From: Shahed Shaikh <shahed.shaikh@qlogic.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, Dept_NX_Linux_NIC_Driver@qlogic.com,
Manish Chopra <manish.chopra@qlogic.com>
Subject: [PATCH net-next 8/9] qlcnic: Enhanced channel configuration logs
Date: Sat, 13 Apr 2013 13:28:33 -0400 [thread overview]
Message-ID: <1365874114-6759-9-git-send-email-shahed.shaikh@qlogic.com> (raw)
In-Reply-To: <1365874114-6759-1-git-send-email-shahed.shaikh@qlogic.com>
From: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 3 +-
.../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c | 2 +-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 37 ++++++++++++++++----
3 files changed, 33 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 53c414f..2902a15 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -1483,7 +1483,8 @@ void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings);
int qlcnic_diag_alloc_res(struct net_device *netdev, int test);
netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
int qlcnic_set_max_rss(struct qlcnic_adapter *, u8, size_t);
-int qlcnic_validate_max_rss(u8, u8);
+int qlcnic_validate_max_rss(struct qlcnic_adapter *adapter,
+ __u32 val);
void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter);
int qlcnic_enable_msix(struct qlcnic_adapter *, u32);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
index 48434ee..80e1137 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -637,7 +637,7 @@ static int qlcnic_set_channels(struct net_device *dev,
channel->tx_count != channel->max_tx)
return -EINVAL;
- err = qlcnic_validate_max_rss(channel->max_rx, channel->rx_count);
+ err = qlcnic_validate_max_rss(adapter, channel->rx_count);
if (err)
return err;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 2a72c4f..ae1b555 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -3276,22 +3276,45 @@ qlcnicvf_start_firmware(struct qlcnic_adapter *adapter)
return err;
}
-int qlcnic_validate_max_rss(u8 max_hw, u8 val)
+int qlcnic_validate_max_rss(struct qlcnic_adapter *adapter,
+ __u32 val)
{
u32 max_allowed;
+ u8 max_hw = adapter->ahw->max_rx_ques;
- if (max_hw > QLC_MAX_SDS_RINGS) {
- max_hw = QLC_MAX_SDS_RINGS;
- pr_info("max rss reset to %d\n", QLC_MAX_SDS_RINGS);
+ if (val > QLC_MAX_SDS_RINGS) {
+ netdev_err(adapter->netdev,
+ "RSS value should not be higher than %u\n",
+ QLC_MAX_SDS_RINGS);
+ return -EINVAL;
}
max_allowed = rounddown_pow_of_two(min_t(int, max_hw,
num_online_cpus()));
- if ((val > max_allowed) || (val < 2) || !is_power_of_2(val)) {
- pr_info("rss_ring valid range [2 - %x] in powers of 2\n",
- max_allowed);
+
+ if ((val > max_allowed) || (val < 2) || !is_power_of_2(val)) {
+ if (!is_power_of_2(val))
+ netdev_err(adapter->netdev, "RSS value should be a power of 2\n");
+
+ if (val < 2)
+ netdev_err(adapter->netdev, "RSS value should not be lower than 2\n");
+
+ if (val > max_hw)
+ netdev_err(adapter->netdev,
+ "RSS value should not be higher than[%u], the max RSS rings supported by the adapter\n",
+ max_hw);
+
+ if (val > num_online_cpus())
+ netdev_err(adapter->netdev,
+ "RSS value should not be higher than[%u], the max number of CPUs in the system\n",
+ num_online_cpus());
+
+ netdev_err(adapter->netdev, "Unable to configure %u RSS rings\n",
+ val);
+
return -EINVAL;
}
+
return 0;
}
--
1.5.6
next prev parent reply other threads:[~2013-04-13 17:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-13 17:28 [PATCH net-next 0/9] qlcnic: Bug fixes and enhancements Shahed Shaikh
2013-04-13 17:28 ` [PATCH net-next 1/9] qlcnic: Implement GET_LED_STATUS command for 82xx adapter Shahed Shaikh
2013-04-14 10:55 ` Francois Romieu
2013-04-13 17:28 ` [PATCH net-next 2/9] qlcnic: Fix typo in logs Shahed Shaikh
2013-04-13 17:28 ` [PATCH net-next 3/9] qlcnic: Add identifying string for 83xx adapter Shahed Shaikh
2013-04-14 10:55 ` Francois Romieu
2013-04-13 17:28 ` [PATCH net-next 4/9] qlcnic: fix beaconing test for 82xx adapter Shahed Shaikh
2013-04-14 10:55 ` Francois Romieu
2013-04-13 17:28 ` [PATCH net-next 5/9] qlcnic: Enable Interrupt Coalescing for 83xx adapter Shahed Shaikh
2013-04-14 10:55 ` Francois Romieu
2013-04-13 17:28 ` [PATCH net-next 6/9] qlcnic: Fix recurring firmware dump collection Shahed Shaikh
2013-04-14 10:55 ` Francois Romieu
2013-04-13 17:28 ` [PATCH net-next 7/9] qlcnic: fix TSO race condition Shahed Shaikh
2013-04-13 18:35 ` Eric Dumazet
2013-04-14 17:55 ` Shahed Shaikh
2013-04-13 17:28 ` Shahed Shaikh [this message]
2013-04-14 10:55 ` [PATCH net-next 8/9] qlcnic: Enhanced channel configuration logs Francois Romieu
2013-04-13 17:28 ` [PATCH net-next 9/9] qlcnic: Bump up the version to 5.2.41 Shahed Shaikh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1365874114-6759-9-git-send-email-shahed.shaikh@qlogic.com \
--to=shahed.shaikh@qlogic.com \
--cc=Dept_NX_Linux_NIC_Driver@qlogic.com \
--cc=davem@davemloft.net \
--cc=manish.chopra@qlogic.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).