From: "Dmitry Kravkov" <dmitry@broadcom.com>
To: davem@davemloft.net, netdev@vger.kernel.org, eilong@broadcom.com
Cc: "Dmitry Kravkov" <dmitry@broadcom.com>
Subject: [PATCH v2 net-next 2/2] bnx2x: replace mechanism to check for next available packet
Date: Wed, 19 Jun 2013 01:36:05 +0300 [thread overview]
Message-ID: <1371594965-12546-3-git-send-email-dmitry@broadcom.com> (raw)
In-Reply-To: <1371594965-12546-1-git-send-email-dmitry@broadcom.com>
Check next packet availability by validating that HW has finished CQE
placement. This saves latency of another dma transaction performed to update
SB indexes.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 49 ++++++++++--------------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 26 +++++++++----
drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 3 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 1 -
4 files changed, 42 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 20eefa6..ca7f2bb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -804,40 +804,32 @@ int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
{
struct bnx2x *bp = fp->bp;
u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons;
- u16 hw_comp_cons, sw_comp_cons, sw_comp_prod;
+ u16 sw_comp_cons, sw_comp_prod;
int rx_pkt = 0;
+ union eth_rx_cqe *cqe;
+ struct eth_fast_path_rx_cqe *cqe_fp;
#ifdef BNX2X_STOP_ON_ERROR
if (unlikely(bp->panic))
return 0;
#endif
- /* CQ "next element" is of the size of the regular element,
- that's why it's ok here */
- hw_comp_cons = le16_to_cpu(*fp->rx_cons_sb);
- if ((hw_comp_cons & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
- hw_comp_cons++;
-
bd_cons = fp->rx_bd_cons;
bd_prod = fp->rx_bd_prod;
bd_prod_fw = bd_prod;
sw_comp_cons = fp->rx_comp_cons;
sw_comp_prod = fp->rx_comp_prod;
- /* Memory barrier necessary as speculative reads of the rx
- * buffer can be ahead of the index in the status block
- */
- rmb();
+ comp_ring_cons = RCQ_BD(sw_comp_cons);
+ cqe = &fp->rx_comp_ring[comp_ring_cons];
+ cqe_fp = &cqe->fast_path_cqe;
DP(NETIF_MSG_RX_STATUS,
- "queue[%d]: hw_comp_cons %u sw_comp_cons %u\n",
- fp->index, hw_comp_cons, sw_comp_cons);
+ "queue[%d]: sw_comp_cons %u\n", fp->index, sw_comp_cons);
- while (sw_comp_cons != hw_comp_cons) {
+ while (BNX2X_IS_CQE_COMPLETED(cqe_fp)) {
struct sw_rx_bd *rx_buf = NULL;
struct sk_buff *skb;
- union eth_rx_cqe *cqe;
- struct eth_fast_path_rx_cqe *cqe_fp;
u8 cqe_fp_flags;
enum eth_rx_cqe_type cqe_fp_type;
u16 len, pad, queue;
@@ -849,12 +841,9 @@ int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
return 0;
#endif
- comp_ring_cons = RCQ_BD(sw_comp_cons);
bd_prod = RX_BD(bd_prod);
bd_cons = RX_BD(bd_cons);
- cqe = &fp->rx_comp_ring[comp_ring_cons];
- cqe_fp = &cqe->fast_path_cqe;
cqe_fp_flags = cqe_fp->type_error_flags;
cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE;
@@ -1018,8 +1007,15 @@ next_cqe:
sw_comp_prod = NEXT_RCQ_IDX(sw_comp_prod);
sw_comp_cons = NEXT_RCQ_IDX(sw_comp_cons);
+ /* mark CQE as free */
+ BNX2X_SEED_CQE(cqe_fp);
+
if (rx_pkt == budget)
break;
+
+ comp_ring_cons = RCQ_BD(sw_comp_cons);
+ cqe = &fp->rx_comp_ring[comp_ring_cons];
+ cqe_fp = &cqe->fast_path_cqe;
} /* while */
fp->rx_bd_cons = bd_cons;
@@ -1055,8 +1051,6 @@ static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie)
#endif
/* Handle Rx and Tx according to MSI-X vector */
- prefetch(fp->rx_cons_sb);
-
for_each_cos_in_tx_queue(fp, cos)
prefetch(fp->txdata_ptr[cos]->tx_cons_sb);
@@ -3137,10 +3131,8 @@ int bnx2x_low_latency_recv(struct napi_struct *napi)
if (!bnx2x_fp_lock_poll(fp))
return LL_FLUSH_BUSY;
- if (bnx2x_has_rx_work(fp)) {
- bnx2x_update_fpsb_idx(fp);
+ if (bnx2x_has_rx_work(fp))
found = bnx2x_rx_int(fp, 4);
- }
bnx2x_fp_unlock_poll(fp);
@@ -4339,10 +4331,11 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
&bnx2x_fp(bp, index, rx_desc_mapping),
sizeof(struct eth_rx_bd) * NUM_RX_BD);
- BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_comp_ring),
- &bnx2x_fp(bp, index, rx_comp_mapping),
- sizeof(struct eth_fast_path_rx_cqe) *
- NUM_RCQ_BD);
+ /* Seed all CQEs by 1s */
+ BNX2X_PCI_FALLOC(bnx2x_fp(bp, index, rx_comp_ring),
+ &bnx2x_fp(bp, index, rx_comp_mapping),
+ sizeof(struct eth_fast_path_rx_cqe) *
+ NUM_RCQ_BD);
/* SGE ring */
BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring),
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
index a1a5cdc..c07a6d0 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h
@@ -59,6 +59,16 @@ extern int int_mode;
(unsigned long long)(*y), x); \
} while (0)
+#define BNX2X_PCI_FALLOC(x, y, size) \
+ do { \
+ x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
+ if (x == NULL) \
+ goto alloc_mem_err; \
+ memset((void *)x, 0xFFFFFFFF, size); \
+ DP(NETIF_MSG_HW, "BNX2X_PCI_FALLOC: Physical %Lx Virtual %p\n",\
+ (unsigned long long)(*y), x); \
+ } while (0)
+
#define BNX2X_ALLOC(x, size) \
do { \
x = kzalloc(size, GFP_KERNEL); \
@@ -805,16 +815,18 @@ static inline bool bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
return false;
}
+#define BNX2X_IS_CQE_COMPLETED(cqe_fp) (cqe_fp->marker == 0x0)
+#define BNX2X_SEED_CQE(cqe_fp) (cqe_fp->marker = 0xFFFFFFFF)
static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
{
- u16 rx_cons_sb;
+ u16 cons;
+ union eth_rx_cqe *cqe;
+ struct eth_fast_path_rx_cqe *cqe_fp;
- /* Tell compiler that status block fields can change */
- barrier();
- rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
- if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
- rx_cons_sb++;
- return (fp->rx_comp_cons != rx_cons_sb);
+ cons = RCQ_BD(fp->rx_comp_cons);
+ cqe = &fp->rx_comp_ring[cons];
+ cqe_fp = &cqe->fast_path_cqe;
+ return BNX2X_IS_CQE_COMPLETED(cqe_fp);
}
/**
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 5ef3f96..5018e52 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -3818,7 +3818,8 @@ struct eth_fast_path_rx_cqe {
__le16 len_on_bd;
struct parsing_flags pars_flags;
union eth_sgl_or_raw_data sgl_or_raw_data;
- __le32 reserved1[8];
+ __le32 reserved1[7];
+ u32 marker;
};
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index e2e8705..f0d21fa 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -1866,7 +1866,6 @@ irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
mask = 0x2 << (fp->index + CNIC_SUPPORT(bp));
if (status & mask) {
/* Handle Rx or Tx according to SB id */
- prefetch(fp->rx_cons_sb);
for_each_cos_in_tx_queue(fp, cos)
prefetch(fp->txdata_ptr[cos]->tx_cons_sb);
prefetch(&fp->sb_running_index[SM_RX_ID]);
--
1.8.1.4
next prev parent reply other threads:[~2013-06-18 22:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-18 22:36 [PATCH v2 net-next 0/2] bnx2x: add support for low latency rx Dmitry Kravkov
2013-06-18 22:36 ` [PATCH v2 net-next 1/2] bnx2x: add support for ndo_ll_poll Dmitry Kravkov
2013-06-19 8:18 ` Eric Dumazet
2013-06-18 22:36 ` Dmitry Kravkov [this message]
2013-06-20 1:32 ` [PATCH v2 net-next 0/2] bnx2x: add support for low latency rx David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371594965-12546-3-git-send-email-dmitry@broadcom.com \
--to=dmitry@broadcom.com \
--cc=davem@davemloft.net \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).