* [PATCH 04/19] isdn: Change variable type to bool
[not found] <1379802471-30252-1-git-send-email-peter.senna@gmail.com>
@ 2013-09-21 22:27 ` Peter Senna Tschudin
2013-09-21 22:27 ` [PATCH 08/19] net: " Peter Senna Tschudin
` (5 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Peter Senna Tschudin @ 2013-09-21 22:27 UTC (permalink / raw)
To: mac; +Cc: isdn4linux, netdev, linux-kernel, kernel-janitors,
Peter Senna Tschudin
The variable noCh is only assigned the values true and false. Change
its type to bool.
The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):
@exists@
type T;
identifier b;
@@
- T
+ bool
b = ...;
... when any
b = \(true\|false\)
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
---
drivers/isdn/hardware/eicon/message.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index a82e542..05d889a 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -1207,7 +1207,7 @@ static byte connect_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
byte m;
static byte esc_chi[35] = {0x02, 0x18, 0x01};
static byte lli[2] = {0x01, 0x00};
- byte noCh = 0;
+ bool noCh = false;
word dir = 0;
byte *p_chi = "";
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 08/19] net: Change variable type to bool
[not found] <1379802471-30252-1-git-send-email-peter.senna@gmail.com>
2013-09-21 22:27 ` [PATCH 04/19] isdn: Change variable type to bool Peter Senna Tschudin
@ 2013-09-21 22:27 ` Peter Senna Tschudin
2013-09-21 22:27 ` [PATCH 09/19] " Peter Senna Tschudin
` (4 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Peter Senna Tschudin @ 2013-09-21 22:27 UTC (permalink / raw)
To: jcliburn
Cc: chris.snook, jkosina, rdunlap, standby24x7, peter.senna, netdev,
linux-kernel, kernel-janitors
The variable ret is only assigned the values true and false.
The function atl1c_read_eeprom already returns bool. Change
ret type to bool.
The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):
@exists@
type T;
identifier b;
@@
- T
+ bool
b = ...;
... when any
b = \(true\|false\)
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
index 3ef7092..1cda49a 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
@@ -153,7 +153,7 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value)
{
int i;
- int ret = false;
+ bool ret = false;
u32 otp_ctrl_data;
u32 control;
u32 data;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 09/19] net: Change variable type to bool
[not found] <1379802471-30252-1-git-send-email-peter.senna@gmail.com>
2013-09-21 22:27 ` [PATCH 04/19] isdn: Change variable type to bool Peter Senna Tschudin
2013-09-21 22:27 ` [PATCH 08/19] net: " Peter Senna Tschudin
@ 2013-09-21 22:27 ` Peter Senna Tschudin
2013-09-23 21:38 ` David Miller
2013-09-21 22:27 ` [PATCH 10/19] " Peter Senna Tschudin
` (3 subsequent siblings)
6 siblings, 1 reply; 11+ messages in thread
From: Peter Senna Tschudin @ 2013-09-21 22:27 UTC (permalink / raw)
To: eilong; +Cc: netdev, linux-kernel, kernel-janitors, Peter Senna Tschudin
The variable rc is only assigned the values true and false.
The function bnx2x_prev_is_path_marked already returns bool.
Change rc type to bool.
The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):
@exists@
type T;
identifier b;
@@
- T
+ bool
b = ...;
... when any
b = \(true\|false\)
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index fccfc1d..105cc80 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -9874,7 +9874,7 @@ static int bnx2x_prev_path_mark_eeh(struct bnx2x *bp)
static bool bnx2x_prev_is_path_marked(struct bnx2x *bp)
{
struct bnx2x_prev_path_list *tmp_list;
- int rc = false;
+ bool rc = false;
if (down_trylock(&bnx2x_prev_sem))
return false;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 10/19] net: Change variable type to bool
[not found] <1379802471-30252-1-git-send-email-peter.senna@gmail.com>
` (2 preceding siblings ...)
2013-09-21 22:27 ` [PATCH 09/19] " Peter Senna Tschudin
@ 2013-09-21 22:27 ` Peter Senna Tschudin
2013-09-21 22:27 ` [PATCH 11/19] wireless: " Peter Senna Tschudin
` (2 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Peter Senna Tschudin @ 2013-09-21 22:27 UTC (permalink / raw)
To: hykim; +Cc: netdev, linux-kernel, kernel-janitors, Peter Senna Tschudin
There is the rc variable on both myri10ge_ss_lock_napi and
myri10ge_ss_lock_poll functions. In both cases rc is only assigned the
values true and false. Both functions already return bool. Change rc
type to bool.
The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):
@exists@
type T;
identifier b;
@@
- T
+ bool
b = ...;
... when any
b = \(true\|false\)
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
---
drivers/net/ethernet/myricom/myri10ge/myri10ge.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
index 149355b..7792264 100644
--- a/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
+++ b/drivers/net/ethernet/myricom/myri10ge/myri10ge.c
@@ -934,7 +934,7 @@ static inline void myri10ge_ss_init_lock(struct myri10ge_slice_state *ss)
static inline bool myri10ge_ss_lock_napi(struct myri10ge_slice_state *ss)
{
- int rc = true;
+ bool rc = true;
spin_lock(&ss->lock);
if ((ss->state & SLICE_LOCKED)) {
WARN_ON((ss->state & SLICE_STATE_NAPI));
@@ -957,7 +957,7 @@ static inline void myri10ge_ss_unlock_napi(struct myri10ge_slice_state *ss)
static inline bool myri10ge_ss_lock_poll(struct myri10ge_slice_state *ss)
{
- int rc = true;
+ bool rc = true;
spin_lock_bh(&ss->lock);
if ((ss->state & SLICE_LOCKED)) {
ss->state |= SLICE_STATE_POLL_YIELD;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 11/19] wireless: Change variable type to bool
[not found] <1379802471-30252-1-git-send-email-peter.senna@gmail.com>
` (3 preceding siblings ...)
2013-09-21 22:27 ` [PATCH 10/19] " Peter Senna Tschudin
@ 2013-09-21 22:27 ` Peter Senna Tschudin
2013-09-23 19:40 ` Bing Zhao
2013-09-21 22:27 ` [PATCH 12/19] " Peter Senna Tschudin
2013-09-21 22:27 ` [PATCH 19/19] net: " Peter Senna Tschudin
6 siblings, 1 reply; 11+ messages in thread
From: Peter Senna Tschudin @ 2013-09-21 22:27 UTC (permalink / raw)
To: bzhao
Cc: linville, linux-wireless, netdev, linux-kernel, kernel-janitors,
Peter Senna Tschudin
The variables cancel_scan_cmd, enable_data, hs_activate and valid are
only assigned the values true and false. Change its type to bool.
The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):
@exists@
type T;
identifier b;
@@
- T
+ bool
b = ...;
... when any
b = \(true\|false\)
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
---
drivers/net/wireless/mwifiex/cmdevt.c | 2 +-
drivers/net/wireless/mwifiex/join.c | 2 +-
drivers/net/wireless/mwifiex/sta_cmd.c | 2 +-
drivers/net/wireless/mwifiex/wmm.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 2d76147..fb3fa18 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1048,7 +1048,7 @@ mwifiex_cancel_pending_ioctl(struct mwifiex_adapter *adapter)
struct cmd_ctrl_node *cmd_node = NULL, *tmp_node = NULL;
unsigned long cmd_flags;
unsigned long scan_pending_q_flags;
- uint16_t cancel_scan_cmd = false;
+ bool cancel_scan_cmd = false;
if ((adapter->curr_cmd) &&
(adapter->curr_cmd->wait_q_enabled)) {
diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c
index 9d7c0e6..717fbe2 100644
--- a/drivers/net/wireless/mwifiex/join.c
+++ b/drivers/net/wireless/mwifiex/join.c
@@ -621,7 +621,7 @@ int mwifiex_ret_802_11_associate(struct mwifiex_private *priv,
int ret = 0;
struct ieee_types_assoc_rsp *assoc_rsp;
struct mwifiex_bssdescriptor *bss_desc;
- u8 enable_data = true;
+ bool enable_data = true;
u16 cap_info, status_code;
assoc_rsp = (struct ieee_types_assoc_rsp *) &resp->params;
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index c0268b5..7d66018 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -327,7 +327,7 @@ mwifiex_cmd_802_11_hs_cfg(struct mwifiex_private *priv,
{
struct mwifiex_adapter *adapter = priv->adapter;
struct host_cmd_ds_802_11_hs_cfg_enh *hs_cfg = &cmd->params.opt_hs_cfg;
- u16 hs_activate = false;
+ bool hs_activate = false;
if (!hscfg_param)
/* New Activate command */
diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index 2e8f9cd..8f8fea0 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -708,7 +708,7 @@ int mwifiex_ret_wmm_get_status(struct mwifiex_private *priv,
{
u8 *curr = (u8 *) &resp->params.get_wmm_status;
uint16_t resp_len = le16_to_cpu(resp->size), tlv_len;
- int valid = true;
+ bool valid = true;
struct mwifiex_ie_types_data *tlv_hdr;
struct mwifiex_ie_types_wmm_queue_status *tlv_wmm_qstatus;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* RE: [PATCH 11/19] wireless: Change variable type to bool
2013-09-21 22:27 ` [PATCH 11/19] wireless: " Peter Senna Tschudin
@ 2013-09-23 19:40 ` Bing Zhao
0 siblings, 0 replies; 11+ messages in thread
From: Bing Zhao @ 2013-09-23 19:40 UTC (permalink / raw)
To: Peter Senna Tschudin
Cc: linville@tuxdriver.com, linux-wireless@vger.kernel.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel-janitors@vger.kernel.org
Hi Peter,
Thanks for your patch.
> The variables cancel_scan_cmd, enable_data, hs_activate and valid are
> only assigned the values true and false. Change its type to bool.
>
> The simplified semantic patch that find this problem is as
> follows (http://coccinelle.lip6.fr/):
>
> @exists@
> type T;
> identifier b;
> @@
> - T
> + bool
> b = ...;
> ... when any
> b = \(true\|false\)
>
> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Thanks,
Bing
> ---
> drivers/net/wireless/mwifiex/cmdevt.c | 2 +-
> drivers/net/wireless/mwifiex/join.c | 2 +-
> drivers/net/wireless/mwifiex/sta_cmd.c | 2 +-
> drivers/net/wireless/mwifiex/wmm.c | 2 +-
> 4 files changed, 4 insertions(+), 4 deletions(-)
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 12/19] wireless: Change variable type to bool
[not found] <1379802471-30252-1-git-send-email-peter.senna@gmail.com>
` (4 preceding siblings ...)
2013-09-21 22:27 ` [PATCH 11/19] wireless: " Peter Senna Tschudin
@ 2013-09-21 22:27 ` Peter Senna Tschudin
2013-09-22 8:22 ` Joe Perches
2013-09-24 10:54 ` Kalle Valo
2013-09-21 22:27 ` [PATCH 19/19] net: " Peter Senna Tschudin
6 siblings, 2 replies; 11+ messages in thread
From: Peter Senna Tschudin @ 2013-09-21 22:27 UTC (permalink / raw)
To: Larry.Finger
Cc: chaoming_li, linville, linux-wireless, netdev, linux-kernel,
kernel-janitors, Peter Senna Tschudin
The variable continual is only assigned the values true and false.
Change its type to bool.
The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):
@exists@
type T;
identifier b;
@@
- T
+ bool
b = ...;
... when any
b = \(true\|false\)
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
---
drivers/net/wireless/rtlwifi/efuse.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
index 838a1ed..63d370d 100644
--- a/drivers/net/wireless/rtlwifi/efuse.c
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -1203,7 +1203,7 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
static u16 efuse_get_current_size(struct ieee80211_hw *hw)
{
- int continual = true;
+ bool continual = true;
u16 efuse_addr = 0;
u8 hworden;
u8 efuse_data, word_cnts;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH 12/19] wireless: Change variable type to bool
2013-09-21 22:27 ` [PATCH 12/19] " Peter Senna Tschudin
@ 2013-09-22 8:22 ` Joe Perches
2013-09-24 10:54 ` Kalle Valo
1 sibling, 0 replies; 11+ messages in thread
From: Joe Perches @ 2013-09-22 8:22 UTC (permalink / raw)
To: Peter Senna Tschudin
Cc: Larry.Finger, chaoming_li, linville, linux-wireless, netdev,
linux-kernel, kernel-janitors
On Sun, 2013-09-22 at 00:27 +0200, Peter Senna Tschudin wrote:
> The variable continual is only assigned the values true and false.
> Change its type to bool.
[]
> diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
[]
> @@ -1203,7 +1203,7 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate)
>
> static u16 efuse_get_current_size(struct ieee80211_hw *hw)
> {
> - int continual = true;
> + bool continual = true;
> u16 efuse_addr = 0;
> u8 hworden;
> u8 efuse_data, word_cnts;
Yes, this could use bool, but would probably be better
written without continual at all
as it is before this patch:
static u16 efuse_get_current_size(struct ieee80211_hw *hw)
{
int continual = true;
u16 efuse_addr = 0;
u8 hworden;
u8 efuse_data, word_cnts;
while (continual && efuse_one_byte_read(hw, efuse_addr, &efuse_data)
&& (efuse_addr < EFUSE_MAX_SIZE)) {
if (efuse_data != 0xFF) {
hworden = efuse_data & 0x0F;
word_cnts = efuse_calculate_word_cnts(hworden);
efuse_addr = efuse_addr + (word_cnts * 2) + 1;
} else {
continual = false;
}
}
return efuse_addr;
}
I think writing it without continual, which is effectively
an ersatz "break", would be better
Something like:
static u16 efuse_get_current_size(struct ieee80211_hw *hw)
{
u16 efuse_addr = 0;
u8 hworden;
u8 efuse_data, word_cnts;
while (efuse_one_byte_read(hw, efuse_addr, &efuse_data) &&
(efuse_addr < EFUSE_MAX_SIZE) {
if (efuse_data == 0xff)
break;
hworden = efuse_data & 0x0F;
word_cnts = efuse_calculate_word_cnts(hworden);
efuse_addr = efuse_addr + (word_cnts * 2) + 1;
}
return efuse_addr;
}
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH 12/19] wireless: Change variable type to bool
2013-09-21 22:27 ` [PATCH 12/19] " Peter Senna Tschudin
2013-09-22 8:22 ` Joe Perches
@ 2013-09-24 10:54 ` Kalle Valo
1 sibling, 0 replies; 11+ messages in thread
From: Kalle Valo @ 2013-09-24 10:54 UTC (permalink / raw)
To: Peter Senna Tschudin
Cc: Larry.Finger, chaoming_li, linville, linux-wireless, netdev,
linux-kernel, kernel-janitors
Peter Senna Tschudin <peter.senna@gmail.com> writes:
> The variable continual is only assigned the values true and false.
> Change its type to bool.
>
> The simplified semantic patch that find this problem is as
> follows (http://coccinelle.lip6.fr/):
>
> @exists@
> type T;
> identifier b;
> @@
> - T
> + bool
> b = ...;
> ... when any
> b = \(true\|false\)
>
> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
> ---
> drivers/net/wireless/rtlwifi/efuse.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Please prefix the patch title with "rtlwifi:". We use "wireless:" for
changes to net/wireless.
--
Kalle Valo
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 19/19] net: Change variable type to bool
[not found] <1379802471-30252-1-git-send-email-peter.senna@gmail.com>
` (5 preceding siblings ...)
2013-09-21 22:27 ` [PATCH 12/19] " Peter Senna Tschudin
@ 2013-09-21 22:27 ` Peter Senna Tschudin
6 siblings, 0 replies; 11+ messages in thread
From: Peter Senna Tschudin @ 2013-09-21 22:27 UTC (permalink / raw)
To: davem
Cc: kuznet, jmorris, kaber, netdev, linux-kernel, kernel-janitors,
Peter Senna Tschudin
The variable fully_acked is only assigned the values true and false.
Change its type to bool.
The simplified semantic patch that find this problem is as
follows (http://coccinelle.lip6.fr/):
@exists@
type T;
identifier b;
@@
- T
+ bool
b = ...;
... when any
b = \(true\|false\)
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
---
net/ipv4/tcp_input.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 25a89ea..fa17dce 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2970,7 +2970,7 @@ static int tcp_clean_rtx_queue(struct sock *sk, int prior_fackets,
const struct inet_connection_sock *icsk = inet_csk(sk);
struct sk_buff *skb;
u32 now = tcp_time_stamp;
- int fully_acked = true;
+ bool fully_acked = true;
int flag = 0;
u32 pkts_acked = 0;
u32 reord = tp->packets_out;
--
1.8.3.1
^ permalink raw reply related [flat|nested] 11+ messages in thread