* [PATCH net 0/2] Fix cnic regressions
@ 2013-09-18 8:50 Michael Chan
2013-09-18 8:50 ` [PATCH net 1/2] bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions Michael Chan
2013-09-18 16:24 ` [PATCH net 0/2] Fix cnic regressions David Miller
0 siblings, 2 replies; 4+ messages in thread
From: Michael Chan @ 2013-09-18 8:50 UTC (permalink / raw)
To: davem; +Cc: netdev, Michael Chan
Fix regressions caused by Doorbell change and macro change.
Ariel Elior (1):
bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions.
Michael Chan (1):
cnic: Fix crash in cnic_bnx2x_service_kcq()
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 36 ++++++++++++++++++++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 ++
drivers/net/ethernet/broadcom/cnic.c | 6 ++-
drivers/scsi/bnx2fc/bnx2fc.h | 2 +-
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 3 +-
drivers/scsi/bnx2i/bnx2i.h | 2 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 3 +-
7 files changed, 45 insertions(+), 11 deletions(-)
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH net 1/2] bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions.
2013-09-18 8:50 [PATCH net 0/2] Fix cnic regressions Michael Chan
@ 2013-09-18 8:50 ` Michael Chan
2013-09-18 8:50 ` [PATCH net 2/2] cnic: Fix crash in cnic_bnx2x_service_kcq() Michael Chan
2013-09-18 16:24 ` [PATCH net 0/2] Fix cnic regressions David Miller
1 sibling, 1 reply; 4+ messages in thread
From: Michael Chan @ 2013-09-18 8:50 UTC (permalink / raw)
To: davem; +Cc: netdev, Michael Chan, Ariel Elior, Eddie Wai
commit b9871bcfd211d316adee317608dab44c58d6ea2d
bnx2x: VF RSS support - PF side
changed the configuration of the doorbell HW and it broke iSCSI and FCoE.
We fix this by making compatible changes to the doorbell address in bnx2i
and bnx2fc. For the userspace driver, we need to pass a modified CID
so that the existing userspace driver will calculate the correct doorbell
address and continue to work.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 36 ++++++++++++++++++++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 ++
drivers/net/ethernet/broadcom/cnic.c | 3 +-
drivers/scsi/bnx2fc/bnx2fc.h | 2 +-
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 3 +-
drivers/scsi/bnx2i/bnx2i.h | 2 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 3 +-
7 files changed, 43 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 70b6a05..97b3d32 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -246,8 +246,37 @@ enum {
BNX2X_MAX_CNIC_ETH_CL_ID_IDX,
};
-#define BNX2X_CNIC_START_ETH_CID(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) *\
+/* use a value high enough to be above all the PFs, which has least significant
+ * nibble as 8, so when cnic needs to come up with a CID for UIO to use to
+ * calculate doorbell address according to old doorbell configuration scheme
+ * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number
+ * We must avoid coming up with cid 8 for iscsi since according to this method
+ * the designated UIO cid will come out 0 and it has a special handling for that
+ * case which doesn't suit us. Therefore will will cieling to closes cid which
+ * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18.
+ */
+
+#define BNX2X_1st_NON_L2_ETH_CID(bp) (BNX2X_NUM_NON_CNIC_QUEUES(bp) * \
(bp)->max_cos)
+/* amount of cids traversed by UIO's DPM addition to doorbell */
+#define UIO_DPM 8
+/* roundup to DPM offset */
+#define UIO_ROUNDUP(bp) (roundup(BNX2X_1st_NON_L2_ETH_CID(bp), \
+ UIO_DPM))
+/* offset to nearest value which has lsb nibble matching DPM */
+#define UIO_CID_OFFSET(bp) ((UIO_ROUNDUP(bp) + UIO_DPM) % \
+ (UIO_DPM * 2))
+/* add offset to rounded-up cid to get a value which could be used with UIO */
+#define UIO_DPM_ALIGN(bp) (UIO_ROUNDUP(bp) + UIO_CID_OFFSET(bp))
+/* but wait - avoid UIO special case for cid 0 */
+#define UIO_DPM_CID0_OFFSET(bp) ((UIO_DPM * 2) * \
+ (UIO_DPM_ALIGN(bp) == UIO_DPM))
+/* Properly DPM aligned CID dajusted to cid 0 secal case */
+#define BNX2X_CNIC_START_ETH_CID(bp) (UIO_DPM_ALIGN(bp) + \
+ (UIO_DPM_CID0_OFFSET(bp)))
+/* how many cids were wasted - need this value for cid allocation */
+#define UIO_CID_PAD(bp) (BNX2X_CNIC_START_ETH_CID(bp) - \
+ BNX2X_1st_NON_L2_ETH_CID(bp))
/* iSCSI L2 */
#define BNX2X_ISCSI_ETH_CID(bp) (BNX2X_CNIC_START_ETH_CID(bp))
/* FCoE L2 */
@@ -1680,10 +1709,11 @@ struct bnx2x {
* Maximum CID count that might be required by the bnx2x:
* Max RSS * Max_Tx_Multi_Cos + FCoE + iSCSI
*/
+
#define BNX2X_L2_CID_COUNT(bp) (BNX2X_NUM_ETH_QUEUES(bp) * BNX2X_MULTI_TX_COS \
- + 2 * CNIC_SUPPORT(bp))
+ + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
#define BNX2X_L2_MAX_CID(bp) (BNX2X_MAX_RSS_COUNT(bp) * BNX2X_MULTI_TX_COS \
- + 2 * CNIC_SUPPORT(bp))
+ + CNIC_SUPPORT(bp) * (2 + UIO_CID_PAD(bp)))
#define L2_ILT_LINES(bp) (DIV_ROUND_UP(BNX2X_L2_CID_COUNT(bp),\
ILT_PAGE_CIDS))
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 62c59ed..a6704b5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13632,6 +13632,10 @@ void bnx2x_setup_cnic_info(struct bnx2x *bp)
cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID(bp);
cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID(bp);
+ DP(NETIF_MSG_IFUP, "BNX2X_1st_NON_L2_ETH_CID(bp) %x, cp->starting_cid %x, cp->fcoe_init_cid %x, cp->iscsi_l2_cid %x\n",
+ BNX2X_1st_NON_L2_ETH_CID(bp), cp->starting_cid, cp->fcoe_init_cid,
+ cp->iscsi_l2_cid);
+
if (NO_ISCSI_OOO(bp))
cp->drv_state |= CNIC_DRV_STATE_NO_ISCSI_OOO;
}
diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index 8142480..93da16b 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -5217,7 +5217,8 @@ static void cnic_init_rings(struct cnic_dev *dev)
"iSCSI CLIENT_SETUP did not complete\n");
cnic_spq_completion(dev, DRV_CTL_RET_L2_SPQ_CREDIT_CMD, 1);
cnic_ring_ctl(dev, cid, cli, 1);
- *cid_ptr = cid;
+ *cid_ptr = cid >> 4;
+ *(cid_ptr + 1) = cid * bp->db_size;
}
}
diff --git a/drivers/scsi/bnx2fc/bnx2fc.h b/drivers/scsi/bnx2fc/bnx2fc.h
index 08b22a9..cadac9d 100644
--- a/drivers/scsi/bnx2fc/bnx2fc.h
+++ b/drivers/scsi/bnx2fc/bnx2fc.h
@@ -105,7 +105,7 @@
#define BNX2FC_RQ_WQE_SIZE (BNX2FC_RQ_BUF_SZ)
#define BNX2FC_XFERQ_WQE_SIZE (sizeof(struct fcoe_xfrqe))
#define BNX2FC_CONFQ_WQE_SIZE (sizeof(struct fcoe_confqe))
-#define BNX2FC_5771X_DB_PAGE_SIZE 128
+#define BNX2X_DB_SHIFT 3
#define BNX2FC_TASK_SIZE 128
#define BNX2FC_TASKS_PER_PAGE (PAGE_SIZE/BNX2FC_TASK_SIZE)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index c0d035a..df96ee6 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -1421,8 +1421,7 @@ int bnx2fc_map_doorbell(struct bnx2fc_rport *tgt)
reg_base = pci_resource_start(hba->pcidev,
BNX2X_DOORBELL_PCI_BAR);
- reg_off = BNX2FC_5771X_DB_PAGE_SIZE *
- (context_id & 0x1FFFF) + DPM_TRIGER_TYPE;
+ reg_off = (1 << BNX2X_DB_SHIFT) * (context_id & 0x1FFFF);
tgt->ctx_base = ioremap_nocache(reg_base + reg_off, 4);
if (!tgt->ctx_base)
return -ENOMEM;
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 6940f09..742a8c6 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -64,7 +64,7 @@
#define MAX_PAGES_PER_CTRL_STRUCT_POOL 8
#define BNX2I_RESERVED_SLOW_PATH_CMD_SLOTS 4
-#define BNX2I_5771X_DBELL_PAGE_SIZE 128
+#define BNX2X_DB_SHIFT 3
/* 5706/08 hardware has limit on maximum buffer size per BD it can handle */
#define MAX_BD_LENGTH 65535
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index af3e675..6a6e17f 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -2738,8 +2738,7 @@ int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
reg_base = pci_resource_start(ep->hba->pcidev,
BNX2X_DOORBELL_PCI_BAR);
- reg_off = BNX2I_5771X_DBELL_PAGE_SIZE * (cid_num & 0x1FFFF) +
- DPM_TRIGER_TYPE;
+ reg_off = (1 << BNX2X_DB_SHIFT) * (cid_num & 0x1FFFF);
ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off, 4);
goto arm_cq;
}
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH net 2/2] cnic: Fix crash in cnic_bnx2x_service_kcq()
2013-09-18 8:50 ` [PATCH net 1/2] bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions Michael Chan
@ 2013-09-18 8:50 ` Michael Chan
0 siblings, 0 replies; 4+ messages in thread
From: Michael Chan @ 2013-09-18 8:50 UTC (permalink / raw)
To: davem; +Cc: netdev, Michael Chan
commit 104a43edb264321a4d41850e98153b4fa8a9ef42
cnic: Use CHIP_NUM macros from bnx2x.h
changed the code to use the bnx2x macro NO_FCOE() to determine if FCoE
is supported or not. There is another place in cnic that is still using
the old method to determine if FCoE is supported or not. The 2 methods
may not yield the same result after the network interface is brought down
and up. This will cause the crash as cnic_bnx2x_service_kcq() will access
the uninitialized cp->kcq2.
The fix is to consistently use the same macro CNIC_SUPPORTS_FCOE() which
uses the bnx2x NO_FCOE() macro. As a follow-up, we can clean up the code
to remove the old method as it is no longer needed.
Signed-off-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/ethernet/broadcom/cnic.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c
index 93da16b..99394bd 100644
--- a/drivers/net/ethernet/broadcom/cnic.c
+++ b/drivers/net/ethernet/broadcom/cnic.c
@@ -3135,6 +3135,7 @@ static void cnic_service_bnx2x_bh(unsigned long data)
{
struct cnic_dev *dev = (struct cnic_dev *) data;
struct cnic_local *cp = dev->cnic_priv;
+ struct bnx2x *bp = netdev_priv(dev->netdev);
u32 status_idx, new_status_idx;
if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
@@ -3146,7 +3147,7 @@ static void cnic_service_bnx2x_bh(unsigned long data)
CNIC_WR16(dev, cp->kcq1.io_addr,
cp->kcq1.sw_prod_idx + MAX_KCQ_IDX);
- if (cp->ethdev->drv_state & CNIC_DRV_STATE_NO_FCOE) {
+ if (!CNIC_SUPPORTS_FCOE(bp)) {
cp->arm_int(dev, status_idx);
break;
}
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH net 0/2] Fix cnic regressions
2013-09-18 8:50 [PATCH net 0/2] Fix cnic regressions Michael Chan
2013-09-18 8:50 ` [PATCH net 1/2] bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions Michael Chan
@ 2013-09-18 16:24 ` David Miller
1 sibling, 0 replies; 4+ messages in thread
From: David Miller @ 2013-09-18 16:24 UTC (permalink / raw)
To: mchan; +Cc: netdev
From: "Michael Chan" <mchan@broadcom.com>
Date: Wed, 18 Sep 2013 01:50:37 -0700
> Fix regressions caused by Doorbell change and macro change.
Both applied, thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-09-18 16:24 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-18 8:50 [PATCH net 0/2] Fix cnic regressions Michael Chan
2013-09-18 8:50 ` [PATCH net 1/2] bnx2x, cnic, bnx2i, bnx2fc: Fix bnx2i and bnx2fc regressions Michael Chan
2013-09-18 8:50 ` [PATCH net 2/2] cnic: Fix crash in cnic_bnx2x_service_kcq() Michael Chan
2013-09-18 16:24 ` [PATCH net 0/2] Fix cnic regressions David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).