From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Alexander Duyck <alexander.h.duyck@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 01/12] ixgbe: Add support for IPv6 and UDP to ixgbe_get_headlen
Date: Mon, 22 Oct 2012 21:26:14 -0700 [thread overview]
Message-ID: <1350966385-19020-2-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1350966385-19020-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This change adds support for IPv6 and UDP to ixgbe_get_headlen. The
advantage to this is that we can now handle ipv4/UDP, ipv6/TCP, and
ipv6/UDP with a single memcpy instead of having to do them in multiple
pskb_may_pull calls.
A quick bit of testing shows that we increase throughput for a single
session of netperf from 8800Mpbs to about 9300Mpbs in the case of ipv6/TCP.
As such overall ipv6 performance should improve with this change.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index e2a6691..3ef74f8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1244,6 +1244,7 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
struct vlan_hdr *vlan;
/* l3 headers */
struct iphdr *ipv4;
+ struct ipv6hdr *ipv6;
} hdr;
__be16 protocol;
u8 nexthdr = 0; /* default to not TCP */
@@ -1284,6 +1285,13 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
/* record next protocol */
nexthdr = hdr.ipv4->protocol;
hdr.network += hlen;
+ } else if (protocol == __constant_htons(ETH_P_IPV6)) {
+ if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr)))
+ return max_len;
+
+ /* record next protocol */
+ nexthdr = hdr.ipv6->nexthdr;
+ hdr.network += sizeof(struct ipv6hdr);
#ifdef IXGBE_FCOE
} else if (protocol == __constant_htons(ETH_P_FCOE)) {
if ((hdr.network - data) > (max_len - FCOE_HEADER_LEN))
@@ -1294,7 +1302,7 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
return hdr.network - data;
}
- /* finally sort out TCP */
+ /* finally sort out TCP/UDP */
if (nexthdr == IPPROTO_TCP) {
if ((hdr.network - data) > (max_len - sizeof(struct tcphdr)))
return max_len;
@@ -1307,6 +1315,11 @@ static unsigned int ixgbe_get_headlen(unsigned char *data,
return hdr.network - data;
hdr.network += hlen;
+ } else if (nexthdr == IPPROTO_UDP) {
+ if ((hdr.network - data) > (max_len - sizeof(struct udphdr)))
+ return max_len;
+
+ hdr.network += sizeof(struct udphdr);
}
/*
--
1.7.11.7
next prev parent reply other threads:[~2012-10-23 4:36 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-23 4:26 [net-next 00/12][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-10-23 4:26 ` Jeff Kirsher [this message]
2012-10-23 4:26 ` [net-next 02/12] ixgbe: Add support for tracking the default user priority to SR-IOV Jeff Kirsher
2012-10-23 4:26 ` [net-next 03/12] ixgbe: Add support for GET_QUEUES message to get DCB configuration Jeff Kirsher
2012-10-23 4:26 ` [net-next 04/12] ixgbe: Enable support for VF API version 1.1 in the PF Jeff Kirsher
2012-10-23 4:26 ` [net-next 05/12] ixgbevf: Add VF DCB + SR-IOV support Jeff Kirsher
2012-10-23 4:26 ` [net-next 06/12] ixgbe: add WOL support for new subdevice id Jeff Kirsher
2012-10-23 4:26 ` [net-next 07/12] ixgbe: (PTP) refactor init, cyclecounter and reset Jeff Kirsher
2012-10-23 4:26 ` [net-next 08/12] ixgbe: using is_zero_ether_addr() to simplify the code Jeff Kirsher
2012-10-23 4:45 ` Joe Perches
2012-10-23 5:17 ` Jeff Kirsher
2012-10-23 19:35 ` Joe Perches
2012-10-23 4:26 ` [net-next 09/12] ixgbe: Correcting small packet padding Jeff Kirsher
2012-10-23 4:26 ` [net-next 10/12] ixgbe: Drop unnecessary addition from ixgbe_set_rx_buffer_len Jeff Kirsher
2012-10-23 4:26 ` [net-next 11/12] ixgbe: Add function ixgbe_reset_pipeline_82599 Jeff Kirsher
2012-10-23 4:26 ` [net-next 12/12] ixgbe: Fix possible memory leak in ixgbe_set_ringparam Jeff Kirsher
2012-10-23 6:51 ` [net-next 00/12][pull request] Intel Wired LAN Driver Updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350966385-19020-2-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).