From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Opdenacker Subject: [PATCH] mlx5: remove unused MLX5_DEBUG param in Kconfig Date: Fri, 6 Sep 2013 13:49:22 +0200 Message-ID: <1378468162-3109-1-git-send-email-michael.opdenacker@free-electrons.com> Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Michael Opdenacker To: eli-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org Return-path: Sender: linux-rdma-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: netdev.vger.kernel.org This patch proposes to remove the MLX5_DEBUG kernel configuration parameter defined in drivers/net/ethernet/mellanox/mlx5/core/Kconfig, but used nowhere in the makefiles and source code. This could also be fixed by using this parameter, but this may be a leftover from driver development... Signed-off-by: Michael Opdenacker --- drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig index 2196282..157fe8d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -6,13 +6,3 @@ config MLX5_CORE tristate depends on PCI && X86 default n - -config MLX5_DEBUG - bool "Verbose debugging output" if (MLX5_CORE && EXPERT) - depends on MLX5_CORE - default y - ---help--- - This option causes debugging code to be compiled into the - mlx5_core driver. The output can be turned on via the - debug_mask module parameter (which can also be set after - the driver is loaded through sysfs). -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html