[PATCH 19/25] rtlwifi: rtl8188ee: Add files for new driver - part 10

[Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>]

Signed-off-by: Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
Cc: jcheung-IBi9RG/b67k@public.gmane.org
Cc: machen-IBi9RG/b67k@public.gmane.org
Cc: mmarek-AlSwsSmVLrQ@public.gmane.org
Cc: zhiyuan_yang-kXabqFNEczNtrwSWzY7KCg@public.gmane.org
Cc: page_he-kXabqFNEczNtrwSWzY7KCg@public.gmane.org
---
 drivers/net/wireless/rtlwifi/rtl8188ee/rf.c | 467 ++++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8188ee/rf.h |  46 +++
 2 files changed, 513 insertions(+)
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8188ee/rf.c
 create mode 100644 drivers/net/wireless/rtlwifi/rtl8188ee/rf.h

diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/rf.c b/drivers/net/wireless/rtlwifi/rtl8188ee/rf.c
new file mode 100644
index 0000000..e62bcab
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/rf.c
@@ -0,0 +1,467 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2013  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+
+void rtl88e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	switch (bandwidth) {
+	case HT_CHANNEL_WIDTH_20:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					     0xfffff3ff) | BIT(10) | BIT(11));
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+			      rtlphy->rfreg_chnlval[0]);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					     0xfffff3ff) | BIT(10));
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+			      rtlphy->rfreg_chnlval[0]);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 "unknown bandwidth: %#X\n", bandwidth);
+		break;
+	}
+}
+
+void rtl88e_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+				       u8 *plevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 tx_agc[2] = {0, 0}, tmpval;
+	bool turbo_scanoff = false;
+	u8 idx1, idx2;
+	u8 *ptr;
+	u8 direction;
+	u32 pwrtrac_value;
+
+	if (rtlefuse->eeprom_regulatory != 0)
+		turbo_scanoff = true;
+
+	if (mac->act_scanning == true) {
+		tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
+		tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
+
+		if (turbo_scanoff) {
+			for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+				tx_agc[idx1] = plevel[idx1] |
+					       (plevel[idx1] << 8) |
+					       (plevel[idx1] << 16) |
+					       (plevel[idx1] << 24);
+			}
+		}
+	} else {
+		for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+			tx_agc[idx1] = plevel[idx1] | (plevel[idx1] << 8) |
+				       (plevel[idx1] << 16) |
+				       (plevel[idx1] << 24);
+		}
+
+		if (rtlefuse->eeprom_regulatory == 0) {
+			tmpval = (rtlphy->mcs_offset[0][6]) +
+				 (rtlphy->mcs_offset[0][7] << 8);
+			tx_agc[RF90_PATH_A] += tmpval;
+
+			tmpval = (rtlphy->mcs_offset[0][14]) +
+				 (rtlphy->mcs_offset[0][15] << 24);
+			tx_agc[RF90_PATH_B] += tmpval;
+		}
+	}
+
+	for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+		ptr = (u8 *)(&(tx_agc[idx1]));
+		for (idx2 = 0; idx2 < 4; idx2++) {
+			if (*ptr > RF6052_MAX_TX_PWR)
+				*ptr = RF6052_MAX_TX_PWR;
+			ptr++;
+		}
+	}
+	rtl88e_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value);
+	if (direction == 1) {
+		tx_agc[0] += pwrtrac_value;
+		tx_agc[1] += pwrtrac_value;
+	} else if (direction == 2) {
+		tx_agc[0] -= pwrtrac_value;
+		tx_agc[1] -= pwrtrac_value;
+	}
+	tmpval = tx_agc[RF90_PATH_A] & 0xff;
+	rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		"CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		RTXAGC_A_CCK1_MCS32);
+
+	tmpval = tx_agc[RF90_PATH_A] >> 8;
+
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		"CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK11_A_CCK2_11);
+
+	tmpval = tx_agc[RF90_PATH_B] >> 24;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		"CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK11_A_CCK2_11);
+
+	tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		"CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK1_55_MCS32);
+}
+
+static void rtl88e_phy_get_power_base(struct ieee80211_hw *hw,
+				      u8 *pwrlvlofdm, u8 *pwrlvlbw20,
+				      u8 *pwrlvlbw40, u8 channel,
+				      u32 *ofdmbase, u32 *mcsbase)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 base0, base1;
+	u8 i, powerlevel[2];
+
+	for (i = 0; i < 2; i++) {
+		base0 = pwrlvlofdm[i];
+
+		base0 = (base0 << 24) | (base0 << 16) |
+			     (base0 << 8) | base0;
+		*(ofdmbase + i) = base0;
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			"[OFDM power base index rf(%c) = 0x%x]\n",
+			((i == 0) ? 'A' : 'B'), *(ofdmbase + i));
+	}
+
+	for (i = 0; i < 2; i++) {
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20)
+			powerlevel[i] = pwrlvlbw20[i];
+		else
+			powerlevel[i] = pwrlvlbw40[i];
+		base1 = powerlevel[i];
+		base1 = (base1 << 24) |
+		    (base1 << 16) | (base1 << 8) | base1;
+
+		*(mcsbase + i) = base1;
+
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			"[MCS power base index rf(%c) = 0x%x]\n",
+			((i == 0) ? 'A' : 'B'), *(mcsbase + i));
+	}
+}
+
+static void get_txpwr_by_reg(struct ieee80211_hw *hw, u8 chan, u8 index,
+			     u32 *base0, u32 *base1, u32 *outval)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 i, chg = 0, pwr_lim[4], pwr_diff = 0, cust_pwr_dif;
+	u32 writeval, cust_lim, rf, tmp;
+	u8 ch = chan - 1;
+	u8 j;
+
+	for (rf = 0; rf < 2; rf++) {
+		j = index + (rf ? 8 : 0);
+		tmp = ((index < 2) ? base0[rf] : base1[rf]);
+		switch (rtlefuse->eeprom_regulatory) {
+		case 0:
+			chg = 0;
+
+			writeval = rtlphy->mcs_offset[chg][j] + tmp;
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"RTK better performance, "
+				"writeval(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		case 1:
+			if (rtlphy->pwrgroup_cnt == 1) {
+				chg = 0;
+			} else {
+				chg = chan / 3;
+				if (chan == 14)
+					chg = 5;
+			}
+			writeval = rtlphy->mcs_offset[chg][j] + tmp;
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"Realtek regulatory, 20MHz, writeval(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		case 2:
+			writeval = ((index < 2) ? base0[rf] : base1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"Better regulatory, writeval(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		case 3:
+			chg = 0;
+
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					"customer's limit, 40MHz rf(%c) = 0x%x\n",
+					 ((rf == 0) ? 'A' : 'B'),
+					 rtlefuse->pwrgroup_ht40[rf][ch]);
+			} else {
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					"customer's limit, 20MHz rf(%c) = 0x%x\n",
+					 ((rf == 0) ? 'A' : 'B'),
+					 rtlefuse->pwrgroup_ht20[rf][ch]);
+			}
+
+			if (index < 2)
+				pwr_diff = rtlefuse->txpwr_legacyhtdiff[rf][ch];
+			else if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20)
+				pwr_diff = rtlefuse->txpwr_ht20diff[rf][ch];
+
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40)
+				cust_pwr_dif = rtlefuse->pwrgroup_ht40[rf][ch];
+			else
+				cust_pwr_dif = rtlefuse->pwrgroup_ht20[rf][ch];
+
+			if (pwr_diff > cust_pwr_dif)
+				pwr_diff = 0;
+			else
+				pwr_diff = cust_pwr_dif - pwr_diff;
+
+			for (i = 0; i < 4; i++) {
+				pwr_lim[i] = (u8)((rtlphy->mcs_offset[chg][j] &
+					     (0x7f << (i * 8))) >> (i * 8));
+
+				if (pwr_lim[i] > pwr_diff)
+					pwr_lim[i] = pwr_diff;
+			}
+
+			cust_lim = (pwr_lim[3] << 24) | (pwr_lim[2] << 16) |
+				   (pwr_lim[1] << 8) | (pwr_lim[0]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"Customer's limit rf(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), cust_lim);
+
+			writeval = cust_lim + tmp;
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"Customer, writeval rf(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		default:
+			chg = 0;
+			writeval = rtlphy->mcs_offset[chg][j] + tmp;
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				"RTK better performance, writeval "
+				"rf(%c) = 0x%x\n",
+				((rf == 0) ? 'A' : 'B'), writeval);
+			break;
+		}
+
+		if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1)
+			writeval = writeval - 0x06060606;
+		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+			 TXHIGHPWRLEVEL_BT2)
+			writeval -= 0x0c0c0c0c;
+		*(outval + rf) = writeval;
+	}
+}
+
+static void write_ofdm_pwr(struct ieee80211_hw *hw, u8 index, u32 *pvalue)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 regoffset_a[6] = {
+		RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24,
+		RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04,
+		RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12
+	};
+	u16 regoffset_b[6] = {
+		RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24,
+		RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04,
+		RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12
+	};
+	u8 i, rf, pwr_val[4];
+	u32 writeval;
+	u16 regoffset;
+
+	for (rf = 0; rf < 2; rf++) {
+		writeval = pvalue[rf];
+		for (i = 0; i < 4; i++) {
+			pwr_val[i] = (u8) ((writeval & (0x7f <<
+				     (i * 8))) >> (i * 8));
+
+			if (pwr_val[i] > RF6052_MAX_TX_PWR)
+				pwr_val[i] = RF6052_MAX_TX_PWR;
+		}
+		writeval = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+			   (pwr_val[1] << 8) | pwr_val[0];
+
+		if (rf == 0)
+			regoffset = regoffset_a[index];
+		else
+			regoffset = regoffset_b[index];
+		rtl_set_bbreg(hw, regoffset, MASKDWORD, writeval);
+
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			"Set 0x%x = %08x\n", regoffset, writeval);
+	}
+}
+
+void rtl88e_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+					u8 *pwrlvlofdm,
+					u8 *pwrlvlbw20,
+					u8 *pwrlvlbw40, u8 chan)
+{
+	u32 writeval[2], base0[2], base1[2];
+	u8 index;
+	u8 direction;
+	u32 pwrtrac_value;
+
+	rtl88e_phy_get_power_base(hw, pwrlvlofdm, pwrlvlbw20,
+				  pwrlvlbw40, chan, &base0[0],
+				  &base1[0]);
+
+	rtl88e_dm_txpower_track_adjust(hw, 1, &direction, &pwrtrac_value);
+
+	for (index = 0; index < 6; index++) {
+		get_txpwr_by_reg(hw, chan, index, &base0[0], &base1[0],
+				 &writeval[0]);
+		if (direction == 1) {
+			writeval[0] += pwrtrac_value;
+			writeval[1] += pwrtrac_value;
+		} else if (direction == 2) {
+			writeval[0] -= pwrtrac_value;
+			writeval[1] -= pwrtrac_value;
+		}
+		write_ofdm_pwr(hw, index, &writeval[0]);
+	}
+}
+
+static bool rf6052_conf_para(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 u4val = 0;
+	u8 rfpath;
+	bool rtstatus = true;
+	struct bb_reg_def *pphyreg;
+
+	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+		pphyreg = &rtlphy->phyreg_def[rfpath];
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4val = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			u4val = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV << 16);
+			break;
+		}
+
+		rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
+			      B3WIREADDREAALENGTH, 0x0);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
+		udelay(1);
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+			rtstatus = rtl88e_phy_config_rf_with_headerfile(hw,
+					(enum radio_path)rfpath);
+			break;
+		case RF90_PATH_B:
+			rtstatus = rtl88e_phy_config_rf_with_headerfile(hw,
+					(enum radio_path)rfpath);
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl_set_bbreg(hw, pphyreg->rfintfs, BRFSI_RFENV, u4val);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			rtl_set_bbreg(hw, pphyreg->rfintfs, BRFSI_RFENV << 16,
+				      u4val);
+			break;
+		}
+
+		if (rtstatus != true) {
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+				 "Radio[%d] Fail!!", rfpath);
+			return false;
+		}
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "\n");
+	return rtstatus;
+}
+
+bool rtl88e_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (rtlphy->rf_type == RF_1T1R)
+		rtlphy->num_total_rfpath = 1;
+	else
+		rtlphy->num_total_rfpath = 2;
+
+	return rf6052_conf_para(hw);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/rf.h b/drivers/net/wireless/rtlwifi/rtl8188ee/rf.h
new file mode 100644
index 0000000..a39a2a3
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8188ee/rf.h
@@ -0,0 +1,46 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2013  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger-tQ5ms3gMjBLk1uMJSBkQmQ@public.gmane.org>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92C_RF_H__
+#define __RTL92C_RF_H__
+
+#define RF6052_MAX_TX_PWR		0x3F
+#define RF6052_MAX_REG			0x3F
+
+void rtl88e_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+				     u8 bandwidth);
+void rtl88e_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+				       u8 *ppowerlevel);
+void rtl88e_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+					u8 *ppowerlevel_ofdm,
+					u8 *ppowerlevel_bw20,
+					u8 *ppowerlevel_bw40, u8 channel);
+bool rtl88e_phy_rf6052_config(struct ieee80211_hw *hw);
+
+#endif
-- 
1.8.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html