From: Shahed Shaikh <shahed.shaikh@qlogic.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <Dept_NX_Linux_NIC_Driver@qlogic.com>,
Shahed Shaikh <shahed.shaikh@qlogic.com>
Subject: [PATCH net-next 00/12] qlcnic: Enhancements and cleanup
Date: Fri, 24 May 2013 03:04:24 -0400 [thread overview]
Message-ID: <1369379076-4718-1-git-send-email-shahed.shaikh@qlogic.com> (raw)
From: Shahed Shaikh <shahed.shaikh@qlogic.com>
This patch series includes following changes:
* Support for spoof check configuration per VF using
iproute2 tool.
* Set HW mask for 8300 adapter in INT-x mode to stop generating
interrupts.
* Updated IRQ name for 8200 and 8300 Series adapter as per
format used by other multiqueue drivers.
* Remove qlcnic_config_npars module parameter.
* Initialize trans_work and idc_aen_work at VF probe.
* Convert netsted if-else into switch-case statement.
* Change in diagnostics routine.
* Modify reset recovery path in diag mode by providing diagnostics
routines enough time to unwind before proceeding with reset recovery.
* Implement GET_LED_STATUS command for 82xx adapter and refactor
qlcnic_store_beacon() to split 8200 and 8300 specific calls.
* Some cleanup and log enhancements
Please apply to net-next.
Thanks,
Shahed
Himanshu Madhani (3):
qlcnic: Disable INT-x interrupt for 83xx on driver unload
qlcnic: Update IRQ name for 8200 and 8300 Series adapter.
qlcnic: Implement GET_LED_STATUS command for 82xx adapter.
Jitendra Kalsaria (1):
qlcnic: Convert nested if-else to switch-case
Manish Chopra (2):
qlcnic: qlcnic_get_board_name() function cleanup
qlcnic: Enhance virtual NIC logging
Rajesh Borundia (1):
qlcnic: Support spoof check config.
Shahed Shaikh (2):
qlcnic: Remove qlcnic_config_npars module parameter
qlcnic: Update version to 5.2.43
Sony Chacko (2):
qlcnic: diagnostics routine changes
qlcnic: modify reset recovery path in diag mode
Sucheta Chakraborty (1):
qlcnic: Initialize trans_work and idc_aen_work at VF probe.
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 27 ++++-
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 77 +++++++-----
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h | 1 +
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 35 +++++-
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c | 39 +++----
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 45 ++++----
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c | 15 +++
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h | 1 +
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 85 ++++++++------
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h | 2 +
.../ethernet/qlogic/qlcnic/qlcnic_sriov_common.c | 7 +-
.../net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 36 ++++++
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c | 126 ++++++++++++--------
13 files changed, 326 insertions(+), 170 deletions(-)
next reply other threads:[~2013-05-24 7:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-24 7:04 Shahed Shaikh [this message]
2013-05-24 7:04 ` [PATCH net-next 01/12] qlcnic: Support spoof check config Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 02/12] qlcnic: Disable INT-x interrupt for 83xx on driver unload Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 03/12] qlcnic: Update IRQ name for 8200 and 8300 Series adapter Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 04/12] qlcnic: Remove qlcnic_config_npars module parameter Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 05/12] qlcnic: Initialize trans_work and idc_aen_work at VF probe Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 06/12] qlcnic: Convert nested if-else to switch-case Shahed Shaikh
2013-05-24 8:36 ` David Laight
2013-05-24 7:04 ` [PATCH net-next 07/12] qlcnic: diagnostics routine changes Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 08/12] qlcnic: modify reset recovery path in diag mode Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 09/12] qlcnic: Implement GET_LED_STATUS command for 82xx adapter Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 10/12] qlcnic: qlcnic_get_board_name() function cleanup Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 11/12] qlcnic: Enhance virtual NIC logging Shahed Shaikh
2013-05-24 7:04 ` [PATCH net-next 12/12] qlcnic: Update version to 5.2.43 Shahed Shaikh
2013-05-25 6:05 ` [PATCH net-next 00/12] qlcnic: Enhancements and cleanup David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369379076-4718-1-git-send-email-shahed.shaikh@qlogic.com \
--to=shahed.shaikh@qlogic.com \
--cc=Dept_NX_Linux_NIC_Driver@qlogic.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).