Netdev List
 help / color / mirror / Atom feed
From: Pravin B Shelar <pshelar@nicira.com>
To: netdev@vger.kernel.org, davem@davemloft.net
Cc: stephen@networkplumber.org, Pravin B Shelar <pshelar@nicira.com>
Subject: [PATCH net-next v7 2/8] vxlan: Restructure vxlan receive.
Date: Mon, 19 Aug 2013 11:22:54 -0700	[thread overview]
Message-ID: <1376936574-25517-1-git-send-email-pshelar@nicira.com> (raw)

Use iptunnel_pull_header() for better code sharing.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
---
v5-v6:
split from second patch from v5 series.
---
 drivers/net/vxlan.c |   22 +++++++---------------
 1 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index b784ee6..1afb979 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -57,6 +57,7 @@
 #define VXLAN_VID_MASK	(VXLAN_N_VID - 1)
 /* IP header + UDP + VXLAN + Ethernet header */
 #define VXLAN_HEADROOM (20 + 8 + 8 + 14)
+#define VXLAN_HLEN (sizeof(struct udphdr) + sizeof(struct vxlanhdr))
 
 #define VXLAN_FLAGS 0x08000000	/* struct vxlanhdr.vx_flags required value. */
 
@@ -868,15 +869,12 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 	__u32 vni;
 	int err;
 
-	/* pop off outer UDP header */
-	__skb_pull(skb, sizeof(struct udphdr));
-
 	/* Need Vxlan and inner Ethernet header to be present */
-	if (!pskb_may_pull(skb, sizeof(struct vxlanhdr)))
+	if (!pskb_may_pull(skb, VXLAN_HLEN))
 		goto error;
 
-	/* Drop packets with reserved bits set */
-	vxh = (struct vxlanhdr *) skb->data;
+	/* Return packets with reserved bits set */
+	vxh = (struct vxlanhdr *)(udp_hdr(skb) + 1);
 	if (vxh->vx_flags != htonl(VXLAN_FLAGS) ||
 	    (vxh->vx_vni & htonl(0xff))) {
 		netdev_dbg(skb->dev, "invalid vxlan flags=%#x vni=%#x\n",
@@ -884,8 +882,6 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 		goto error;
 	}
 
-	__skb_pull(skb, sizeof(struct vxlanhdr));
-
 	/* Is this VNI defined? */
 	vni = ntohl(vxh->vx_vni) >> 8;
 	port = inet_sk(sk)->inet_sport;
@@ -896,7 +892,7 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 		goto drop;
 	}
 
-	if (!pskb_may_pull(skb, ETH_HLEN)) {
+	if (iptunnel_pull_header(skb, VXLAN_HLEN, htons(ETH_P_TEB))) {
 		vxlan->dev->stats.rx_length_errors++;
 		vxlan->dev->stats.rx_errors++;
 		goto drop;
@@ -904,8 +900,6 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 
 	skb_reset_mac_header(skb);
 
-	/* Re-examine inner Ethernet packet */
-	oip = ip_hdr(skb);
 	skb->protocol = eth_type_trans(skb, vxlan->dev);
 
 	/* Ignore packet loops (and multicast echo) */
@@ -913,11 +907,12 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 			       vxlan->dev->dev_addr) == 0)
 		goto drop;
 
+	/* Re-examine inner Ethernet packet */
+	oip = ip_hdr(skb);
 	if ((vxlan->flags & VXLAN_F_LEARN) &&
 	    vxlan_snoop(skb->dev, oip->saddr, eth_hdr(skb)->h_source))
 		goto drop;
 
-	__skb_tunnel_rx(skb, vxlan->dev);
 	skb_reset_network_header(skb);
 
 	/* If the NIC driver gave us an encapsulated packet with
@@ -953,9 +948,6 @@ static int vxlan_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
 
 	return 0;
 error:
-	/* Put UDP header back */
-	__skb_push(skb, sizeof(struct udphdr));
-
 	return 1;
 drop:
 	/* Consume bad packet */
-- 
1.7.1

             reply	other threads:[~2013-08-19 18:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-19 18:22 Pravin B Shelar [this message]
  -- strict thread matches above, loose matches on Subject: below --
2013-08-05 17:47 [PATCH net-next v7 2/8] vxlan: Restructure vxlan receive Pravin B Shelar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1376936574-25517-1-git-send-email-pshelar@nicira.com \
    --to=pshelar@nicira.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox