netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: John Fastabend <john.r.fastabend@intel.com>,
	netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 03/14] net, ixgbe: handle link local multicast addresses in SR-IOV mode
Date: Fri, 26 Oct 2012 04:58:11 -0700	[thread overview]
Message-ID: <1351252702-16532-4-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1351252702-16532-1-git-send-email-jeffrey.t.kirsher@intel.com>

From: John Fastabend <john.r.fastabend@intel.com>

In SR-IOV mode the PF driver acts as the uplink port and is
used to send control packets e.g. lldpad, stp, etc.

   eth0.1     eth0.2     eth0
   VF         VF         PF
   |          |          |   <-- stand-in for uplink
   |          |          |
  --------------------------
  |  Embedded Switch       |
  --------------------------
              |
             MAC   <-- uplink

But the embedded switch is setup to forward multicast addresses
to all interfaces both VFs and PF and onto the physical link.
This results in reserved MAC addresses used by control protocols
to be forwarded over the switch onto the VF.

In the LLDP case the PF sends an LLDPDU and it is currently
being forwarded to all the VFs who then see the PF as a peer.
This is incorrect.

This patch adds the multicast addresses to the RAR table in the
hardware to prevent this behavior.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c |  2 +-
 drivers/net/ethernet/intel/ixgbevf/vf.c       |  3 +++
 include/linux/etherdevice.h                   | 19 +++++++++++++++++++
 net/bridge/br_device.c                        |  2 +-
 net/bridge/br_input.c                         | 15 ---------------
 net/bridge/br_private.h                       |  1 -
 net/bridge/br_sysfs_br.c                      |  3 ++-
 7 files changed, 26 insertions(+), 19 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 88d636a..97bab45 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6967,7 +6967,7 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 		return -EINVAL;
 	}
 
-	if (is_unicast_ether_addr(addr)) {
+	if (is_unicast_ether_addr(addr) || is_link_local(addr)) {
 		u32 rar_uc_entries = IXGBE_MAX_PF_MACVLANS;
 
 		if (netdev_uc_count(dev) < rar_uc_entries)
diff --git a/drivers/net/ethernet/intel/ixgbevf/vf.c b/drivers/net/ethernet/intel/ixgbevf/vf.c
index 5fa397b..c0fd1ef 100644
--- a/drivers/net/ethernet/intel/ixgbevf/vf.c
+++ b/drivers/net/ethernet/intel/ixgbevf/vf.c
@@ -331,6 +331,9 @@ static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
 	netdev_for_each_mc_addr(ha, netdev) {
 		if (i == cnt)
 			break;
+		if (is_link_local(ha->addr))
+			continue;
+
 		vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
 	}
 
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index b006ba0..45ded4b 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -51,6 +51,25 @@ extern struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs,
 #define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1)
 #define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count)
 
+/* Reserved Ethernet Addresses per IEEE 802.1Q */
+static const u8 br_reserved_address[ETH_ALEN] = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 };
+
+/**
+ * is_link_local -  Determine if given Eth addr is a link local mcast address.
+ * @addr: Pointer to a six-byte array containing the Ethernet address
+ *
+ * Return true if address is link local reserved addr (01:80:c2:00:00:0X) per
+ * IEEE 802.1Q 8.6.3 Frame filtering.
+ */
+static inline int is_link_local(const unsigned char *dest)
+{
+	__be16 *a = (__be16 *)dest;
+	static const __be16 *b = (const __be16 *)br_reserved_address;
+	static const __be16 m = cpu_to_be16(0xfff0);
+
+	return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | ((a[2] ^ b[2]) & m)) == 0;
+}
+
 /**
  * is_zero_ether_addr - Determine if give Ethernet address is all zeros.
  * @addr: Pointer to a six-byte array containing the Ethernet address
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 070e8a6..d41b6f9 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -356,7 +356,7 @@ void br_dev_setup(struct net_device *dev)
 	br->bridge_id.prio[0] = 0x80;
 	br->bridge_id.prio[1] = 0x00;
 
-	memcpy(br->group_addr, br_group_address, ETH_ALEN);
+	memcpy(br->group_addr, br_reserved_address, ETH_ALEN);
 
 	br->stp_enabled = BR_NO_STP;
 	br->group_fwd_mask = BR_GROUPFWD_DEFAULT;
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 76f15fd..d047978 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -19,9 +19,6 @@
 #include <linux/export.h>
 #include "br_private.h"
 
-/* Bridge group multicast address 802.1d (pg 51). */
-const u8 br_group_address[ETH_ALEN] = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 };
-
 /* Hook for brouter */
 br_should_route_hook_t __rcu *br_should_route_hook __read_mostly;
 EXPORT_SYMBOL(br_should_route_hook);
@@ -127,18 +124,6 @@ static int br_handle_local_finish(struct sk_buff *skb)
 	return 0;	 /* process further */
 }
 
-/* Does address match the link local multicast address.
- * 01:80:c2:00:00:0X
- */
-static inline int is_link_local(const unsigned char *dest)
-{
-	__be16 *a = (__be16 *)dest;
-	static const __be16 *b = (const __be16 *)br_group_address;
-	static const __be16 m = cpu_to_be16(0xfff0);
-
-	return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | ((a[2] ^ b[2]) & m)) == 0;
-}
-
 /*
  * Return NULL if skb is handled
  * note: already called with rcu_read_lock
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 9b278c4..65b191a 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -288,7 +288,6 @@ struct br_input_skb_cb {
 	pr_debug("%s: " format,  (br)->dev->name, ##args)
 
 extern struct notifier_block br_device_notifier;
-extern const u8 br_group_address[ETH_ALEN];
 
 /* called under bridge lock */
 static inline int br_is_root_bridge(const struct net_bridge *br)
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index c5c0593..e157b0d 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -14,6 +14,7 @@
 #include <linux/capability.h>
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
+#include <linux/etherdevice.h>
 #include <linux/if_bridge.h>
 #include <linux/rtnetlink.h>
 #include <linux/spinlock.h>
@@ -310,7 +311,7 @@ static ssize_t store_group_addr(struct device *d,
 
 	/* Must be 01:80:c2:00:00:0X */
 	for (i = 0; i < 5; i++)
-		if (new_addr[i] != br_group_address[i])
+		if (new_addr[i] != br_reserved_address[i])
 			return -EINVAL;
 
 	if (new_addr[5] & ~0xf)
-- 
1.7.11.7

  parent reply	other threads:[~2012-10-26 11:58 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-26 11:58 [net-next 00/14][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2012-10-26 11:58 ` [net-next 01/14] ixgbe: Add support for pipeline reset Jeff Kirsher
2012-10-26 11:58 ` [net-next 02/14] ixgbe: Fix return value from macvlan filter function Jeff Kirsher
2012-10-26 11:58 ` Jeff Kirsher [this message]
2012-10-26 11:58 ` [net-next 04/14] ixgbe: clean up the condition for turning on/off the laser Jeff Kirsher
2012-10-26 11:58 ` [net-next 05/14] ixgbe: Return success or failure on VF MAC filter set Jeff Kirsher
2012-10-26 11:58 ` [net-next 06/14] ixgbe: Do not decrement budget in ixgbe_clean_rx_irq Jeff Kirsher
2012-10-26 11:58 ` [net-next 07/14] ixgbe: eliminate Smatch warnings in ixgbe_debugfs.c Jeff Kirsher
2012-10-26 12:41   ` Dan Carpenter
2012-10-26 11:58 ` [net-next 08/14] ixgbe: add/udpate descriptor maps in comments Jeff Kirsher
2012-10-26 11:58 ` [net-next 09/14] ixgbevf: Do not forward LLDP type frames Jeff Kirsher
2012-10-26 11:58 ` [net-next 10/14] ixgbevf: make sure probe fails on MSI-X enable error Jeff Kirsher
2012-10-26 12:43   ` Kicinski, Jakub
2012-10-26 16:32     ` Greg Rose
2012-10-26 11:58 ` [net-next 11/14] igbvf: Check for error on dma_map_single call Jeff Kirsher
2012-10-26 11:58 ` [net-next 12/14] igb: Enable auto-crossover during forced operation on 82580 and above Jeff Kirsher
2012-10-26 11:58 ` [net-next 13/14] igb: Update firmware version info for ethtool output Jeff Kirsher
2012-10-26 11:58 ` [net-next 14/14] igb: Fix sparse warning in igb_ptp_rx_pktstamp Jeff Kirsher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351252702-16532-4-git-send-email-jeffrey.t.kirsher@intel.com \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=john.r.fastabend@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=sassmann@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).