From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: "Akeem G. Abodunrin" <akeem.g.abodunrin@intel.com>,
netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com,
"Aurélien Guillaume" <footplus@gmail.com>,
"Jeff Kirsher" <jeffrey.t.kirsher@intel.com>
Subject: [net-next 05/13] igb: Support to read and export SFF-8472/8079 data
Date: Thu, 4 Apr 2013 04:37:52 -0700 [thread overview]
Message-ID: <1365075480-20183-6-git-send-email-jeffrey.t.kirsher@intel.com> (raw)
In-Reply-To: <1365075480-20183-1-git-send-email-jeffrey.t.kirsher@intel.com>
From: "Akeem G. Abodunrin" <akeem.g.abodunrin@intel.com>
This patch adds support to read and export SFF-8472/8079 (SFP data)
over i2c, through Ethtool.
CC: Aurélien Guillaume <footplus@gmail.com>
Reported-by: Aurélien Guillaume <footplus@gmail.com>
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ethernet/intel/igb/igb.h | 8 +++
drivers/net/ethernet/intel/igb/igb_ethtool.c | 84 ++++++++++++++++++++++++++++
2 files changed, 92 insertions(+)
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 2515140..7cb0398 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -178,6 +178,14 @@ enum igb_tx_flags {
#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IGB_MAX_DATA_PER_TXD)
#define DESC_NEEDED (MAX_SKB_FRAGS + 4)
+/* EEPROM byte offsets */
+#define IGB_SFF_8472_SWAP 0x5C
+#define IGB_SFF_8472_COMP 0x5E
+
+/* Bitmasks */
+#define IGB_SFF_ADDRESSING_MODE 0x4
+#define IGB_SFF_8472_UNSUP 0x00
+
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct igb_tx_buffer {
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 8499c48..17443e4 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2622,6 +2622,88 @@ static int igb_set_eee(struct net_device *netdev,
return 0;
}
+static int igb_get_module_info(struct net_device *netdev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status = E1000_SUCCESS;
+ u16 sff8472_rev, addr_mode;
+ bool page_swap = false;
+
+ if ((hw->phy.media_type == e1000_media_type_copper) ||
+ (hw->phy.media_type == e1000_media_type_unknown))
+ return -EOPNOTSUPP;
+
+ /* Check whether we support SFF-8472 or not */
+ status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_COMP, &sff8472_rev);
+ if (status != E1000_SUCCESS)
+ return -EIO;
+
+ /* addressing mode is not supported */
+ status = igb_read_phy_reg_i2c(hw, IGB_SFF_8472_SWAP, &addr_mode);
+ if (status != E1000_SUCCESS)
+ return -EIO;
+
+ /* addressing mode is not supported */
+ if ((addr_mode & 0xFF) & IGB_SFF_ADDRESSING_MODE) {
+ hw_dbg("Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n");
+ page_swap = true;
+ }
+
+ if ((sff8472_rev & 0xFF) == IGB_SFF_8472_UNSUP || page_swap) {
+ /* We have an SFP, but it does not support SFF-8472 */
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ } else {
+ /* We have an SFP which supports a revision of SFF-8472 */
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ }
+
+ return 0;
+}
+
+static int igb_get_module_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status = E1000_SUCCESS;
+ u16 dataword = 0xFF;
+ int i = 0;
+
+ /* Read the first block, SFF-8079, 2 bytes at a time */
+ for (i = 0; i < ETH_MODULE_SFF_8079_LEN; i += 2) {
+ status = igb_read_phy_reg_i2c(hw, i, &dataword);
+ if (status != E1000_SUCCESS)
+ /* Error occurred while reading module */
+ return -EIO;
+
+ data[i] = (dataword >> 8) & 0xFF;
+ data[i+1] = dataword & 0xFF;
+ }
+
+ /* If the second block is requested, check if SFF-8472 is supported. */
+ if (ee->len == ETH_MODULE_SFF_8472_LEN) {
+ if (data[IGB_SFF_8472_COMP] == IGB_SFF_8472_UNSUP)
+ return -EOPNOTSUPP;
+
+ /* Read the second block, SFF-8472, 2 bytes at a time */
+ for (i = ETH_MODULE_SFF_8079_LEN;
+ i < ETH_MODULE_SFF_8472_LEN; i += 2) {
+ status = igb_read_phy_reg_i2c(hw, i, &dataword);
+ if (status != E1000_SUCCESS)
+ return -EIO;
+
+ data[i] = (dataword >> 8) & 0xFF;
+ data[i+1] = dataword & 0xFF;
+ }
+ }
+
+ return 0;
+}
+
static int igb_ethtool_begin(struct net_device *netdev)
{
struct igb_adapter *adapter = netdev_priv(netdev);
@@ -2666,6 +2748,8 @@ static const struct ethtool_ops igb_ethtool_ops = {
.set_rxnfc = igb_set_rxnfc,
.get_eee = igb_get_eee,
.set_eee = igb_set_eee,
+ .get_module_info = igb_get_module_info,
+ .get_module_eeprom = igb_get_module_eeprom,
.begin = igb_ethtool_begin,
.complete = igb_ethtool_complete,
};
--
1.7.11.7
next prev parent reply other threads:[~2013-04-04 11:38 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-04 11:37 [net-next 00/13][pull request] Intel Wired LAN Driver Updates Jeff Kirsher
2013-04-04 11:37 ` [net-next 01/13] ixgbe: Mask off check of frag_off as we only want fragment offset Jeff Kirsher
2013-04-04 11:37 ` [net-next 02/13] ixgbe: don't do arithmetic operations on bitmasks Jeff Kirsher
2013-04-04 11:37 ` [net-next 03/13] ixgbe: Drop check for PAGE_SIZE from ixgbe_xmit_frame_ring Jeff Kirsher
2013-04-04 11:37 ` [net-next 04/13] igb: Support for 100base-fx SFP Jeff Kirsher
2013-04-04 11:37 ` Jeff Kirsher [this message]
2013-04-04 19:07 ` [net-next 05/13] igb: Support to read and export SFF-8472/8079 data Ben Hutchings
2013-04-04 22:17 ` Abodunrin, Akeem G
2013-04-04 11:37 ` [net-next 06/13] igb: Implement support to power sfp cage and turn on I2C Jeff Kirsher
2013-04-04 11:37 ` [net-next 07/13] igb: random code and comments fix Jeff Kirsher
2013-04-04 14:22 ` Sergei Shtylyov
2013-04-04 11:37 ` [net-next 08/13] igb: Mask off check of frag_off as we only want fragment offset Jeff Kirsher
2013-04-04 11:37 ` [net-next 09/13] igb: Pull adapter out of main path in igb_xmit_frame_ring Jeff Kirsher
2013-04-04 14:15 ` Sergei Shtylyov
2013-04-04 11:37 ` [net-next 10/13] igb: Use rx/tx_itr_setting when setting up initial value of itr Jeff Kirsher
2013-04-04 11:37 ` [net-next 11/13] igb: Fix sparse warnings on function pointers Jeff Kirsher
2013-04-04 11:37 ` [net-next 12/13] igb: Fix code comments and whitespace Jeff Kirsher
2013-04-04 11:38 ` [net-next 13/13] igb: Enable EEE LP advertisement Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365075480-20183-6-git-send-email-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=akeem.g.abodunrin@intel.com \
--cc=davem@davemloft.net \
--cc=footplus@gmail.com \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).