From: Daniel Borkmann <dborkman@redhat.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-sctp@vger.kernel.org,
Vlad Yasevich <vyasevich@gmail.com>,
Neil Horman <nhorman@tuxdriver.com>
Subject: [PATCH net-next] net: sctp: get rid of SCTP_DBG_TSNS entirely
Date: Mon, 1 Jul 2013 11:31:36 +0200 [thread overview]
Message-ID: <1372671096-27129-1-git-send-email-dborkman@redhat.com> (raw)
After having reworked the debugging framework, Neil and Vlad agreed to
get rid of the leftover SCTP_DBG_TSNS code for a couple of reasons:
We can use systemtap scripts to investigate these things, we now have
pr_debug() helpers that make life easier, and if we really need anything
else besides those tools, we will be forced to come up with something
better than we have there. Therefore, get rid of this ifdef debugging
code entirely for now.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
CC: Vlad Yasevich <vyasevich@gmail.com>
CC: Neil Horman <nhorman@tuxdriver.com>
---
On top of [PATCH net-next v4 0/2] Rework SCTP debugging framework.
net/sctp/Kconfig | 9 -----
net/sctp/outqueue.c | 105 ----------------------------------------------------
2 files changed, 114 deletions(-)
diff --git a/net/sctp/Kconfig b/net/sctp/Kconfig
index d80bf1a..71c1a59 100644
--- a/net/sctp/Kconfig
+++ b/net/sctp/Kconfig
@@ -49,15 +49,6 @@ config NET_SCTPPROBE
To compile this code as a module, choose M here: the
module will be called sctp_probe.
-config SCTP_DBG_TSNS
- bool "SCTP: Debug transactions"
- help
- If you say Y, this will enable transaction debugging, visible
- from the kernel's dynamic debugging framework.
-
- If unsure, say N. However, if you are running into problems, use
- this option to gather outqueue trace information.
-
config SCTP_DBG_OBJCNT
bool "SCTP: Debug object counts"
depends on PROC_FS
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 511b3b3..cb80a8e 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -1335,21 +1335,6 @@ static void sctp_check_transmitted(struct sctp_outq *q,
int bytes_acked = 0;
int migrate_bytes = 0;
- /* These state variables are for coherent debug output. --xguo */
-
-#ifdef CONFIG_SCTP_DBG_TSNS
- __u32 dbg_ack_tsn = 0; /* An ACKed TSN range starts here... */
- __u32 dbg_last_ack_tsn = 0; /* ...and finishes here. */
- __u32 dbg_kept_tsn = 0; /* An un-ACKed range starts here... */
- __u32 dbg_last_kept_tsn = 0; /* ...and finishes here. */
-
- /* 0 : The last TSN was ACKed.
- * 1 : The last TSN was NOT ACKed (i.e. KEPT).
- * -1: We need to initialize.
- */
- int dbg_prt_state = -1;
-#endif /* CONFIG_SCTP_DBG_TSNS */
-
sack_ctsn = ntohl(sack->cum_tsn_ack);
INIT_LIST_HEAD(&tlist);
@@ -1471,49 +1456,6 @@ static void sctp_check_transmitted(struct sctp_outq *q,
*/
list_add_tail(lchunk, &tlist);
}
-
-#ifdef CONFIG_SCTP_DBG_TSNS
- switch (dbg_prt_state) {
- case 0: /* last TSN was ACKed */
- if (dbg_last_ack_tsn + 1 == tsn) {
- /* This TSN belongs to the
- * current ACK range.
- */
- break;
- }
-
- if (dbg_last_ack_tsn != dbg_ack_tsn) {
- /* Display the end of the
- * current range.
- */
- pr_cont("-%08x", dbg_last_ack_tsn);
- }
-
- /* Start a new range. */
- pr_cont(",%08x", tsn);
- dbg_ack_tsn = tsn;
- break;
-
- case 1: /* The last TSN was NOT ACKed. */
- if (dbg_last_kept_tsn != dbg_kept_tsn) {
- /* Display the end of current range. */
- pr_cont("-%08x", dbg_last_kept_tsn);
- }
-
- pr_cont("\n");
- /* FALL THROUGH... */
- default:
- /* This is the first-ever TSN we examined. */
- /* Start a new range of ACK-ed TSNs. */
- pr_debug("ACKed: %08x", tsn);
-
- dbg_prt_state = 0;
- dbg_ack_tsn = tsn;
- }
-
- dbg_last_ack_tsn = tsn;
-#endif /* CONFIG_SCTP_DBG_TSNS */
-
} else {
if (tchunk->tsn_gap_acked) {
pr_debug("%s: receiver reneged on data TSN:0x%x\n",
@@ -1537,56 +1479,9 @@ static void sctp_check_transmitted(struct sctp_outq *q,
}
list_add_tail(lchunk, &tlist);
-
-#ifdef CONFIG_SCTP_DBG_TSNS
- /* See the above comments on ACK-ed TSNs. */
- switch (dbg_prt_state) {
- case 1:
- if (dbg_last_kept_tsn + 1 == tsn)
- break;
-
- if (dbg_last_kept_tsn != dbg_kept_tsn)
- pr_cont("-%08x", dbg_last_kept_tsn);
-
- pr_cont(",%08x", tsn);
- dbg_kept_tsn = tsn;
- break;
-
- case 0:
- if (dbg_last_ack_tsn != dbg_ack_tsn)
- pr_cont("-%08x", dbg_last_ack_tsn);
-
- pr_cont("\n");
- /* FALL THROUGH... */
- default:
- pr_debug("KEPT: %08x", tsn);
-
- dbg_prt_state = 1;
- dbg_kept_tsn = tsn;
- }
-
- dbg_last_kept_tsn = tsn;
-#endif /* CONFIG_SCTP_DBG_TSNS */
}
}
-#ifdef CONFIG_SCTP_DBG_TSNS
- /* Finish off the last range, displaying its ending TSN. */
- switch (dbg_prt_state) {
- case 0:
- if (dbg_last_ack_tsn != dbg_ack_tsn)
- pr_cont("-%08x\n", dbg_last_ack_tsn);
- else
- pr_cont("\n");
- break;
- case 1:
- if (dbg_last_kept_tsn != dbg_kept_tsn)
- pr_cont("-%08x\n", dbg_last_kept_tsn);
- else
- pr_cont("\n");
- break;
- }
-#endif /* CONFIG_SCTP_DBG_TSNS */
if (transport) {
if (bytes_acked) {
struct sctp_association *asoc = transport->asoc;
--
1.7.11.7
next reply other threads:[~2013-07-01 9:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 9:31 Daniel Borkmann [this message]
2013-07-01 11:33 ` [PATCH net-next] net: sctp: get rid of SCTP_DBG_TSNS entirely Neil Horman
2013-07-01 16:33 ` Daniel Borkmann
2013-07-01 20:49 ` Neil Horman
2013-07-01 15:35 ` Vlad Yasevich
2013-07-02 7:08 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372671096-27129-1-git-send-email-dborkman@redhat.com \
--to=dborkman@redhat.com \
--cc=davem@davemloft.net \
--cc=linux-sctp@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=vyasevich@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).