From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: linux-can@vger.kernel.org, davem@davemloft.net,
Marc Kleine-Budde <mkl@pengutronix.de>,
Stephane Grosjean <s.grosjean@peak-system.com>
Subject: [PATCH 3/3] net: can: peak_usb: Do not do dma on the stack
Date: Mon, 3 Jun 2013 14:15:33 +0200 [thread overview]
Message-ID: <1370261733-22935-4-git-send-email-mkl@pengutronix.de> (raw)
In-Reply-To: <1370261733-22935-1-git-send-email-mkl@pengutronix.de>
smatch reports the following warnings:
drivers/net/can/usb/peak_usb/pcan_usb_pro.c:514 pcan_usb_pro_drv_loaded() error: doing dma on the stack (buffer)
drivers/net/can/usb/peak_usb/pcan_usb_pro.c:878 pcan_usb_pro_init() error: doing dma on the stack (&fi)
drivers/net/can/usb/peak_usb/pcan_usb_pro.c:889 pcan_usb_pro_init() error: doing dma on the stack (&bi)
See "Documentation/DMA-API-HOWTO.txt" section "What memory is DMA'able?"
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 61 +++++++++++++++++++----------
drivers/net/can/usb/peak_usb/pcan_usb_pro.h | 1 +
2 files changed, 41 insertions(+), 21 deletions(-)
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index 30d79bf..8ee9d15 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -504,15 +504,24 @@ static int pcan_usb_pro_restart_async(struct peak_usb_device *dev,
return usb_submit_urb(urb, GFP_ATOMIC);
}
-static void pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded)
+static int pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded)
{
- u8 buffer[16];
+ u8 *buffer;
+ int err;
+
+ buffer = kmalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
buffer[0] = 0;
buffer[1] = !!loaded;
- pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT,
- PCAN_USBPRO_FCT_DRVLD, buffer, sizeof(buffer));
+ err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_FCT,
+ PCAN_USBPRO_FCT_DRVLD, buffer,
+ PCAN_USBPRO_FCT_DRVLD_REQ_LEN);
+ kfree(buffer);
+
+ return err;
}
static inline
@@ -851,21 +860,24 @@ static int pcan_usb_pro_stop(struct peak_usb_device *dev)
*/
static int pcan_usb_pro_init(struct peak_usb_device *dev)
{
- struct pcan_usb_pro_interface *usb_if;
struct pcan_usb_pro_device *pdev =
container_of(dev, struct pcan_usb_pro_device, dev);
+ struct pcan_usb_pro_interface *usb_if = NULL;
+ struct pcan_usb_pro_fwinfo *fi = NULL;
+ struct pcan_usb_pro_blinfo *bi = NULL;
+ int err;
/* do this for 1st channel only */
if (!dev->prev_siblings) {
- struct pcan_usb_pro_fwinfo fi;
- struct pcan_usb_pro_blinfo bi;
- int err;
-
/* allocate netdevices common structure attached to first one */
usb_if = kzalloc(sizeof(struct pcan_usb_pro_interface),
GFP_KERNEL);
- if (!usb_if)
- return -ENOMEM;
+ fi = kmalloc(sizeof(struct pcan_usb_pro_fwinfo), GFP_KERNEL);
+ bi = kmalloc(sizeof(struct pcan_usb_pro_blinfo), GFP_KERNEL);
+ if (!usb_if || !fi || !bi) {
+ err = -ENOMEM;
+ goto err_out;
+ }
/* number of ts msgs to ignore before taking one into account */
usb_if->cm_ignore_count = 5;
@@ -877,34 +889,34 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev)
*/
err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO,
PCAN_USBPRO_INFO_FW,
- &fi, sizeof(fi));
+ fi, sizeof(*fi));
if (err) {
- kfree(usb_if);
dev_err(dev->netdev->dev.parent,
"unable to read %s firmware info (err %d)\n",
pcan_usb_pro.name, err);
- return err;
+ goto err_out;
}
err = pcan_usb_pro_send_req(dev, PCAN_USBPRO_REQ_INFO,
PCAN_USBPRO_INFO_BL,
- &bi, sizeof(bi));
+ bi, sizeof(*bi));
if (err) {
- kfree(usb_if);
dev_err(dev->netdev->dev.parent,
"unable to read %s bootloader info (err %d)\n",
pcan_usb_pro.name, err);
- return err;
+ goto err_out;
}
+ /* tell the device the can driver is running */
+ err = pcan_usb_pro_drv_loaded(dev, 1);
+ if (err)
+ goto err_out;
+
dev_info(dev->netdev->dev.parent,
"PEAK-System %s hwrev %u serial %08X.%08X (%u channels)\n",
pcan_usb_pro.name,
- bi.hw_rev, bi.serial_num_hi, bi.serial_num_lo,
+ bi->hw_rev, bi->serial_num_hi, bi->serial_num_lo,
pcan_usb_pro.ctrl_count);
-
- /* tell the device the can driver is running */
- pcan_usb_pro_drv_loaded(dev, 1);
} else {
usb_if = pcan_usb_pro_dev_if(dev->prev_siblings);
}
@@ -916,6 +928,13 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev)
pcan_usb_pro_set_led(dev, 0, 1);
return 0;
+
+ err_out:
+ kfree(bi);
+ kfree(fi);
+ kfree(usb_if);
+
+ return err;
}
static void pcan_usb_pro_exit(struct peak_usb_device *dev)
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
index a869918..32275af 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.h
@@ -29,6 +29,7 @@
/* Vendor Request value for XXX_FCT */
#define PCAN_USBPRO_FCT_DRVLD 5 /* tell device driver is loaded */
+#define PCAN_USBPRO_FCT_DRVLD_REQ_LEN 16
/* PCAN_USBPRO_INFO_BL vendor request record type */
struct __packed pcan_usb_pro_blinfo {
--
1.8.2.rc2
next prev parent reply other threads:[~2013-06-03 12:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-03 12:15 pull-request: can 2013-06-03 Marc Kleine-Budde
2013-06-03 12:15 ` [PATCH 1/3] net: can: kvaser_usb: fix reception on "USBcan Pro" and "USBcan R" type hardware Marc Kleine-Budde
2013-06-03 12:15 ` [PATCH 2/3] net: can: esd_usb2: Do not do dma on the stack Marc Kleine-Budde
2013-06-03 12:15 ` Marc Kleine-Budde [this message]
2013-12-12 14:44 ` [PATCH 3/3] net: can: peak_usb: " Stephane Grosjean
2013-12-14 13:37 ` Marc Kleine-Budde
2013-06-04 21:31 ` pull-request: can 2013-06-03 David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370261733-22935-4-git-send-email-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=linux-can@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=s.grosjean@peak-system.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).