From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Paul Gortmaker <paul.gortmaker@windriver.com>
Subject: [PATCH net-next 12/15] drivers/net: delete the really obsolete 8390 based 10Mbit ISA drivers
Date: Mon, 21 Jan 2013 20:46:19 -0500 [thread overview]
Message-ID: <1358819182-28032-13-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1358819182-28032-1-git-send-email-paul.gortmaker@windriver.com>
This is an area I know all too well, after being author of several 8390
drivers, and maintainer of all 8390 drivers during a large part of their
active lifecycle.
To that end, I can say this with a reasonable degree of confidence.
The drivers deleted here represent the earliest (as in early 1990)
hardware and/or rare hardware. The remaining hardware not deleted
here is the more modern/sane of the lot, with ISA-PnP and jumperless
"soft configuration" like the wd and smc cards had.
The original ne2000 driver (ne.c) gets a pass at this time since
AT/LANTIC based cards that could be both ne2000 or wd-like (with
shared memory) and with jumperless configuration were made in the
mid to late 1990's, and performed reasonably well for their era.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/net/Space.c | 16 -
drivers/net/ethernet/8390/3c503.c | 778 ------------------------------------
drivers/net/ethernet/8390/3c503.h | 91 -----
drivers/net/ethernet/8390/Kconfig | 48 ---
drivers/net/ethernet/8390/Makefile | 4 -
drivers/net/ethernet/8390/e2100.c | 489 ----------------------
drivers/net/ethernet/8390/hp-plus.c | 505 -----------------------
drivers/net/ethernet/8390/hp.c | 438 --------------------
8 files changed, 2369 deletions(-)
delete mode 100644 drivers/net/ethernet/8390/3c503.c
delete mode 100644 drivers/net/ethernet/8390/3c503.h
delete mode 100644 drivers/net/ethernet/8390/e2100.c
delete mode 100644 drivers/net/ethernet/8390/hp-plus.c
delete mode 100644 drivers/net/ethernet/8390/hp.c
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 15de20b..393b017 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -40,14 +40,10 @@
extern struct net_device *hp100_probe(int unit);
extern struct net_device *ultra_probe(int unit);
extern struct net_device *wd_probe(int unit);
-extern struct net_device *el2_probe(int unit);
extern struct net_device *ne_probe(int unit);
-extern struct net_device *hp_probe(int unit);
-extern struct net_device *hp_plus_probe(int unit);
extern struct net_device *fmv18x_probe(int unit);
extern struct net_device *i82596_probe(int unit);
extern struct net_device *ewrk3_probe(int unit);
-extern struct net_device *e2100_probe(int unit);
extern struct net_device *ni65_probe(int unit);
extern struct net_device *sonic_probe(int unit);
extern struct net_device *seeq8005_probe(int unit);
@@ -108,18 +104,6 @@ static struct devprobe2 isa_probes[] __initdata = {
#ifdef CONFIG_WD80x3
{wd_probe, 0},
#endif
-#ifdef CONFIG_EL2 /* 3c503 */
- {el2_probe, 0},
-#endif
-#ifdef CONFIG_HPLAN
- {hp_probe, 0},
-#endif
-#ifdef CONFIG_HPLAN_PLUS
- {hp_plus_probe, 0},
-#endif
-#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
- {e2100_probe, 0},
-#endif
#if defined(CONFIG_NE2000) || \
defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
{ne_probe, 0},
diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c
deleted file mode 100644
index 0e9afe7..0000000
diff --git a/drivers/net/ethernet/8390/3c503.h b/drivers/net/ethernet/8390/3c503.h
deleted file mode 100644
index e2367b8..0000000
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index e49a442..1b78ca7 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -21,18 +21,6 @@ config NET_VENDOR_8390
if NET_VENDOR_8390
-config EL2
- tristate "3c503 \"EtherLink II\" support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c503.
-
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
depends on PCMCIA
@@ -62,42 +50,6 @@ config AX88796_93CX6
---help---
Select this if your platform comes with an external 93CX6 eeprom.
-config E2100
- tristate "Cabletron E21xx support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called e2100.
-
-config HPLAN_PLUS
- tristate "HP PCLAN+ (27247B and 27252A) support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp-plus.
-
-config HPLAN
- tristate "HP PCLAN (27245 and other 27xxx series) support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp.
-
config HYDRA
tristate "Hydra support"
depends on ZORRO
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
index e8bb97c..588954a 100644
--- a/drivers/net/ethernet/8390/Makefile
+++ b/drivers/net/ethernet/8390/Makefile
@@ -6,10 +6,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_AX88796) += ax88796.o
-obj-$(CONFIG_E2100) += e2100.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
-obj-$(CONFIG_HPLAN) += hp.o 8390p.o
obj-$(CONFIG_HYDRA) += hydra.o 8390.o
obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390p.o
diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c
deleted file mode 100644
index ed55ce8..0000000
diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
deleted file mode 100644
index 52f70f9..0000000
diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c
deleted file mode 100644
index 37fa89a..0000000
--
1.8.1
next prev parent reply other threads:[~2013-01-22 1:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 1:46 [PATCH RFC net-next 00/15] drivers/net: obsolete ISA driver round-up Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 01/15] drivers/net: delete 486 Apricot support Paul Gortmaker
2013-01-22 15:51 ` Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 02/15] drivers/net: delete intel 486 panther onboard ethernet support Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 03/15] drivers/net: delete old 8bit ISA 3c501 driver Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 04/15] drivers/net: delete old parallel port de600/de620 drivers Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 05/15] drivers/net: delete the 3Com 3c505/3c507 intel i825xx support Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 06/15] drivers/net: delete ISA intel eexpress and eepro i825xx drivers Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 07/15] drivers/net: delete intel i825xx based znet notebook driver Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 08/15] drivers/net: delete Racal Interlan ISA ni52 (i825xx) driver Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 09/15] drivers/net: delete old 8 bit ISA Racal ni5010 support Paul Gortmaker
2013-01-22 19:59 ` Jan-Pascal van Best
2013-01-22 20:55 ` Ondrej Zary
2013-01-23 3:27 ` Andreas Mohr
2013-01-22 1:46 ` [PATCH net-next 10/15] drivers/net: delete at1700 ISA 10Mbit driver Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 11/15] drivers/net: delete old fujitsu based eth16i driver Paul Gortmaker
2013-01-22 9:26 ` David Laight
2013-01-22 1:46 ` Paul Gortmaker [this message]
2013-01-22 1:46 ` [PATCH net-next 13/15] drivers/net: delete old DEC depca ISA drivers support Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 14/15] drivers/net: delete Digital EtherWorks-3 support Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 15/15] drivers/net: delete old x86 variant of the seeq8005 driver Paul Gortmaker
2013-01-22 9:46 ` [PATCH RFC net-next 00/15] drivers/net: obsolete ISA driver round-up David Laight
2013-01-22 19:49 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358819182-28032-13-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).