netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <Dept_NX_Linux_NIC_Driver@qlogic.com>,
	Himanshu Madhani <himanshu.madhani@qlogic.com>
Subject: [PATCH net v2 3/8] qlcnic: Fix missing bracket in module parameter.
Date: Thu, 9 May 2013 15:25:11 -0400	[thread overview]
Message-ID: <1368127516-9943-4-git-send-email-shahed.shaikh@qlogic.com> (raw)
In-Reply-To: <1368127516-9943-1-git-send-email-shahed.shaikh@qlogic.com>

From: Himanshu Madhani <himanshu.madhani@qlogic.com>

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 04037b5..d97446a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -37,24 +37,24 @@ MODULE_PARM_DESC(qlcnic_mac_learn,
 		 "Mac Filter (0=learning is disabled, 1=Driver learning is enabled, 2=FDB learning is enabled)");
 
 int qlcnic_use_msi = 1;
-MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled");
+MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled)");
 module_param_named(use_msi, qlcnic_use_msi, int, 0444);
 
 int qlcnic_use_msi_x = 1;
-MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
+MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled)");
 module_param_named(use_msi_x, qlcnic_use_msi_x, int, 0444);
 
 int qlcnic_auto_fw_reset = 1;
-MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
+MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled)");
 module_param_named(auto_fw_reset, qlcnic_auto_fw_reset, int, 0644);
 
 int qlcnic_load_fw_file;
-MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
+MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file)");
 module_param_named(load_fw_file, qlcnic_load_fw_file, int, 0444);
 
 int qlcnic_config_npars;
 module_param(qlcnic_config_npars, int, 0444);
-MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled");
+MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled)");
 
 static int qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 static void qlcnic_remove(struct pci_dev *pdev);
-- 
1.5.6

  parent reply	other threads:[~2013-05-09 19:50 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-09 19:25 [PATCH net v2 0/8] qlcnic: Bug fixes Shahed Shaikh
2013-05-09 19:25 ` [PATCH net v2 1/8] qlcnic: Fix setting MAC address Shahed Shaikh
2013-05-09 19:25 ` [PATCH net v2 2/8] qlcnic: Fix ethtool strings Shahed Shaikh
2013-05-09 19:25 ` Shahed Shaikh [this message]
2013-05-09 19:25 ` [PATCH net v2 4/8] qlcnic: Fix ethtool supported port status for 83xx Shahed Shaikh
2013-05-09 19:25 ` [PATCH net v2 5/8] qlcnic: Fix reset recovery after transmit timeout Shahed Shaikh
2013-05-09 19:25 ` [PATCH net v2 6/8] qlcnic: Fix bug in diagnostics test reset recovery path Shahed Shaikh
2013-05-09 19:25 ` [PATCH net v2 7/8] qlcnic: Fix mailbox response handling Shahed Shaikh
2013-05-09 19:25 ` [PATCH net v2 8/8] qlcnic: Fix validation of link event command Shahed Shaikh
2013-05-11 23:01 ` [PATCH net v2 0/8] qlcnic: Bug fixes David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1368127516-9943-4-git-send-email-shahed.shaikh@qlogic.com \
    --to=shahed.shaikh@qlogic.com \
    --cc=Dept_NX_Linux_NIC_Driver@qlogic.com \
    --cc=davem@davemloft.net \
    --cc=himanshu.madhani@qlogic.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).