netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robherring2@gmail.com>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andreas Herrmann <andreas.herrmann@calxeda.com>,
	Lennert Buytenhek <buytenh@wantstofly.org>,
	Rob Herring <rob.herring@calxeda.com>
Subject: [PATCH 10/11] net: calxedaxgmac: fix rx DMA mapping API size mismatches
Date: Mon, 26 Aug 2013 17:45:25 -0500	[thread overview]
Message-ID: <1377557126-10716-10-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1377557126-10716-1-git-send-email-robherring2@gmail.com>

From: Rob Herring <rob.herring@calxeda.com>

Fix the mismatch in the DMA mapping and unmapping sizes for receive. The
unmap size must be equal to the map size and should not be the actual
received frame length. The map size should also be adjusted by the
NET_IP_ALIGN size since the h/w buffer size (dma_buf_sz) includes this
offset.

Also, add a missing dma_mapping_error check in xgmac_rx_refill.

Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
 drivers/net/ethernet/calxeda/xgmac.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index b206268..f149c08 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -695,9 +695,14 @@ static void xgmac_rx_refill(struct xgmac_priv *priv)
 			if (unlikely(skb == NULL))
 				break;
 
-			priv->rx_skbuff[entry] = skb;
 			paddr = dma_map_single(priv->device, skb->data,
-					       bufsz, DMA_FROM_DEVICE);
+					       priv->dma_buf_sz - NET_IP_ALIGN,
+					       DMA_FROM_DEVICE);
+			if (dma_mapping_error(priv->device, paddr)) {
+				dev_kfree_skb_any(skb);
+				break;
+			}
+			priv->rx_skbuff[entry] = skb;
 			desc_set_buf_addr(p, paddr, priv->dma_buf_sz);
 		}
 
@@ -794,13 +799,14 @@ static void xgmac_free_rx_skbufs(struct xgmac_priv *priv)
 		return;
 
 	for (i = 0; i < DMA_RX_RING_SZ; i++) {
-		if (priv->rx_skbuff[i] == NULL)
+		struct sk_buff *skb = priv->rx_skbuff[i];
+		if (skb == NULL)
 			continue;
 
 		p = priv->dma_rx + i;
 		dma_unmap_single(priv->device, desc_get_buf_addr(p),
-				 priv->dma_buf_sz, DMA_FROM_DEVICE);
-		dev_kfree_skb_any(priv->rx_skbuff[i]);
+				 priv->dma_buf_sz - NET_IP_ALIGN, DMA_FROM_DEVICE);
+		dev_kfree_skb_any(skb);
 		priv->rx_skbuff[i] = NULL;
 	}
 }
@@ -1190,7 +1196,7 @@ static int xgmac_rx(struct xgmac_priv *priv, int limit)
 
 		skb_put(skb, frame_len);
 		dma_unmap_single(priv->device, desc_get_buf_addr(p),
-				 frame_len, DMA_FROM_DEVICE);
+				 priv->dma_buf_sz - NET_IP_ALIGN, DMA_FROM_DEVICE);
 
 		skb->protocol = eth_type_trans(skb, priv->dev);
 		skb->ip_summed = ip_checksum;
-- 
1.8.1.2

  parent reply	other threads:[~2013-08-26 22:45 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-26 22:45 [PATCH 01/11] net: calxedaxgmac: remove NETIF_F_FRAGLIST setting Rob Herring
2013-08-26 22:45 ` [PATCH 02/11] net: calxedaxgmac: read correct field in xgmac_desc_get_buf_len Rob Herring
2013-08-26 22:45 ` [PATCH 03/11] net: calxedaxgmac: fix race between xgmac_tx_complete and xgmac_tx_err Rob Herring
2013-08-26 22:45 ` [PATCH 04/11] net: calxedaxgmac: fix possible skb free before tx complete Rob Herring
2013-08-26 22:45 ` [PATCH 05/11] net: calxedaxgmac: update ring buffer tx_head after barriers Rob Herring
2013-08-26 22:45 ` [PATCH 06/11] net: calxedaxgmac: fix race with tx queue stop/wake Rob Herring
2013-08-27 18:31   ` Ben Hutchings
2013-08-26 22:45 ` [PATCH 07/11] net: calxedaxgmac: enable interrupts after napi_enable Rob Herring
2013-08-26 22:45 ` [PATCH 08/11] net: calxedaxgmac: fix various errors in xgmac_set_rx_mode Rob Herring
2013-08-26 22:45 ` [PATCH 09/11] net: calxedaxgmac: remove some unused statistic counters Rob Herring
2013-08-26 22:45 ` Rob Herring [this message]
2013-08-26 22:45 ` [PATCH 11/11] net: calxedaxgmac: fix xgmac_xmit DMA mapping error handling Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1377557126-10716-10-git-send-email-robherring2@gmail.com \
    --to=robherring2@gmail.com \
    --cc=andreas.herrmann@calxeda.com \
    --cc=buytenh@wantstofly.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rob.herring@calxeda.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).