netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vaibhav Hiremath <hvaibhav@ti.com>
To: <netdev@vger.kernel.org>
Cc: <paul@pwsan.com>, <linux-arm-kernel@lists.infradead.org>,
	<linux-omap@vger.kernel.org>, Mugunthan V N <mugunthanvnm@ti.com>,
	Vaibhav Hiremath <hvaibhav@ti.com>,
	Richard Cochran <richardcochran@gmail.com>,
	Benoit Cousson <b-cousson@ti.com>
Subject: [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX
Date: Mon, 29 Oct 2012 13:51:21 +0530	[thread overview]
Message-ID: <1351498881-32482-6-git-send-email-hvaibhav@ti.com> (raw)
In-Reply-To: <1351498881-32482-1-git-send-email-hvaibhav@ti.com>

From: Mugunthan V N <mugunthanvnm@ti.com>

Add CPSW and MDIO related device tree data for AM33XX.
Also enable them into board/evm dts files by providing
respective phy-id.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/boot/dts/am335x-bone.dts |    8 ++++++
 arch/arm/boot/dts/am335x-evm.dts  |    8 ++++++
 arch/arm/boot/dts/am33xx.dtsi     |   50 +++++++++++++++++++++++++++++++++++++
 3 files changed, 66 insertions(+), 0 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87..e233cfa 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -78,3 +78,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d632..415c3b3 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -118,3 +118,11 @@
 		};
 	};
 };
+
+&cpsw_emac0 {
+	phy_id = "4a101000.mdio:00";
+};
+
+&cpsw_emac1 {
+	phy_id = "4a101000.mdio:01";
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff..f6bea04 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -210,5 +210,55 @@
 			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		mac: ethernet@4A100000 {
+			compatible = "ti,cpsw";
+			ti,hwmods = "cpgmac0";
+			cpdma_channels = <8>;
+			host_port_no = <0>;
+			cpdma_reg_ofs = <0x800>;
+			cpdma_sram_ofs = <0xa00>;
+			ale_reg_ofs = <0xd00>;
+			ale_entries = <1024>;
+			host_port_reg_ofs = <0x108>;
+			hw_stats_reg_ofs = <0x900>;
+			bd_ram_ofs = <0x2000>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			reg = <0x4a100000 0x800
+				0x4a101200 0x100
+				0x4a101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&intc>;
+			/* c0_rx_thresh_pend c0_rx_pend c0_tx_pend c0_misc_pend*/
+			interrupts = <40 41 42 43>;
+			ranges;
+			cpsw_emac0: slave@0 {
+				slave_reg_ofs = <0x208>;
+				sliver_reg_ofs = <0xd80>;
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+			cpsw_emac1: slave@1 {
+				slave_reg_ofs = <0x308>;
+				sliver_reg_ofs = <0xdc0>;
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				reg = <0x4a101000 0x100>;
+			};
+
+		};
 	};
 };
--
1.7.0.4

  parent reply	other threads:[~2012-10-29  8:21 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-29  8:21 # (c) 2007, Joe Perches <joe@perches.com> Vaibhav Hiremath
2012-10-29  8:21 ` [PATCH-V2 0/4] ARM: AM33XX: net: Add DT support to CPGMAC and MDIO driver Vaibhav Hiremath
2012-10-29  8:33   ` Richard Cochran
2012-10-29  8:21 ` [PATCH 1/4] net: davinci_mdio: Fix typo mistake in calling runtime-pm api Vaibhav Hiremath
2012-10-30 21:33   ` Peter Korsgaard
2012-10-29  8:21 ` [PATCH 2/4] net: cpsw: Add parent<->child relation support between cpsw and mdio Vaibhav Hiremath
2012-10-30 21:34   ` Peter Korsgaard
2012-10-29  8:21 ` [PATCH 3/4] ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module Vaibhav Hiremath
2012-10-30 21:35   ` Peter Korsgaard
2012-10-29  8:21 ` Vaibhav Hiremath [this message]
2012-10-30 21:35   ` [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX Peter Korsgaard
2012-10-31 15:17   ` Benoit Cousson
2012-10-31 19:52     ` Hiremath, Vaibhav
2012-11-01  7:45     ` Richard Cochran
2012-11-01  9:28       ` Cousson, Benoit
2012-11-03 17:45         ` [PATCH RFC net-next 0/1] Simplify the CPSW DT Richard Cochran
2012-11-03 17:45           ` [PATCH RFC net-next 1/1] cpsw: simplify the setup of the register pointers Richard Cochran
2012-11-02  8:46     ` [PATCH 4/4] arm/dts: am33xx: Add CPSW and MDIO module nodes for AM33XX N, Mugunthan V
2012-11-02  8:56       ` Richard Cochran
2012-11-02 10:42         ` N, Mugunthan V
2012-11-02 15:19           ` Richard Cochran
2012-11-08 12:59     ` Mugunthan V N
2012-10-29  9:25 ` # (c) 2007, Joe Perches <joe@perches.com> Vaibhav Hiremath

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351498881-32482-6-git-send-email-hvaibhav@ti.com \
    --to=hvaibhav@ti.com \
    --cc=b-cousson@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=paul@pwsan.com \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).