netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
To: Mugunthan V N <mugunthanvnm@ti.com>
Cc: tglx@linutronix.de, netdev@vger.kernel.org,
	"David S. Miller" <davem@davemloft.net>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: [PATCH 4/4] net/cpsw: fix irq_disable() with threaded interrupts
Date: Wed, 24 Apr 2013 20:48:25 +0200	[thread overview]
Message-ID: <1366829305-9752-5-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1366829305-9752-1-git-send-email-bigeasy@linutronix.de>

During high throughput it is likely that we receive both: an RX and TX
interrupt. The normal behaviour is that once we enter the ISR the
interrupts are disabled in the IRQ chip and so the ISR is invoked only
once and the interrupt line is disabled once. It will be re-enabled
after napi completes.
With threaded interrupts on the other hand the interrupt the interrupt
is disabled immediately and the ISR is marked for "later". By having TX
and RX interrupt marked pending we invoke them both and disable the
interrupt line twice. The napi callback is still executed once and so
after it completes we remain with interrupts disabled.

The initial patch simply removed the cpsw_{enable|disable}_irq() calls
and it worked well on my AM335X ES1.0 (beagle bone). On ES2.0 (beagle
bone black) it caused an never ending interrupt (even after the mask via
cpsw_intr_disable()) according to Mugunthan V N. Since I don't have the
ES2.0 and no idea what is going on this patch tracks the state of the
irq_disable() call and execute it only when not yet done.
The book keeping is done on the first struct since with dual_emac we can
have two of those and only one interrupt line.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
 drivers/net/ethernet/ti/cpsw.c |   25 ++++++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 8b643d9..2633be6 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -348,6 +348,7 @@ struct cpsw_priv {
 	/* snapshot of IRQ numbers */
 	u32 irqs_table[4];
 	u32 num_irqs;
+	bool irq_enabled;
 	struct cpts *cpts;
 	u32 emac_port;
 };
@@ -515,7 +516,10 @@ static irqreturn_t cpsw_interrupt(int irq, void *dev_id)
 		return IRQ_NONE;
 
 	cpsw_intr_disable(priv);
-	cpsw_disable_irq(priv);
+	if (priv->irq_enabled == true) {
+		cpsw_disable_irq(priv);
+		priv->irq_enabled = false;
+	}
 
 	if (netif_running(priv->ndev)) {
 		napi_schedule(&priv->napi);
@@ -544,10 +548,16 @@ static int cpsw_poll(struct napi_struct *napi, int budget)
 
 	num_rx = cpdma_chan_process(priv->rxch, budget);
 	if (num_rx < budget) {
+		struct cpsw_priv *prim_cpsw;
+
 		napi_complete(napi);
 		cpsw_intr_enable(priv);
 		cpdma_ctlr_eoi(priv->dma, CPDMA_EOI_RX);
-		cpsw_enable_irq(priv);
+		prim_cpsw = cpsw_get_slave_priv(priv, 0);
+		if (prim_cpsw->irq_enabled == false) {
+			cpsw_enable_irq(priv);
+			prim_cpsw->irq_enabled = true;
+		}
 	}
 
 	if (num_rx || num_tx)
@@ -886,6 +896,7 @@ static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_priv *priv)
 static int cpsw_ndo_open(struct net_device *ndev)
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
+	struct cpsw_priv *prim_cpsw;
 	int i, ret;
 	u32 reg;
 
@@ -953,6 +964,14 @@ static int cpsw_ndo_open(struct net_device *ndev)
 		cpsw_set_coalesce(ndev, &coal);
 	}
 
+	prim_cpsw = cpsw_get_slave_priv(priv, 0);
+	if (prim_cpsw->irq_enabled == false) {
+		if ((priv == prim_cpsw) || !netif_running(prim_cpsw->ndev)) {
+			prim_cpsw->irq_enabled = true;
+			cpsw_enable_irq(prim_cpsw);
+		}
+	}
+
 	cpdma_ctlr_start(priv->dma);
 	cpsw_intr_enable(priv);
 	napi_enable(&priv->napi);
@@ -1856,7 +1875,7 @@ static int cpsw_probe(struct platform_device *pdev)
 		}
 		k++;
 	}
-
+	priv->irq_enabled = true;
 	ndev->features |= NETIF_F_HW_VLAN_FILTER;
 
 	ndev->netdev_ops = &cpsw_netdev_ops;
-- 
1.7.10.4

  parent reply	other threads:[~2013-04-24 18:48 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-24 18:48 Second batch of cpsw patches Sebastian Andrzej Siewior
2013-04-24 18:48 ` [PATCH 1/4] net/ti: add MODULE_DEVICE_TABLE + MODULE_LICENSE Sebastian Andrzej Siewior
2013-04-25  6:29   ` Mugunthan V N
2013-04-24 18:48 ` [PATCH 2/4] net/cpsw: make sure modules remove does not leak any ressources Sebastian Andrzej Siewior
2013-04-25  6:31   ` Mugunthan V N
2013-04-25 12:47   ` Sergei Shtylyov
2013-04-24 18:48 ` [PATCH 3/4] net/cpsw: optimize the for_each_slave_macro() Sebastian Andrzej Siewior
2013-04-25  6:31   ` Mugunthan V N
2013-04-24 18:48 ` Sebastian Andrzej Siewior [this message]
2013-04-25  6:35   ` [PATCH 4/4] net/cpsw: fix irq_disable() with threaded interrupts Mugunthan V N

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1366829305-9752-5-git-send-email-bigeasy@linutronix.de \
    --to=bigeasy@linutronix.de \
    --cc=davem@davemloft.net \
    --cc=mugunthanvnm@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).