From: Lucas Stach <l.stach@pengutronix.de>
To: Jim Baxter <jim_baxter@mentor.com>
Cc: Duan Fugang-B38611 <B38611@freescale.com>,
"David S. Miller" <davem@davemloft.net>,
Li Frank-B20596 <B20596@freescale.com>,
Estevam Fabio-R49496 <r49496@freescale.com>,
Shawn Guo <shawn.guo@linaro.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
Ben Hutchings <bhutchings@solarflare.com>
Subject: Re: [PATCH net-next v1 1/1] net: fec: Add VLAN receive HW support.
Date: Thu, 27 Jun 2013 11:44:43 +0200 [thread overview]
Message-ID: <1372326283.4134.15.camel@weser.hi.pengutronix.de> (raw)
In-Reply-To: <51CAD44E.6030308@mentor.com>
Am Mittwoch, den 26.06.2013, 12:45 +0100 schrieb Jim Baxter:
> On 26/06/13 12:18, Duan Fugang-B38611 wrote:
> > On 06/26/13 18:09, Jim Baxter wrote:
> >
> >>> In addition,
> >>> 1. enet IP support hw VLAN detect such as imx28-fec, imx6q-fec and mvf600-fec, so you can add the "BD_ENET_RX_VLAN " to those platform driver_data.
> >> I have only tested it on the i.MX6, if someone wants to check it on the
> >> imx28 later they can add it to that option.
> >
> >>> 2. Enable the VLAN tag extraction with "NETIF_F_HW_VLAN_CTAG_RX" feature in .ndo_fix_features, which is configured by user.
> >> What do you mean by this, I am only enabling the VLAN code if (ndev->features & NETIF_F_HW_VLAN_CTAG_RX) is set. I am pretty sure this is set by
> >
> > You can enable the feature like below, which is reasonable.
> > .ndo_fix_features = fec_enet_fix_features
> >
> > static netdev_features_t fec_enet_fix_features (struct net_device *dev,
> > netdev_features_t features)
> > {
> > struct fec_enet_private *fep = netdev_priv(dev);
> > const struct platform_device_id *id_entry =
> > platform_get_device_id(fep->pdev);
> >
> > if (id_entry->driver_data & FEC_QUIRK_HAS_VLAN)
> > features |= NETIF_F_HW_VLAN_CTAG_RX;
> >
> > return features;
> > }
> >
> >
> > Thank you,
> > Andy
> >
> >
>
> I currently set the features in fec_enet_init() along with setting
> hw_features, is fec_enet_fix_features() a more correct design for driver
> implementation point?
>
I agree that VLAN tag extraction should not be enabled by default, but
at the users request. But according to the documentation there is no
need to implement the fix_features callback for this to work.
Just only set the hw_features on init, the networking core should take
care of never trying to enable a feature not found in there.
Regards,
Lucas
--
Pengutronix e.K. | Lucas Stach |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-5076 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2013-06-27 9:47 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <Jim Baxter <jim_baxter@mentor.com>
2013-04-17 20:07 ` [PATCH net-next v3 1/1] net: fec: Enable imx6 enet checksum acceleration Jim Baxter
2013-04-17 21:37 ` Eric Dumazet
2013-04-18 12:49 ` Jim Baxter
2013-04-18 16:16 ` Ben Hutchings
2013-04-18 17:07 ` Ben Hutchings
2013-04-18 17:08 ` Jim Baxter
2013-04-18 17:12 ` Ben Hutchings
2013-04-18 17:21 ` Jim Baxter
2013-04-18 21:27 ` Jim Baxter
2013-04-18 22:03 ` Ben Hutchings
2013-04-17 22:45 ` Francois Romieu
2013-04-18 10:18 ` Jim Baxter
2013-04-18 11:31 ` Fabio Estevam
2013-04-18 21:54 ` Francois Romieu
2013-04-19 8:45 ` Jim Baxter
2013-04-19 15:10 ` [PATCH net-next v4 " Jim Baxter
2013-04-19 15:29 ` Eric Dumazet
2013-04-19 15:55 ` Jim Baxter
2013-04-19 15:56 ` Ben Hutchings
2013-04-19 15:59 ` Eric Dumazet
2013-04-19 15:34 ` Ben Hutchings
2013-04-19 16:16 ` Jim Baxter
2013-04-19 16:20 ` Ben Hutchings
2013-04-19 18:10 ` [PATCH net-next v5 " Jim Baxter
2013-04-19 18:50 ` Ben Hutchings
2013-04-25 7:59 ` David Miller
2013-06-25 23:55 ` [PATCH net-next v1 1/1] net: fec: Add VLAN receive HW support Jim Baxter
2013-06-26 2:22 ` Duan Fugang-B38611
2013-06-26 2:31 ` Duan Fugang-B38611
2013-06-26 2:56 ` Shawn Guo
2013-06-26 3:13 ` Duan Fugang-B38611
2013-06-26 5:49 ` David Miller
2013-06-26 10:09 ` Jim Baxter
2013-06-26 11:18 ` Duan Fugang-B38611
2013-06-26 11:45 ` Jim Baxter
2013-06-27 1:41 ` Duan Fugang-B38611
2013-06-27 9:35 ` Jim Baxter
2013-06-27 9:44 ` Lucas Stach [this message]
2013-06-27 14:03 ` Jim Baxter
2013-06-27 18:25 ` [PATCH net v1 1/1] net: fec: Fix Transmitted bytes counter Jim Baxter
2013-06-28 2:11 ` Duan Fugang-B38611
2013-07-01 20:40 ` David Miller
2013-07-02 8:32 ` Jim Baxter
2013-07-02 8:46 ` David Miller
2013-06-28 9:51 ` [PATCH net v2 " Jim Baxter
2013-06-28 10:10 ` Duan Fugang-B38611
2013-06-28 14:08 ` [PATCH net-next v2 1/1] net: fec: Add VLAN receive HW support Jim Baxter
2013-06-29 5:34 ` Duan Fugang-B38611
2013-07-02 0:09 ` David Miller
2013-07-02 9:39 ` Jim Baxter
2013-06-28 15:07 ` [PATCH RFC net-next v1 1/1] net: fec: Fix RMON registers on imx6 Jim Baxter
2013-06-29 5:58 ` Duan Fugang-B38611
[not found] ` <CAFXsbZpgAqvkEy+S83iJNMH9-N7h68MDRuvARE9pmT7HbcpAOQ@mail.gmail.com>
[not found] ` <CAFXsbZoBQ3ODUnFg-VumP+YAfCJ2-d=nL_=Gk2LKXm7PadHUuQ@mail.gmail.com>
2013-07-01 10:16 ` Jim Baxter
2013-07-01 10:31 ` [PATCH " Jim Baxter
[not found] ` <CAFXsbZoDWn4KgAVEpUtajo+PwfnrJoO0eTw9g6+MdQ8b666=EQ@mail.gmail.com>
2013-07-01 13:52 ` Jim Baxter
2013-07-02 19:41 ` David Miller
2013-07-01 13:57 ` [PATCH net-next v3 " Jim Baxter
2013-07-02 21:52 ` [PATCH net-next v3 1/1] net: fec: Add VLAN receive HW support Jim Baxter
2013-07-03 23:45 ` David Miller
2014-05-29 17:12 ` [PATCH v1 0/3] usb: gadget: NCM: Fixes and Multi-frame for TX Jim Baxter
2014-05-29 17:12 ` [PATCH v1 1/3] usb: gadget: NCM: RX function support multiple NDPs Jim Baxter
2014-05-29 18:55 ` Bjørn Mork
2014-05-30 11:45 ` Jim Baxter
2014-05-29 17:12 ` [PATCH v1 2/3] usb: gadget: NCM: Add transmit multi-frame Jim Baxter
2014-05-29 17:12 ` [PATCH v1 3/3] usb: gadget: NCM: Stop RX TCP Bursts getting dropped Jim Baxter
2014-05-29 19:04 ` Eric Dumazet
2014-05-30 11:25 ` Jim Baxter
2014-06-12 9:38 ` Jim Baxter
2014-06-12 9:42 ` David Laight
2014-07-07 17:33 ` [PATCH v2 0/3] usb: gadget: NCM: Fixes and Multi-frame for TX Jim Baxter
2014-07-07 17:33 ` [PATCH v2 1/3] usb: gadget: NCM: RX function support multiple NDPs Jim Baxter
2014-07-07 17:33 ` [PATCH v2 2/3] usb: gadget: NCM: Add transmit multi-frame Jim Baxter
2014-07-07 17:33 ` [PATCH v2 3/3] usb: gadget: NCM: Stop RX TCP Bursts getting dropped Jim Baxter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372326283.4134.15.camel@weser.hi.pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=B20596@freescale.com \
--cc=B38611@freescale.com \
--cc=bhutchings@solarflare.com \
--cc=davem@davemloft.net \
--cc=jim_baxter@mentor.com \
--cc=netdev@vger.kernel.org \
--cc=r49496@freescale.com \
--cc=shawn.guo@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).