+/* mailbox API, version 1.1 VF requests */
+#define IXGBE_VF_GET_QUEUES 0x09 /* get queue configuration */
+
+/* GET_QUEUES return data indices within the mailbox */
+#define IXGBE_VF_TX_QUEUES 1 /* number of Tx queues supported */
+#define IXGBE_VF_RX_QUEUES 2 /* number of Rx queues supported */
+#define IXGBE_VF_TRANS_VLAN 3 /* Indication of port vlan */
+#define IXGBE_VF_DEF_QUEUE 4 /* Default queue offset */
+
/* length of permanent address message returned from PF */
#define IXGBE_VF_PERMADDR_MSG_LEN 4
/* word in permanent address message with the current multicast type */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index b330a1c..8bf467b 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -751,6 +751,45 @@ static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
return -1;
}
+static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter,
+ u32 *msgbuf, u32 vf)
+{
+ struct net_device *dev = adapter->netdev;
+ struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ];
+ unsigned int default_tc = 0;
+ u8 num_tcs = netdev_get_num_tc(dev);
+
+ /* verify the PF is supporting the correct APIs */
+ switch (adapter->vfinfo[vf].vf_api) {
+ case ixgbe_mbox_api_20:
+ case ixgbe_mbox_api_11:
+ break;
+ default:
+ return -1;
+ }
+
+ /* only allow 1 Tx queue for bandwidth limiting */
+ msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
+ msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask);
+
+ /* if TCs > 1 determine which TC belongs to default user priority */
+ if (num_tcs > 1)
+ default_tc = netdev_get_prio_tc_map(dev, adapter->default_up);
+
+ /* notify VF of need for VLAN tag stripping, and correct queue */
+ if (num_tcs)
+ msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs;
+ else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos)
+ msgbuf[IXGBE_VF_TRANS_VLAN] = 1;
+ else
+ msgbuf[IXGBE_VF_TRANS_VLAN] = 0;
+
+ /* notify VF of default queue */
+ msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc;
+
+ return 0;
+}
+
static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
{
u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
@@ -804,6 +843,9 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
case IXGBE_VF_API_NEGOTIATE:
retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
break;
+ case IXGBE_VF_GET_QUEUES:
+ retval = ixgbe_get_vf_queues(adapter, msgbuf, vf);
+ break;
default:
e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
retval = IXGBE_ERR_MBX;
--
1.7.11.7
next prev parent reply other threads:[~2012-10-20 6:26 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-20 6:25 [net-next 00/13][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-10-20 6:25 ` [net-next 01/13] ixgbe: Add support for IPv6 and UDP to ixgbe_get_headlen Jeff Kirsher
2012-10-20 8:01 ` Eric Dumazet
2012-10-20 20:39 ` Alexander Duyck
2012-10-20 6:25 ` [net-next 02/13] ixgbe: Add support for tracking the default user priority to SR-IOV Jeff Kirsher
2012-10-20 6:25 ` Jeff Kirsher [this message]
2012-10-20 6:25 ` [net-next 04/13] ixgbe: Enable support for VF API version 1.1 in the PF Jeff Kirsher
2012-10-20 6:25 ` [net-next 05/13] ixgbevf: Add VF DCB + SR-IOV support Jeff Kirsher
2012-10-20 6:26 ` [net-next 06/13] ixgbe: add WOL support for new subdevice id Jeff Kirsher
2012-10-20 6:26 ` [net-next 07/13] ixgbe: (PTP) refactor init, cyclecounter and reset Jeff Kirsher
2012-10-20 6:26 ` [net-next 08/13] ixgbe: using is_zero_ether_addr() to simplify the code Jeff Kirsher
2012-10-20 6:26 ` [net-next 09/13] ixgbe: Correcting small packet padding Jeff Kirsher
2012-10-20 6:26 ` [net-next 10/13] ixgbe: Drop unnecessary addition from ixgbe_set_rx_buffer_len Jeff Kirsher
2012-10-20 6:26 ` [net-next 11/13] ixgbe: Add function ixgbe_reset_pipeline_82599 Jeff Kirsher
2012-10-20 6:26 ` [net-next 12/13] ixgbe: Add support for pipeline reset Jeff Kirsher
2012-10-21 12:06 ` Martin Josefsson
2012-10-22 20:45 ` Skidmore, Donald C
2012-10-20 6:26 ` [net-next 13/13] ixgbe: Fix possible memory leak in ixgbe_set_ringparam Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350714367-24208-4-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).