From: Veaceslav Falico <vfalico@redhat.com>
To: netdev@vger.kernel.org
Cc: Veaceslav Falico <vfalico@redhat.com>,
Jay Vosburgh <fubar@us.ibm.com>,
Andy Gospodarek <andy@greyhouse.net>
Subject: [PATCH RFC net-next 15/21] bonding: use neighbour list for bond_for_each_slave_continue()
Date: Mon, 2 Sep 2013 23:39:19 +0200 [thread overview]
Message-ID: <1378157965-17537-16-git-send-email-vfalico@redhat.com> (raw)
In-Reply-To: <1378157965-17537-1-git-send-email-vfalico@redhat.com>
Use netdev_for_each_lower_neigh_private_continue() macro to iterate through
bonding slaves. It needs a struct list_head *, so add where needed.
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
---
drivers/net/bonding/bond_3ad.c | 3 +--
drivers/net/bonding/bond_alb.c | 4 ++--
drivers/net/bonding/bond_main.c | 8 ++++----
drivers/net/bonding/bonding.h | 7 +++----
4 files changed, 10 insertions(+), 12 deletions(-)
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 7430cbb..325ce90 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2423,7 +2423,6 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
int slave_agg_no;
int slaves_in_agg;
int agg_id;
- int i;
struct ad_info ad_info;
int res = 1;
@@ -2463,7 +2462,7 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
start_at = slave;
- bond_for_each_slave_from(bond, slave, i, start_at) {
+ bond_for_each_slave_from(bond, slave, iter, start_at) {
int slave_agg_id = 0;
struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator;
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 738eeae..9633ca2 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -384,7 +384,7 @@ static struct slave *rlb_next_rx_slave(struct bonding *bond)
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
struct slave *rx_slave, *slave, *start_at;
- int i = 0;
+ struct list_head *iter;
if (bond_info->next_rx_slave)
start_at = bond_info->next_rx_slave;
@@ -393,7 +393,7 @@ static struct slave *rlb_next_rx_slave(struct bonding *bond)
rx_slave = NULL;
- bond_for_each_slave_from(bond, slave, i, start_at) {
+ bond_for_each_slave_from(bond, slave, iter, start_at) {
if (SLAVE_IS_OK(slave)) {
if (!rx_slave) {
rx_slave = slave;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 297b910..59814c9 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -792,8 +792,8 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
{
struct slave *new_active, *old_active;
struct slave *bestslave = NULL;
+ struct list_head *iter;
int mintime = bond->params.updelay;
- int i;
new_active = bond->curr_active_slave;
@@ -812,7 +812,7 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
/* remember where to stop iterating over the slaves */
old_active = new_active;
- bond_for_each_slave_from(bond, new_active, i, old_active) {
+ bond_for_each_slave_from(bond, new_active, iter, old_active) {
if (new_active->link == BOND_LINK_UP) {
return new_active;
} else if (new_active->link == BOND_LINK_BACK &&
@@ -2783,7 +2783,7 @@ do_failover:
static void bond_ab_arp_probe(struct bonding *bond)
{
struct slave *slave, *next_slave;
- int i;
+ struct list_head *iter;
read_lock(&bond->curr_slave_lock);
@@ -2815,7 +2815,7 @@ static void bond_ab_arp_probe(struct bonding *bond)
/* search for next candidate */
next_slave = bond_next_slave(bond, bond->current_arp_slave);
- bond_for_each_slave_from(bond, slave, i, next_slave) {
+ bond_for_each_slave_from(bond, slave, iter, next_slave) {
if (IS_UP(slave->dev)) {
slave->link = BOND_LINK_BACK;
bond_set_slave_active_flags(slave);
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index b6dc9db..583077d 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -99,14 +99,13 @@
* bond_for_each_slave_from - iterate the slaves list from a starting point
* @bond: the bond holding this list.
* @pos: current slave.
- * @cnt: counter for max number of moves
+ * @iter: list_head * iterator
* @start: starting point.
*
* Caller must hold bond->lock
*/
-#define bond_for_each_slave_from(bond, pos, cnt, start) \
- for (cnt = 0, pos = start; pos && cnt < (bond)->slave_cnt; \
- cnt++, pos = bond_next_slave(bond, pos))
+#define bond_for_each_slave_from(bond, pos, iter, start) \
+ netdev_for_each_lower_neigh_private_continue((bond)->dev, pos, start, iter)
/**
* bond_for_each_slave - iterate over all slaves
--
1.8.4
next prev parent reply other threads:[~2013-09-02 21:39 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-02 21:39 [PATCH RFC net-next 0/21] bonding: use neighbours instead of own lists Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 01/21] net: add neighbour_dev_list to save only neighbours Veaceslav Falico
2013-09-03 8:29 ` Jiri Pirko
2013-09-03 8:34 ` Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 02/21] net: add RCU variant to search for netdev_adjacent link Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 03/21] net: add netdev_adjacent->private and allow to use it Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 04/21] net: expose the master link to sysfs, and remove it from bond Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 05/21] vlan: link the upper neighbour only after registering Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 06/21] net: create sysfs symlinks for neighbour devices Veaceslav Falico
2013-09-03 7:48 ` Jiri Pirko
2013-09-03 8:05 ` Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 07/21] bonding: add bond_has_slaves() and use it Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 08/21] bonding: convert bond_has_slaves() to use the neighbour list Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 09/21] bonding: populate neighbour's private on enslave Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 10/21] bonding: modify bond_get_slave_by_dev() to use neighbours Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 11/21] bonding: remove bond_for_each_slave_reverse() Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 12/21] net: add for_each iterators through neighbour lower link's private Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 13/21] bonding: make bond_for_each_slave() use lower neighbour's private Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 14/21] net: add netdev_for_each_lower_neigh_private_continue() Veaceslav Falico
2013-09-02 21:39 ` Veaceslav Falico [this message]
2013-09-02 21:39 ` [PATCH RFC net-next 16/21] net: add a possibility to get private from netdev_adjacent->list Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 17/21] bonding: convert first/last slave logic to use neighbours Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 18/21] net: add a function to get the next/prev private Veaceslav Falico
2013-09-03 8:10 ` Jiri Pirko
2013-09-02 21:39 ` [PATCH RFC net-next 19/21] bonding: use neighbours for bond_next/prev_slave() Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 20/21] bonding: use bond_for_each_slave() in bond_uninit() Veaceslav Falico
2013-09-02 21:39 ` [PATCH RFC net-next 21/21] bonding: remove slave lists Veaceslav Falico
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378157965-17537-16-git-send-email-vfalico@redhat.com \
--to=vfalico@redhat.com \
--cc=andy@greyhouse.net \
--cc=fubar@us.ibm.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).