From: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <sony.chacko@qlogic.com>,
<shahed.shaikh@qlogic.com>, <Dept_NX_Linux_NIC_Driver@qlogic.com>,
Pratik Pujar <pratik.pujar@qlogic.com>
Subject: [PATCH v2 net-next 6/8] qlcnic: Add support for 'set driver version' in 83XX
Date: Sat, 22 Jun 2013 04:12:05 -0400 [thread overview]
Message-ID: <1371888727-16422-7-git-send-email-jitendra.kalsaria@qlogic.com> (raw)
In-Reply-To: <1371888727-16422-1-git-send-email-jitendra.kalsaria@qlogic.com>
From: Pratik Pujar <pratik.pujar@qlogic.com>
Issue 'set driver version' during driver load and after reset recovery
to notify the driver version to the firmware.
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 5 ++-
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 9 +++++-
.../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 1 +
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 6 ++--
drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h | 3 +-
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 25 +++++++++++++------
6 files changed, 33 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
index 5694d59..955dd85 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
@@ -819,7 +819,7 @@ struct qlcnic_mac_list_s {
#define QLCNIC_FW_CAPABILITY_2_LRO_MAX_TCP_SEG BIT_2
#define QLCNIC_FW_CAP2_HW_LRO_IPV6 BIT_3
-#define QLCNIC_FW_CAPABILITY_2_OCBB BIT_5
+#define QLCNIC_FW_CAPABILITY_SET_DRV_VER BIT_5
#define QLCNIC_FW_CAPABILITY_2_BEACON BIT_7
/* module types */
@@ -1476,7 +1476,7 @@ int qlcnic_nic_del_mac(struct qlcnic_adapter *, const u8 *);
void qlcnic_82xx_free_mac_list(struct qlcnic_adapter *adapter);
int qlcnic_fw_cmd_set_mtu(struct qlcnic_adapter *adapter, int mtu);
-int qlcnic_fw_cmd_set_drv_version(struct qlcnic_adapter *);
+int qlcnic_fw_cmd_set_drv_version(struct qlcnic_adapter *, u32);
int qlcnic_change_mtu(struct net_device *netdev, int new_mtu);
netdev_features_t qlcnic_fix_features(struct net_device *netdev,
netdev_features_t features);
@@ -1500,6 +1500,7 @@ int qlcnic_validate_max_rss(struct qlcnic_adapter *, __u32);
void qlcnic_alloc_lb_filters_mem(struct qlcnic_adapter *adapter);
void qlcnic_82xx_set_mac_filter_count(struct qlcnic_adapter *);
int qlcnic_enable_msix(struct qlcnic_adapter *, u32);
+void qlcnic_set_drv_version(struct qlcnic_adapter *);
/* eSwitch management functions */
int qlcnic_config_switch_port(struct qlcnic_adapter *,
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
index 1c463dd..1938812 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -63,6 +63,7 @@ static const struct qlcnic_mailbox_metadata qlcnic_83xx_mbx_tbl[] = {
{QLCNIC_CMD_STOP_NIC_FUNC, 2, 1},
{QLCNIC_CMD_SET_LED_CONFIG, 5, 1},
{QLCNIC_CMD_GET_LED_CONFIG, 1, 5},
+ {QLCNIC_CMD_83XX_SET_DRV_VER, 4, 1},
{QLCNIC_CMD_ADD_RCV_RINGS, 130, 26},
{QLCNIC_CMD_CONFIG_VPORT, 4, 4},
{QLCNIC_CMD_BC_EVENT_SETUP, 2, 1},
@@ -2186,16 +2187,17 @@ int qlcnic_83xx_get_nic_info(struct qlcnic_adapter *adapter,
u32 temp;
u8 op = 0;
struct qlcnic_cmd_args cmd;
+ struct qlcnic_hardware_context *ahw = adapter->ahw;
err = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_GET_NIC_INFO);
if (err)
return err;
- if (func_id != adapter->ahw->pci_func) {
+ if (func_id != ahw->pci_func) {
temp = func_id << 16;
cmd.req.arg[1] = op | BIT_31 | temp;
} else {
- cmd.req.arg[1] = adapter->ahw->pci_func << 16;
+ cmd.req.arg[1] = ahw->pci_func << 16;
}
err = qlcnic_issue_cmd(adapter, &cmd);
if (err) {
@@ -2222,6 +2224,9 @@ int qlcnic_83xx_get_nic_info(struct qlcnic_adapter *adapter,
temp = (cmd.rsp.arg[8] & 0x7FFE0000) >> 17;
npar_info->max_linkspeed_reg_offset = temp;
}
+ if (npar_info->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS)
+ memcpy(ahw->extra_capability, &cmd.rsp.arg[16],
+ sizeof(ahw->extra_capability));
out:
qlcnic_free_mbx_args(&cmd);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index f073c08..e2d04d5 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -629,6 +629,7 @@ static int qlcnic_83xx_idc_reattach_driver(struct qlcnic_adapter *adapter)
return -EIO;
}
+ qlcnic_set_drv_version(adapter);
qlcnic_83xx_idc_attach_driver(adapter);
return 0;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index 72593a1..0d54fce 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -36,7 +36,7 @@ static const struct qlcnic_mailbox_metadata qlcnic_mbx_tbl[] = {
{QLCNIC_CMD_CONFIG_PORT, 4, 1},
{QLCNIC_CMD_TEMP_SIZE, 4, 4},
{QLCNIC_CMD_GET_TEMP_HDR, 4, 1},
- {QLCNIC_CMD_SET_DRV_VER, 4, 1},
+ {QLCNIC_CMD_82XX_SET_DRV_VER, 4, 1},
{QLCNIC_CMD_GET_LED_STATUS, 4, 2},
};
@@ -182,7 +182,7 @@ int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter,
return cmd->rsp.arg[0];
}
-int qlcnic_fw_cmd_set_drv_version(struct qlcnic_adapter *adapter)
+int qlcnic_fw_cmd_set_drv_version(struct qlcnic_adapter *adapter, u32 fw_cmd)
{
struct qlcnic_cmd_args cmd;
u32 arg1, arg2, arg3;
@@ -194,7 +194,7 @@ int qlcnic_fw_cmd_set_drv_version(struct qlcnic_adapter *adapter)
_QLCNIC_LINUX_MAJOR, _QLCNIC_LINUX_MINOR,
_QLCNIC_LINUX_SUBVERSION);
- err = qlcnic_alloc_mbx_args(&cmd, adapter, QLCNIC_CMD_SET_DRV_VER);
+ err = qlcnic_alloc_mbx_args(&cmd, adapter, fw_cmd);
if (err)
return err;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
index 812fd07..b190c84 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h
@@ -86,7 +86,7 @@ enum qlcnic_regs {
#define QLCNIC_CMD_BC_EVENT_SETUP 0x31
#define QLCNIC_CMD_CONFIG_VPORT 0x32
#define QLCNIC_CMD_GET_MAC_STATS 0x37
-#define QLCNIC_CMD_SET_DRV_VER 0x38
+#define QLCNIC_CMD_82XX_SET_DRV_VER 0x38
#define QLCNIC_CMD_GET_LED_STATUS 0x3C
#define QLCNIC_CMD_CONFIGURE_RSS 0x41
#define QLCNIC_CMD_CONFIG_INTR_COAL 0x43
@@ -103,6 +103,7 @@ enum qlcnic_regs {
#define QLCNIC_CMD_GET_LINK_STATUS 0x68
#define QLCNIC_CMD_SET_LED_CONFIG 0x69
#define QLCNIC_CMD_GET_LED_CONFIG 0x6A
+#define QLCNIC_CMD_83XX_SET_DRV_VER 0x6F
#define QLCNIC_CMD_ADD_RCV_RINGS 0x0B
#define QLCNIC_INTRPT_INTX 1
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 3963e78..0d7a4fd 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -1985,6 +1985,21 @@ int qlcnic_alloc_tx_rings(struct qlcnic_adapter *adapter,
return 0;
}
+void qlcnic_set_drv_version(struct qlcnic_adapter *adapter)
+{
+ struct qlcnic_hardware_context *ahw = adapter->ahw;
+ u32 fw_cmd = 0;
+
+ if (qlcnic_82xx_check(adapter))
+ fw_cmd = QLCNIC_CMD_82XX_SET_DRV_VER;
+ else if (qlcnic_83xx_check(adapter))
+ fw_cmd = QLCNIC_CMD_83XX_SET_DRV_VER;
+
+ if ((ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) &&
+ (ahw->extra_capability[0] & QLCNIC_FW_CAPABILITY_SET_DRV_VER))
+ qlcnic_fw_cmd_set_drv_version(adapter, fw_cmd);
+}
+
static int
qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
@@ -1992,7 +2007,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
struct qlcnic_adapter *adapter = NULL;
struct qlcnic_hardware_context *ahw;
int err, pci_using_dac = -1;
- u32 capab2;
char board_name[QLCNIC_MAX_BOARD_NAME_LEN + 19]; /* MAC + ": " + name */
if (pdev->is_virtfn)
@@ -2147,13 +2161,7 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (err)
goto err_out_disable_mbx_intr;
- if (qlcnic_82xx_check(adapter)) {
- if (ahw->capabilities & QLCNIC_FW_CAPABILITY_MORE_CAPS) {
- capab2 = QLCRD32(adapter, CRB_FW_CAPABILITIES_2);
- if (capab2 & QLCNIC_FW_CAPABILITY_2_OCBB)
- qlcnic_fw_cmd_set_drv_version(adapter);
- }
- }
+ qlcnic_set_drv_version(adapter);
pci_set_drvdata(pdev, adapter);
@@ -3124,6 +3132,7 @@ done:
adapter->fw_fail_cnt = 0;
adapter->flags &= ~QLCNIC_FW_HANG;
clear_bit(__QLCNIC_RESETTING, &adapter->state);
+ qlcnic_set_drv_version(adapter);
if (!qlcnic_clr_drv_state(adapter))
qlcnic_schedule_work(adapter, qlcnic_fw_poll_work,
--
1.7.1
next prev parent reply other threads:[~2013-06-22 8:53 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-22 8:11 [PATCH v2 net-next 0/8] qlcnic: Driver updates Jitendra Kalsaria
2013-06-22 8:12 ` [PATCH v2 net-next 1/8] qlcnic: Handle qlcnic_alloc_mbx_args() failure Jitendra Kalsaria
2013-06-22 8:12 ` [PATCH v2 net-next 2/8] qlcnic: Secondary unicast MAC address support Jitendra Kalsaria
2013-06-22 8:12 ` [PATCH v2 net-next 3/8] qlcnic: Minimize sleep duration within loopback diagnostic test Jitendra Kalsaria
2013-06-22 8:12 ` [PATCH v2 net-next 4/8] qlcnic: Add support for PEX DMA method to read memory section of adapter dump Jitendra Kalsaria
2013-06-22 8:12 ` [PATCH v2 net-next 5/8] qlcnic: Cleanup of structure qlcnic_hardware_context Jitendra Kalsaria
2013-06-22 10:53 ` Joe Perches
2013-06-24 18:17 ` Pratik Pujar
2013-06-24 18:19 ` Joe Perches
2013-06-25 5:04 ` Pratik Pujar
2013-06-22 8:12 ` Jitendra Kalsaria [this message]
2013-06-22 8:12 ` [PATCH v2 net-next 7/8] qlcnic: Add support for 83xx suspend and resume Jitendra Kalsaria
2013-06-22 8:12 ` [PATCH v2 net-next 8/8] qlcnic: Update version to 5.2.44 Jitendra Kalsaria
2013-06-24 1:30 ` [PATCH v2 net-next 0/8] qlcnic: Driver updates David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1371888727-16422-7-git-send-email-jitendra.kalsaria@qlogic.com \
--to=jitendra.kalsaria@qlogic.com \
--cc=Dept_NX_Linux_NIC_Driver@qlogic.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=pratik.pujar@qlogic.com \
--cc=shahed.shaikh@qlogic.com \
--cc=sony.chacko@qlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).