From: Vlad Yasevich <vyasevic@redhat.com>
To: shemminger@vyatta.com
Cc: bridge@lists.linux-foundation.org, davem@davemloft.net,
netdev@vger.kernel.org, shmulik.ladkani@gmail.com
Subject: [PATCH 04/13] bridge: Verify that a vlan is allowed to egress on give port
Date: Tue, 29 Jan 2013 14:52:51 -0500 [thread overview]
Message-ID: <1359489180-10012-5-git-send-email-vyasevic@redhat.com> (raw)
In-Reply-To: <1359489180-10012-1-git-send-email-vyasevic@redhat.com>
When bridge forwards a frame, make sure that a frame is allowed
to egress on that port.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
---
net/bridge/br_forward.c | 1 +
net/bridge/br_input.c | 10 ++++++++++
net/bridge/br_private.h | 16 ++++++++++++++--
net/bridge/br_vlan.c | 20 ++++++++++++++++++++
4 files changed, 45 insertions(+), 2 deletions(-)
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index 02015a5..35b0671 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -31,6 +31,7 @@ static inline int should_deliver(const struct net_bridge_port *p,
const struct sk_buff *skb)
{
return (((p->flags & BR_HAIRPIN_MODE) || skb->dev != p->dev) &&
+ br_allowed_egress(p->br, nbp_get_vlan_info(p), skb) &&
p->state == BR_STATE_FORWARDING);
}
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 4ef3f6b..787d7da 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -35,6 +35,16 @@ static int br_pass_frame_up(struct sk_buff *skb)
brstats->rx_bytes += skb->len;
u64_stats_update_end(&brstats->syncp);
+ /* Bridge is just like any other port. Make sure the
+ * packet is allowed except in promisc modue when someone
+ * may be running packet capture.
+ */
+ if (!(brdev->flags & IFF_PROMISC) &&
+ !br_allowed_egress(br, br_get_vlan_info(br), skb)) {
+ kfree_skb(skb);
+ return NET_RX_DROP;
+ }
+
indev = skb->dev;
skb->dev = brdev;
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index be9ba73..f9ee32f 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -553,6 +553,9 @@ static inline void br_mdb_uninit(void)
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
extern bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v,
struct sk_buff *skb);
+extern bool br_allowed_egress(struct net_bridge *br,
+ const struct net_port_vlans *v,
+ const struct sk_buff *skb);
extern int br_vlan_add(struct net_bridge *br, u16 vid);
extern int br_vlan_delete(struct net_bridge *br, u16 vid);
extern void br_vlan_flush(struct net_bridge *br);
@@ -561,12 +564,14 @@ extern int nbp_vlan_add(struct net_bridge_port *port, u16 vid);
extern int nbp_vlan_delete(struct net_bridge_port *port, u16 vid);
extern void nbp_vlan_flush(struct net_bridge_port *port);
-static inline struct net_port_vlans *br_get_vlan_info(struct net_bridge *br)
+static inline struct net_port_vlans *br_get_vlan_info(
+ const struct net_bridge *br)
{
return rcu_dereference(br->vlan_info);
}
-static inline struct net_port_vlans *nbp_get_vlan_info(struct net_bridge_port *p)
+static inline struct net_port_vlans *nbp_get_vlan_info(
+ const struct net_bridge_port *p)
{
return rcu_dereference(p->vlan_info);
}
@@ -590,6 +595,13 @@ static inline bool br_allowed_ingress(struct net_bridge *br,
return true;
}
+static inline bool br_allowed_egress(struct net_bridge *br,
+ const struct net_port_vlans *v,
+ const struct sk_buff *skb)
+{
+ return true;
+}
+
static inline int br_vlan_add(struct net_bridge *br, u16 vid)
{
return -EOPNOTSUPP;
diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c
index d8174e3..fd6d99e 100644
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -122,6 +122,26 @@ bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v,
return false;
}
+/* Called under RCU. */
+bool br_allowed_egress(struct net_bridge *br,
+ const struct net_port_vlans *v,
+ const struct sk_buff *skb)
+{
+ u16 vid;
+
+ if (!br->vlan_enabled)
+ return true;
+
+ if (!v)
+ return false;
+
+ vid = br_vlan_get_tag(skb);
+ if (test_bit(vid, v->vlan_bitmap))
+ return true;
+
+ return false;
+}
+
/* Must be protected by RTNL */
int br_vlan_add(struct net_bridge *br, u16 vid)
{
--
1.7.7.6
next prev parent reply other threads:[~2013-01-29 19:53 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-29 19:52 [PATCH 00/13] Add basic VLAN support to bridges Vlad Yasevich
2013-01-29 19:52 ` [PATCH 01/13] vlan: wrap hw-acceleration calls in separate functions Vlad Yasevich
2013-01-29 19:52 ` [PATCH 02/13] bridge: Add vlan filtering infrastructure Vlad Yasevich
2013-01-29 19:52 ` [PATCH 03/13] bridge: Validate that vlan is permitted on ingress Vlad Yasevich
2013-01-29 19:52 ` Vlad Yasevich [this message]
2013-01-29 19:52 ` [PATCH 05/13] bridge: Add netlink interface to configure vlans on bridge ports Vlad Yasevich
2013-01-29 19:52 ` [PATCH 06/13] bridge: Add the ability to configure pvid Vlad Yasevich
2013-01-29 19:52 ` [PATCH 07/13] bridge: Implement vlan ingress/egress policy Vlad Yasevich
2013-01-29 19:52 ` [PATCH 08/13] bridge: Add vlan to unicast fdb entries Vlad Yasevich
2013-01-29 19:52 ` [PATCH 09/13] bridge: Add vlan id to multicast groups Vlad Yasevich
2013-01-29 19:52 ` [PATCH 10/13] bridge: Add vlan support to static neighbors Vlad Yasevich
2013-01-29 19:52 ` [PATCH 11/13] bridge: Add vlan support for local fdb entries Vlad Yasevich
2013-01-29 19:52 ` [PATCH 12/13] bridge: Dump vlan information from a bridge port Vlad Yasevich
2013-01-29 19:53 ` [PATCH 13/13] bridge: Separate egress policy bitmap Vlad Yasevich
2013-01-29 20:09 ` [PATCH 00/13] Add basic VLAN support to bridges Vlad Yasevich
2013-01-29 21:11 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359489180-10012-5-git-send-email-vyasevic@redhat.com \
--to=vyasevic@redhat.com \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
--cc=shmulik.ladkani@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).