From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mugunthan V N Subject: [PATCH v2 1/5] documentation: dt: bindings: cpsw: cleanup documentation Date: Tue, 12 Mar 2013 14:46:34 +0530 Message-ID: <1363079798-18147-2-git-send-email-mugunthanvnm@ti.com> References: <1363079798-18147-1-git-send-email-mugunthanvnm@ti.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , , , Mugunthan V N To: Return-path: Received: from arroyo.ext.ti.com ([192.94.94.40]:60519 "EHLO arroyo.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932342Ab3CLJRS (ORCPT ); Tue, 12 Mar 2013 05:17:18 -0400 In-Reply-To: <1363079798-18147-1-git-send-email-mugunthanvnm@ti.com> Sender: netdev-owner@vger.kernel.org List-ID: Move all the slave note properties to separate section to reduce the confusion between slave note properties and cpsw node properties Signed-off-by: Mugunthan V N --- Documentation/devicetree/bindings/net/cpsw.txt | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt index ecfdf75..8e49c42 100644 --- a/Documentation/devicetree/bindings/net/cpsw.txt +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -18,13 +18,18 @@ Required properties: - cpts_active_slave : Specifies the slave to use for time stamping - cpts_clock_mult : Numerator to convert input clock ticks into nanoseconds - cpts_clock_shift : Denominator to convert input clock ticks into nanoseconds -- phy_id : Specifies slave phy id -- mac-address : Specifies slave MAC address Optional properties: - ti,hwmods : Must be "cpgmac0" - no_bd_ram : Must be 0 or 1 - dual_emac : Specifies Switch to act as Dual EMAC + +Slave Properties: +Required properties: +- phy_id : Specifies slave phy id +- mac-address : Specifies slave MAC address + +Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports Note: "ti,hwmods" field is used to fetch the base address and irq -- 1.7.9.5