netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Veaceslav Falico <vfalico@redhat.com>
To: netdev@vger.kernel.org
Cc: jiri@resnulli.us, Veaceslav Falico <vfalico@redhat.com>,
	Jay Vosburgh <fubar@us.ibm.com>,
	Andy Gospodarek <andy@greyhouse.net>
Subject: [PATCH v4 net-next 14/27] bonding: rework bond_ab_arp_probe() to use bond_for_each_slave()
Date: Tue, 24 Sep 2013 13:46:54 +0200	[thread overview]
Message-ID: <1380023227-9576-15-git-send-email-vfalico@redhat.com> (raw)
In-Reply-To: <1380023227-9576-1-git-send-email-vfalico@redhat.com>

Currently it uses the hard-to-rcuify bond_for_each_slave_from(), and also
it doesn't check every slave for disrepencies between the actual
IS_UP(slave) and the slave->link == BOND_LINK_UP, but only till we find the
next suitable slave.

Fix this by using bond_for_each_slave() and storing the first good slave in
*before till we find the current_arp_slave, after that we store the first good
slave in new_slave. If new_slave is empty - use the slave stored in before,
and if it's also empty - then we didn't find any suitable slave.

Also, in the meanwhile, check for each slave status.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
---

Notes:
    v3  -> v4:
    No change.
    
    v2  -> v3:
    No change.
    
    v1  -> v2:
    No changes.
    
    RFC -> v1:
    New patch.

 drivers/net/bonding/bond_main.c | 38 ++++++++++++++++++++++++--------------
 1 file changed, 24 insertions(+), 14 deletions(-)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 6abbfac..3c96b1b 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2761,8 +2761,9 @@ do_failover:
  */
 static void bond_ab_arp_probe(struct bonding *bond)
 {
-	struct slave *slave, *next_slave;
-	int i;
+	struct slave *slave, *before = NULL, *new_slave = NULL;
+	struct list_head *iter;
+	bool found = false;
 
 	read_lock(&bond->curr_slave_lock);
 
@@ -2792,18 +2793,12 @@ static void bond_ab_arp_probe(struct bonding *bond)
 
 	bond_set_slave_inactive_flags(bond->current_arp_slave);
 
-	/* search for next candidate */
-	next_slave = bond_next_slave(bond, bond->current_arp_slave);
-	bond_for_each_slave_from(bond, slave, i, next_slave) {
-		if (IS_UP(slave->dev)) {
-			slave->link = BOND_LINK_BACK;
-			bond_set_slave_active_flags(slave);
-			bond_arp_send_all(bond, slave);
-			slave->jiffies = jiffies;
-			bond->current_arp_slave = slave;
-			break;
-		}
+	bond_for_each_slave(bond, slave, iter) {
+		if (!found && !before && IS_UP(slave->dev))
+			before = slave;
 
+		if (found && !new_slave && IS_UP(slave->dev))
+			new_slave = slave;
 		/* if the link state is up at this point, we
 		 * mark it down - this can happen if we have
 		 * simultaneous link failures and
@@ -2811,7 +2806,7 @@ static void bond_ab_arp_probe(struct bonding *bond)
 		 * one the current slave so it is still marked
 		 * up when it is actually down
 		 */
-		if (slave->link == BOND_LINK_UP) {
+		if (!IS_UP(slave->dev) && slave->link == BOND_LINK_UP) {
 			slave->link = BOND_LINK_DOWN;
 			if (slave->link_failure_count < UINT_MAX)
 				slave->link_failure_count++;
@@ -2821,7 +2816,22 @@ static void bond_ab_arp_probe(struct bonding *bond)
 			pr_info("%s: backup interface %s is now down.\n",
 				bond->dev->name, slave->dev->name);
 		}
+		if (slave == bond->current_arp_slave)
+			found = true;
 	}
+
+	if (!new_slave && before)
+		new_slave = before;
+
+	if (!new_slave)
+		return;
+
+	new_slave->link = BOND_LINK_BACK;
+	bond_set_slave_active_flags(new_slave);
+	bond_arp_send_all(bond, new_slave);
+	new_slave->jiffies = jiffies;
+	bond->current_arp_slave = new_slave;
+
 }
 
 void bond_activebackup_arp_mon(struct work_struct *work)
-- 
1.8.4

  parent reply	other threads:[~2013-09-24 11:48 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-24 11:46 [PATCH v4 net-next 00/27] bonding: use neighbours instead of own lists Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 01/27] net: use lists as arguments instead of bool upper Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 02/27] net: add adj_list to save only neighbours Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 03/27] net: add RCU variant to search for netdev_adjacent link Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 04/27] net: add netdev_adjacent->private and allow to use it Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 05/27] bonding: populate neighbour's private on enslave Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 06/27] bonding: modify bond_get_slave_by_dev() to use neighbours Veaceslav Falico
2013-09-24 19:19   ` David Miller
2013-09-24 19:39     ` Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 07/27] net: add for_each iterators through neighbour lower link's private Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 08/27] bonding: remove bond_for_each_slave_continue_reverse() Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 09/27] bonding: make bond_for_each_slave() use lower neighbour's private Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 10/27] bonding: use bond_for_each_slave() in bond_uninit() Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 11/27] bonding: rework bond_3ad_xmit_xor() to use bond_for_each_slave() only Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 12/27] bonding: rework rlb_next_rx_slave() to use bond_for_each_slave() Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 13/27] bonding: rework bond_find_best_slave() " Veaceslav Falico
2013-09-24 11:46 ` Veaceslav Falico [this message]
2013-09-24 11:46 ` [PATCH v4 net-next 15/27] bonding: remove unused bond_for_each_slave_from() Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 16/27] bonding: add bond_has_slaves() and use it Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 17/27] bonding: convert bond_has_slaves() to use the neighbour list Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 18/27] net: add a possibility to get private from netdev_adjacent->list Veaceslav Falico
2013-09-24 11:46 ` [PATCH v4 net-next 19/27] bonding: convert first/last slave logic to use neighbours Veaceslav Falico
2013-09-24 11:47 ` [PATCH v4 net-next 20/27] bonding: remove bond_prev_slave() Veaceslav Falico
2013-09-24 11:47 ` [PATCH v4 net-next 21/27] bonding: add __bond_next_slave() which uses neighbours Veaceslav Falico
2013-09-24 11:47 ` [PATCH v4 net-next 22/27] bonding: use neighbours for bond_next_slave() Veaceslav Falico
2013-09-24 11:47 ` [PATCH v4 net-next 23/27] bonding: remove slave lists Veaceslav Falico
2013-09-24 11:47 ` [PATCH v4 net-next 24/27] vlan: link the upper neighbour only after registering Veaceslav Falico
2013-09-24 11:47 ` [PATCH v4 net-next 25/27] vlan: unlink the upper neighbour before unregistering Veaceslav Falico
2013-09-24 11:47 ` [PATCH v4 net-next 26/27] net: expose the master link to sysfs, and remove it from bond Veaceslav Falico
2013-09-24 11:47 ` [PATCH v4 net-next 27/27] net: create sysfs symlinks for neighbour devices Veaceslav Falico

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1380023227-9576-15-git-send-email-vfalico@redhat.com \
    --to=vfalico@redhat.com \
    --cc=andy@greyhouse.net \
    --cc=fubar@us.ibm.com \
    --cc=jiri@resnulli.us \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).