netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sonic Zhang <sonic.adi@gmail.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>, <netdev@vger.kernel.org>
Cc: <adi-buildroot-devel@lists.sourceforge.net>,
	Sonic Zhang <sonic.zhang@analog.com>
Subject: [PATCH v4][for net-next] driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.
Date: Wed, 28 Aug 2013 18:40:58 +0800	[thread overview]
Message-ID: <1377686458-9943-1-git-send-email-sonic.adi@gmail.com> (raw)

From: Sonic Zhang <sonic.zhang@analog.com>

Some synopsys ip implementation doesn't support DMA store and forward mode,
such as BF60x. So, set force_thresh_dma_mode to use DMA thresholds only.
Update document and devicetree as well.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
---
 Documentation/devicetree/bindings/net/stmmac.txt      | 5 +++++
 Documentation/networking/stmmac.txt                   | 3 +++
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c     | 4 +++-
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +++
 include/linux/stmmac.h                                | 1 +
 5 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index 261c563..eba0e5e 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -22,6 +22,11 @@ Required properties:
 - snps,pbl		Programmable Burst Length
 - snps,fixed-burst	Program the DMA to use the fixed burst mode
 - snps,mixed-burst	Program the DMA to use the mixed burst mode
+- snps,force_thresh_dma_mode	Force DMA to use the threshold mode for
+				both tx and rx
+- snps,force_sf_dma_mode	Force DMA to use the Store and Forward
+				mode for both tx and rx. This flag is
+				ignored if force_thresh_dma_mode is set.
 
 Optional properties:
 - mac-address: 6 bytes, mac address
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 654d2e5..457b8bb 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -123,6 +123,7 @@ struct plat_stmmacenet_data {
 	int bugged_jumbo;
 	int pmt;
 	int force_sf_dma_mode;
+	int force_thresh_dma_mode;
 	int riwt_off;
 	void (*fix_mac_speed)(void *priv, unsigned int speed);
 	void (*bus_setup)(void __iomem *ioaddr);
@@ -159,6 +160,8 @@ Where:
  o pmt: core has the embedded power module (optional).
  o force_sf_dma_mode: force DMA to use the Store and Forward mode
 		     instead of the Threshold.
+ o force_thresh_dma_mode: force DMA to use the Shreshold mode other than
+		     the Store and Forward mode.
  o riwt_off: force to disable the RX watchdog feature and switch to NAPI mode.
  o fix_mac_speed: this callback is used for modifying some syscfg registers
 		 (on ST SoCs) according to the link speed negotiated by the
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index be40691..8d4ccd3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1224,7 +1224,9 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
  */
 static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 {
-	if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
+	if (priv->plat->force_thresh_dma_mode)
+		priv->hw->dma->dma_mode(priv->ioaddr, tc, tc);
+	else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
 		/*
 		 * In case of GMAC, SF mode can be enabled
 		 * to perform the TX COE in HW. This depends on:
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index da8be6e..865c944 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -79,6 +79,9 @@ static int stmmac_probe_config_dt(struct platform_device *pdev,
 	of_property_read_u32(np, "snps,pbl", &dma_cfg->pbl);
 	dma_cfg->fixed_burst = of_property_read_bool(np, "snps,fixed-burst");
 	dma_cfg->mixed_burst = of_property_read_bool(np, "snps,mixed-burst");
+	plat->force_thresh_dma_mode = of_property_read_bool(np, "snps,force_thresh_dma_mode");
+	if (plat->force_thresh_dma_mode)
+		plat->force_sf_dma_mode = 0;
 
 	return 0;
 }
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 9e495d31..bb5deb0 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -108,6 +108,7 @@ struct plat_stmmacenet_data {
 	int bugged_jumbo;
 	int pmt;
 	int force_sf_dma_mode;
+	int force_thresh_dma_mode;
 	int riwt_off;
 	void (*fix_mac_speed)(void *priv, unsigned int speed);
 	void (*bus_setup)(void __iomem *ioaddr);
-- 
1.8.2.3

             reply	other threads:[~2013-08-28 10:34 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-28 10:40 Sonic Zhang [this message]
2013-08-28 10:39 ` [PATCH v4][for net-next] driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set Giuseppe CAVALLARO

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1377686458-9943-1-git-send-email-sonic.adi@gmail.com \
    --to=sonic.adi@gmail.com \
    --cc=adi-buildroot-devel@lists.sourceforge.net \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=sonic.zhang@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).