From: Cong Wang <amwang@redhat.com>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Pravin Shelar <pshelar@nicira.com>, Cong Wang <amwang@redhat.com>
Subject: [PATCH net-next v11 11/11] net: unify skb_udp_tunnel_segment() and skb_udp6_tunnel_segment()
Date: Sat, 31 Aug 2013 11:07:28 +0800 [thread overview]
Message-ID: <1377918448-29888-12-git-send-email-amwang@redhat.com> (raw)
In-Reply-To: <1377918448-29888-1-git-send-email-amwang@redhat.com>
From: Cong Wang <amwang@redhat.com>
As suggested by Pravin, we can unify the code in case of duplicated
code.
Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
---
net/ipv4/udp.c | 13 ++++++++++-
net/ipv6/udp_offload.c | 56 +-----------------------------------------------
2 files changed, 13 insertions(+), 56 deletions(-)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 0b24508..74d2c95 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2337,7 +2337,7 @@ struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb,
uh->len = htons(skb->len - udp_offset);
/* csum segment if tunnel sets skb with csum. */
- if (unlikely(uh->check)) {
+ if (protocol == htons(ETH_P_IP) && unlikely(uh->check)) {
struct iphdr *iph = ip_hdr(skb);
uh->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
@@ -2348,7 +2348,18 @@ struct sk_buff *skb_udp_tunnel_segment(struct sk_buff *skb,
if (uh->check == 0)
uh->check = CSUM_MANGLED_0;
+ } else if (protocol == htons(ETH_P_IPV6)) {
+ struct ipv6hdr *ipv6h = ipv6_hdr(skb);
+ u32 len = skb->len - udp_offset;
+
+ uh->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr,
+ len, IPPROTO_UDP, 0);
+ uh->check = csum_fold(skb_checksum(skb, udp_offset, len, 0));
+ if (uh->check == 0)
+ uh->check = CSUM_MANGLED_0;
+ skb->ip_summed = CHECKSUM_NONE;
}
+
skb->protocol = protocol;
} while ((skb = skb->next));
out:
diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c
index 7e5e5ac..6055951 100644
--- a/net/ipv6/udp_offload.c
+++ b/net/ipv6/udp_offload.c
@@ -38,60 +38,6 @@ static int udp6_ufo_send_check(struct sk_buff *skb)
return 0;
}
-static struct sk_buff *skb_udp6_tunnel_segment(struct sk_buff *skb,
- netdev_features_t features)
-{
- struct sk_buff *segs = ERR_PTR(-EINVAL);
- int mac_len = skb->mac_len;
- int tnl_hlen = skb_inner_mac_header(skb) - skb_transport_header(skb);
- int outer_hlen;
- netdev_features_t enc_features;
-
- if (unlikely(!pskb_may_pull(skb, tnl_hlen)))
- goto out;
-
- skb->encapsulation = 0;
- __skb_pull(skb, tnl_hlen);
- skb_reset_mac_header(skb);
- skb_set_network_header(skb, skb_inner_network_offset(skb));
- skb->mac_len = skb_inner_network_offset(skb);
-
- /* segment inner packet. */
- enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
- segs = skb_mac_gso_segment(skb, enc_features);
- if (!segs || IS_ERR(segs))
- goto out;
-
- outer_hlen = skb_tnl_header_len(skb);
- skb = segs;
- do {
- struct udphdr *uh;
- struct ipv6hdr *ipv6h;
- int udp_offset = outer_hlen - tnl_hlen;
- u32 len;
-
- skb->mac_len = mac_len;
-
- skb_push(skb, outer_hlen);
- skb_reset_mac_header(skb);
- skb_set_network_header(skb, mac_len);
- skb_set_transport_header(skb, udp_offset);
- uh = udp_hdr(skb);
- uh->len = htons(skb->len - udp_offset);
- ipv6h = ipv6_hdr(skb);
- len = skb->len - udp_offset;
-
- uh->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr,
- len, IPPROTO_UDP, 0);
- uh->check = csum_fold(skb_checksum(skb, udp_offset, len, 0));
- if (uh->check == 0)
- uh->check = CSUM_MANGLED_0;
- skb->ip_summed = CHECKSUM_NONE;
- } while ((skb = skb->next));
-out:
- return segs;
-}
-
static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
netdev_features_t features)
{
@@ -129,7 +75,7 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
}
if (skb->encapsulation && skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL)
- segs = skb_udp6_tunnel_segment(skb, features);
+ segs = skb_udp_tunnel_segment(skb, features);
else {
/* Do software UFO. Complete and fill in the UDP checksum as HW cannot
* do checksum of UDP packets sent as multiple IP fragments.
--
1.7.7.6
prev parent reply other threads:[~2013-08-31 3:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-31 3:07 [PATCH net-next v11 00/11] vxlan: add ipv6 support Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 01/11] ipv6: move ip6_dst_hoplimit() into core kernel Cong Wang
2013-08-31 4:59 ` David Miller
2013-08-31 5:07 ` Cong Wang
2013-08-31 5:56 ` David Miller
2013-08-31 3:07 ` [PATCH net-next v11 02/11] ipv6: move ip6_local_out " Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 03/11] ipv6: export a stub for IPv6 symbols used by vxlan Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 04/11] ipv6: export in6addr_loopback to modules Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 05/11] ipv6: do not call ndisc_send_rs() with write lock Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 06/11] vxlan: add ipv6 support Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 07/11] vxlan: add ipv6 route short circuit support Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 08/11] ipv6: move in6_dev_finish_destroy() into core kernel Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 09/11] vxlan: add ipv6 proxy support Cong Wang
2013-08-31 3:07 ` [PATCH net-next v11 10/11] ipv6: Add generic UDP Tunnel segmentation Cong Wang
2013-08-31 3:07 ` Cong Wang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377918448-29888-12-git-send-email-amwang@redhat.com \
--to=amwang@redhat.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=pshelar@nicira.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).