From: Vlad Yasevich <vyasevic@redhat.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, eric.dumazet@gmail.com
Subject: [PATCH V2 11/14] ipv6: Update ipv6 static library with newly needed functions
Date: Thu, 15 Nov 2012 13:49:20 -0500 [thread overview]
Message-ID: <1353005363-6974-12-git-send-email-vyasevic@redhat.com> (raw)
In-Reply-To: <1353005363-6974-1-git-send-email-vyasevic@redhat.com>
UDP offload needs some additional functions to be in the static kernel
for it work correclty. Move those functions into the core.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
---
net/ipv6/Makefile | 2 +-
net/ipv6/exthdrs.c | 44 ---------------------------
net/ipv6/exthdrs_core.c | 44 +++++++++++++++++++++++++++
net/ipv6/ip6_output.c | 65 ----------------------------------------
net/ipv6/output_core.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 121 insertions(+), 110 deletions(-)
create mode 100644 net/ipv6/output_core.c
diff --git a/net/ipv6/Makefile b/net/ipv6/Makefile
index 7f25077..cdca302 100644
--- a/net/ipv6/Makefile
+++ b/net/ipv6/Makefile
@@ -41,6 +41,6 @@ obj-$(CONFIG_IPV6_SIT) += sit.o
obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o
obj-$(CONFIG_IPV6_GRE) += ip6_gre.o
-obj-y += addrconf_core.o exthdrs_core.o
+obj-y += addrconf_core.o exthdrs_core.o output_core.o
obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index dc0faab..e9b5b33 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -50,50 +50,6 @@
#include <asm/uaccess.h>
#include "ip6_offload.h"
-int ipv6_find_tlv(struct sk_buff *skb, int offset, int type)
-{
- const unsigned char *nh = skb_network_header(skb);
- int packet_len = skb->tail - skb->network_header;
- struct ipv6_opt_hdr *hdr;
- int len;
-
- if (offset + 2 > packet_len)
- goto bad;
- hdr = (struct ipv6_opt_hdr *)(nh + offset);
- len = ((hdr->hdrlen + 1) << 3);
-
- if (offset + len > packet_len)
- goto bad;
-
- offset += 2;
- len -= 2;
-
- while (len > 0) {
- int opttype = nh[offset];
- int optlen;
-
- if (opttype == type)
- return offset;
-
- switch (opttype) {
- case IPV6_TLV_PAD1:
- optlen = 1;
- break;
- default:
- optlen = nh[offset + 1] + 2;
- if (optlen > len)
- goto bad;
- break;
- }
- offset += optlen;
- len -= optlen;
- }
- /* not_found */
- bad:
- return -1;
-}
-EXPORT_SYMBOL_GPL(ipv6_find_tlv);
-
/*
* Parsing tlv encoded headers.
*
diff --git a/net/ipv6/exthdrs_core.c b/net/ipv6/exthdrs_core.c
index f73d59a..e7d756e 100644
--- a/net/ipv6/exthdrs_core.c
+++ b/net/ipv6/exthdrs_core.c
@@ -111,3 +111,47 @@ int ipv6_skip_exthdr(const struct sk_buff *skb, int start, u8 *nexthdrp,
return start;
}
EXPORT_SYMBOL(ipv6_skip_exthdr);
+
+int ipv6_find_tlv(struct sk_buff *skb, int offset, int type)
+{
+ const unsigned char *nh = skb_network_header(skb);
+ int packet_len = skb->tail - skb->network_header;
+ struct ipv6_opt_hdr *hdr;
+ int len;
+
+ if (offset + 2 > packet_len)
+ goto bad;
+ hdr = (struct ipv6_opt_hdr *)(nh + offset);
+ len = ((hdr->hdrlen + 1) << 3);
+
+ if (offset + len > packet_len)
+ goto bad;
+
+ offset += 2;
+ len -= 2;
+
+ while (len > 0) {
+ int opttype = nh[offset];
+ int optlen;
+
+ if (opttype == type)
+ return offset;
+
+ switch (opttype) {
+ case IPV6_TLV_PAD1:
+ optlen = 1;
+ break;
+ default:
+ optlen = nh[offset + 1] + 2;
+ if (optlen > len)
+ goto bad;
+ break;
+ }
+ offset += optlen;
+ len -= optlen;
+ }
+ /* not_found */
+ bad:
+ return -1;
+}
+EXPORT_SYMBOL_GPL(ipv6_find_tlv);
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index aece3e7..45e6558 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -545,71 +545,6 @@ static void ip6_copy_metadata(struct sk_buff *to, struct sk_buff *from)
skb_copy_secmark(to, from);
}
-int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
-{
- u16 offset = sizeof(struct ipv6hdr);
- struct ipv6_opt_hdr *exthdr =
- (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
- unsigned int packet_len = skb->tail - skb->network_header;
- int found_rhdr = 0;
- *nexthdr = &ipv6_hdr(skb)->nexthdr;
-
- while (offset + 1 <= packet_len) {
-
- switch (**nexthdr) {
-
- case NEXTHDR_HOP:
- break;
- case NEXTHDR_ROUTING:
- found_rhdr = 1;
- break;
- case NEXTHDR_DEST:
-#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
- if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0)
- break;
-#endif
- if (found_rhdr)
- return offset;
- break;
- default :
- return offset;
- }
-
- offset += ipv6_optlen(exthdr);
- *nexthdr = &exthdr->nexthdr;
- exthdr = (struct ipv6_opt_hdr *)(skb_network_header(skb) +
- offset);
- }
-
- return offset;
-}
-
-void ipv6_select_ident(struct frag_hdr *fhdr, struct rt6_info *rt)
-{
- static atomic_t ipv6_fragmentation_id;
- int old, new;
-
- if (rt && !(rt->dst.flags & DST_NOPEER)) {
- struct inet_peer *peer;
- struct net *net;
-
- net = dev_net(rt->dst.dev);
- peer = inet_getpeer_v6(net->ipv6.peers, &rt->rt6i_dst.addr, 1);
- if (peer) {
- fhdr->identification = htonl(inet_getid(peer, 0));
- inet_putpeer(peer);
- return;
- }
- }
- do {
- old = atomic_read(&ipv6_fragmentation_id);
- new = old + 1;
- if (!new)
- new = 1;
- } while (atomic_cmpxchg(&ipv6_fragmentation_id, old, new) != old);
- fhdr->identification = htonl(new);
-}
-
int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
{
struct sk_buff *frag;
diff --git a/net/ipv6/output_core.c b/net/ipv6/output_core.c
new file mode 100644
index 0000000..c2e73e6
--- /dev/null
+++ b/net/ipv6/output_core.c
@@ -0,0 +1,76 @@
+/*
+ * IPv6 library code, needed by static components when full IPv6 support is
+ * not configured or static. These functions are needed by GSO/GRO implementation.
+ */
+#include <linux/export.h>
+#include <net/ipv6.h>
+#include <net/ip6_fib.h>
+
+void ipv6_select_ident(struct frag_hdr *fhdr, struct rt6_info *rt)
+{
+ static atomic_t ipv6_fragmentation_id;
+ int old, new;
+
+#if IS_ENABLED(CONFIG_IPV6)
+ if (rt && !(rt->dst.flags & DST_NOPEER)) {
+ struct inet_peer *peer;
+ struct net *net;
+
+ net = dev_net(rt->dst.dev);
+ peer = inet_getpeer_v6(net->ipv6.peers, &rt->rt6i_dst.addr, 1);
+ if (peer) {
+ fhdr->identification = htonl(inet_getid(peer, 0));
+ inet_putpeer(peer);
+ return;
+ }
+ }
+#endif
+ do {
+ old = atomic_read(&ipv6_fragmentation_id);
+ new = old + 1;
+ if (!new)
+ new = 1;
+ } while (atomic_cmpxchg(&ipv6_fragmentation_id, old, new) != old);
+ fhdr->identification = htonl(new);
+}
+EXPORT_SYMBOL(ipv6_select_ident);
+
+int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
+{
+ u16 offset = sizeof(struct ipv6hdr);
+ struct ipv6_opt_hdr *exthdr =
+ (struct ipv6_opt_hdr *)(ipv6_hdr(skb) + 1);
+ unsigned int packet_len = skb->tail - skb->network_header;
+ int found_rhdr = 0;
+ *nexthdr = &ipv6_hdr(skb)->nexthdr;
+
+ while (offset + 1 <= packet_len) {
+
+ switch (**nexthdr) {
+
+ case NEXTHDR_HOP:
+ break;
+ case NEXTHDR_ROUTING:
+ found_rhdr = 1;
+ break;
+ case NEXTHDR_DEST:
+#if IS_ENABLED(CONFIG_IPV6_MIP6)
+ if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0)
+ break;
+#endif
+ if (found_rhdr)
+ return offset;
+ break;
+ default :
+ return offset;
+ }
+
+ offset += ipv6_optlen(exthdr);
+ *nexthdr = &exthdr->nexthdr;
+ exthdr = (struct ipv6_opt_hdr *)(skb_network_header(skb) +
+ offset);
+ }
+
+ return offset;
+}
+EXPORT_SYMBOL(ip6_find_1stfragopt);
--
1.7.7.6
next prev parent reply other threads:[~2012-11-15 18:49 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-15 18:49 [PATCH V2 00/14] Always build GSO/GRO functionality into the kernel Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 01/14] net: Add generic packet offload infrastructure Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 02/14] net: Switch to using the new packet offload infrustructure Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 03/14] net: Add net protocol offload registration infrustructure Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 04/14] ipv6: Add new offload registration infrastructure Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 05/14] ipv4: Switch to using the new offload infrastructure Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 06/14] ipv6: Switch to using " Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 07/14] ipv6: Separate ipv6 offload support Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 08/14] ipv6: Separate tcp offload functionality Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 09/14] ipv6: Separate out UDP " Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 10/14] ipv6: Move exthdr offload support into separate file Vlad Yasevich
2012-11-15 18:49 ` Vlad Yasevich [this message]
2012-11-15 18:49 ` [PATCH V2 12/14] ipv4: Pull GSO registration out of inet_init() Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 13/14] ipv6: Pull IPv6 GSO registration out of the module Vlad Yasevich
2012-11-15 18:49 ` [PATCH V2 14/14] net: Remove code duplication between offload structures Vlad Yasevich
2012-11-15 22:42 ` [PATCH V2 00/14] Always build GSO/GRO functionality into the kernel David Miller
2012-11-15 22:48 ` Vlad Yasevich
2012-11-15 22:53 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353005363-6974-12-git-send-email-vyasevic@redhat.com \
--to=vyasevic@redhat.com \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).