[PATCH RFC 09/18] r8168: use genphy_soft_reset instead of open coding the soft reset

[Heiner Kallweit <hkallweit1@gmail.com>]

Use genphy_soft_reset instead of open coding the soft reset.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/ethernet/realtek/r8168.c | 14 +-------------
 1 file changed, 1 insertion(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8168.c b/drivers/net/ethernet/realtek/r8168.c
index be6c45b11..62d0e0169 100644
--- a/drivers/net/ethernet/realtek/r8168.c
+++ b/drivers/net/ethernet/realtek/r8168.c
@@ -4308,25 +4308,13 @@ static void rtl8168_phy_timer(struct timer_list *t)
 	rtl_schedule_task(tp, RTL_FLAG_TASK_PHY_PENDING);
 }
 
-DECLARE_RTL_COND(rtl_phy_reset_cond)
-{
-	return rtl8168_xmii_reset_pending(tp);
-}
-
-static void rtl8168_phy_reset(struct net_device *dev,
-			      struct rtl8168_private *tp)
-{
-	rtl8168_xmii_reset_enable(tp);
-	rtl_msleep_loop_wait_low(tp, &rtl_phy_reset_cond, 1, 100);
-}
-
 static void rtl8168_init_phy(struct net_device *dev, struct rtl8168_private *tp)
 {
 	rtl_hw_phy_config(dev);
 
 	pci_write_config_byte(tp->pci_dev, PCI_LATENCY_TIMER, 0x40);
 
-	rtl8168_phy_reset(dev, tp);
+	genphy_soft_reset(dev->phydev);
 
 	rtl8168_set_speed(dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL,
 			  ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
-- 
2.15.1