From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Alexander Duyck <alexander.h.duyck@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next 07/15] ixgbe: Update ixgbe driver to use __netdev_pick_tx in ixgbe_select_queue
Date: Sat, 16 Feb 2013 00:33:28 -0800 [thread overview]
Message-ID: <1361003616-3422-8-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1361003616-3422-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This change updates the ixgbe driver to use __netdev_pick_tx instead of
the current logic it is using to select a queue. The main result of this
change is that ixgbe can now fully support XPS, and in the case of non-FCoE
enabled configs it means we don't need to have our own ndo_select_queue.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 48 +++++++++++++++------------
1 file changed, 26 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 16c9858..872d7aa 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6374,38 +6374,40 @@ static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
return __ixgbe_maybe_stop_tx(tx_ring, size);
}
+#ifdef IXGBE_FCOE
static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) :
- smp_processor_id();
-#ifdef IXGBE_FCOE
- __be16 protocol = vlan_get_protocol(skb);
+ struct ixgbe_adapter *adapter;
+ struct ixgbe_ring_feature *f;
+ int txq;
- if (((protocol == htons(ETH_P_FCOE)) ||
- (protocol == htons(ETH_P_FIP))) &&
- (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) {
- struct ixgbe_ring_feature *f;
+ /*
+ * only execute the code below if protocol is FCoE
+ * or FIP and we have FCoE enabled on the adapter
+ */
+ switch (vlan_get_protocol(skb)) {
+ case __constant_htons(ETH_P_FCOE):
+ case __constant_htons(ETH_P_FIP):
+ adapter = netdev_priv(dev);
- f = &adapter->ring_feature[RING_F_FCOE];
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+ break;
+ default:
+ return __netdev_pick_tx(dev, skb);
+ }
- while (txq >= f->indices)
- txq -= f->indices;
- txq += adapter->ring_feature[RING_F_FCOE].offset;
+ f = &adapter->ring_feature[RING_F_FCOE];
- return txq;
- }
-#endif
+ txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) :
+ smp_processor_id();
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
- while (unlikely(txq >= dev->real_num_tx_queues))
- txq -= dev->real_num_tx_queues;
- return txq;
- }
+ while (txq >= f->indices)
+ txq -= f->indices;
- return skb_tx_hash(dev, skb);
+ return txq + f->offset;
}
+#endif
netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
struct ixgbe_adapter *adapter,
struct ixgbe_ring *tx_ring)
@@ -7129,7 +7131,9 @@ static const struct net_device_ops ixgbe_netdev_ops = {
.ndo_open = ixgbe_open,
.ndo_stop = ixgbe_close,
.ndo_start_xmit = ixgbe_xmit_frame,
+#ifdef IXGBE_FCOE
.ndo_select_queue = ixgbe_select_queue,
+#endif
.ndo_set_rx_mode = ixgbe_set_rx_mode,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = ixgbe_set_mac,
--
1.7.11.7
next prev parent reply other threads:[~2013-02-16 8:33 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-16 8:33 [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2013.02.16 Jeff Kirsher
2013-02-16 8:33 ` [net-next 01/15] e1000: fix whitespace issues and multi-line comments Jeff Kirsher
2013-02-16 8:33 ` [net-next 02/15] e1000e: display a warning message when SmartSpeed works Jeff Kirsher
2013-02-16 8:33 ` [net-next 03/15] igbvf: Make next_to_watch a pointer and adjust memory barriers to avoid races Jeff Kirsher
2013-02-16 8:33 ` [net-next 04/15] igb: increase timeout for ethtool offline self-test Jeff Kirsher
2013-02-16 8:33 ` [net-next 05/15] ixgbe: Define FCoE and Flow director limits much sooner to allow for changes Jeff Kirsher
2013-02-16 8:33 ` [net-next 06/15] ixgbe: Add function for setting XPS queue mapping Jeff Kirsher
2013-02-16 8:33 ` Jeff Kirsher [this message]
2013-02-16 8:33 ` [net-next 08/15] ixgbe: Make ixgbe_setup_tc usable even when DCB is not enabled Jeff Kirsher
2013-02-16 8:33 ` [net-next 09/15] ixgbe: Add support for displaying the number of Tx/Rx channels Jeff Kirsher
2013-02-16 8:33 ` [net-next 10/15] ixgbe: Add support for set_channels ethtool operation Jeff Kirsher
2013-02-16 8:33 ` [net-next 11/15] ixgbe: fix possible data corruption in read_i2c_byte Jeff Kirsher
2013-02-16 8:33 ` [net-next 12/15] ixgbe: cleanup error checking in ixgbe_identify_sfp_module_generic() Jeff Kirsher
2013-02-16 8:33 ` [net-next 13/15] ixgbe: implement SFF diagnostic monitoring via ethtool Jeff Kirsher
2013-02-16 10:53 ` Michał Mirosław
2013-02-17 6:16 ` Tantilov, Emil S
2013-02-17 13:41 ` Michał Mirosław
2013-02-19 22:14 ` Ben Hutchings
2013-02-20 0:26 ` Tantilov, Emil S
2013-02-16 8:33 ` [net-next 14/15] ixgbe: fix Tx timeouts with BQL Jeff Kirsher
2013-02-16 8:33 ` [net-next 15/15] ixgbe: Update DESC_NEEDED define to adjust for changes to MAX_SKB_FRAGS Jeff Kirsher
2013-02-18 17:37 ` [net-next 00/15][pull request] Intel Wired LAN Driver Updates 2013.02.16 David Miller
2013-02-19 18:06 ` Tantilov, Emil S
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361003616-3422-8-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).