From: "Rafał Miłecki" <zajec5@gmail.com>
To: netdev@vger.kernel.org, openwrt-devel@lists.openwrt.org,
Hauke Mehrtens <hauke@hauke-m.de>,
Florian Fainelli <f.fainelli@gmail.com>,
Jonas Gorski <jogo@openwrt.org>,
Robert Bradley <robert.bradley1@gmail.com>
Subject: [RFC][PATCH 1/2] bgmac: separate RX desc setup code into new function
Date: Sun, 11 Aug 2013 19:49:14 +0200 [thread overview]
Message-ID: <1376243355-5740-1-git-send-email-zajec5@gmail.com> (raw)
---
drivers/net/ethernet/broadcom/bgmac.c | 41 ++++++++++++++++++---------------
1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index 1b8e7a3..e70ee43 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -268,6 +268,26 @@ static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac,
return 0;
}
+static void bgmac_dma_rx_setup_desc(struct bgmac *bgmac,
+ struct bgmac_dma_ring *ring, int desc_idx)
+{
+ struct bgmac_dma_desc *dma_desc = ring->cpu_base + desc_idx;
+ u32 ctl0 = 0, ctl1 = 0;
+
+ if (desc_idx == ring->num_slots - 1)
+ ctl0 |= BGMAC_DESC_CTL0_EOT;
+ ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
+ /* Is there any BGMAC device that requires extension? */
+ /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) &
+ * B43_DMA64_DCTL1_ADDREXT_MASK;
+ */
+
+ dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[desc_idx].dma_addr));
+ dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[desc_idx].dma_addr));
+ dma_desc->ctl0 = cpu_to_le32(ctl0);
+ dma_desc->ctl1 = cpu_to_le32(ctl1);
+}
+
static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
int weight)
{
@@ -484,8 +504,6 @@ err_dma_free:
static void bgmac_dma_init(struct bgmac *bgmac)
{
struct bgmac_dma_ring *ring;
- struct bgmac_dma_desc *dma_desc;
- u32 ctl0, ctl1;
int i;
for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
@@ -514,23 +532,8 @@ static void bgmac_dma_init(struct bgmac *bgmac)
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI,
upper_32_bits(ring->dma_base));
- for (j = 0, dma_desc = ring->cpu_base; j < ring->num_slots;
- j++, dma_desc++) {
- ctl0 = ctl1 = 0;
-
- if (j == ring->num_slots - 1)
- ctl0 |= BGMAC_DESC_CTL0_EOT;
- ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
- /* Is there any BGMAC device that requires extension? */
- /* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) &
- * B43_DMA64_DCTL1_ADDREXT_MASK;
- */
-
- dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[j].dma_addr));
- dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[j].dma_addr));
- dma_desc->ctl0 = cpu_to_le32(ctl0);
- dma_desc->ctl1 = cpu_to_le32(ctl1);
- }
+ for (j = 0; j < ring->num_slots; j++)
+ bgmac_dma_rx_setup_desc(bgmac, ring, j);
bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
ring->num_slots * sizeof(struct bgmac_dma_desc));
--
1.7.10.4
next reply other threads:[~2013-08-11 17:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-11 17:49 Rafał Miłecki [this message]
2013-08-11 17:49 ` [RFC][PATCH 2/2] bgmac: pass received packet to the netif instead of copying it Rafał Miłecki
2013-08-15 11:36 ` Rafał Miłecki
2013-08-15 11:47 ` Felix Fietkau
2013-08-15 20:21 ` Rafał Miłecki
2013-08-18 21:06 ` [OpenWrt-Devel] " Rafał Miłecki
2013-08-19 4:36 ` Felix Fietkau
2013-08-19 17:20 ` Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376243355-5740-1-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=hauke@hauke-m.de \
--cc=jogo@openwrt.org \
--cc=netdev@vger.kernel.org \
--cc=openwrt-devel@lists.openwrt.org \
--cc=robert.bradley1@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).