From: "Yuval Mintz" <yuvalmin@broadcom.com>
To: davem@davemloft.net, netdev@vger.kernel.org
Cc: ariele@broadcom.com, eilong@broadcom.com,
"Yuval Mintz" <yuvalmin@broadcom.com>
Subject: [PATCH net-next 6/6] bnx2x: use pcie_get_minimum_link()
Date: Sat, 28 Sep 2013 08:46:12 +0300 [thread overview]
Message-ID: <1380347172-16670-7-git-send-email-yuvalmin@broadcom.com> (raw)
In-Reply-To: <1380347172-16670-1-git-send-email-yuvalmin@broadcom.com>
Use common code for getting the pcie link speed/width for debug printing.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 6 ----
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 45 +++++++-----------------
2 files changed, 12 insertions(+), 39 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index a38d049..8fe4bcb 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2491,11 +2491,5 @@ enum {
#define NUM_MACS 8
-enum bnx2x_pci_bus_speed {
- BNX2X_PCI_LINK_SPEED_2500 = 2500,
- BNX2X_PCI_LINK_SPEED_5000 = 5000,
- BNX2X_PCI_LINK_SPEED_8000 = 8000
-};
-
void bnx2x_set_local_cmng(struct bnx2x *bp);
#endif /* bnx2x.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 467689f..654680d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12274,28 +12274,6 @@ err_out:
return rc;
}
-static void bnx2x_get_pcie_width_speed(struct bnx2x *bp, int *width,
- enum bnx2x_pci_bus_speed *speed)
-{
- u32 link_speed, val = 0;
-
- pci_read_config_dword(bp->pdev, PCICFG_LINK_CONTROL, &val);
- *width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
-
- link_speed = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
-
- switch (link_speed) {
- case 3:
- *speed = BNX2X_PCI_LINK_SPEED_8000;
- break;
- case 2:
- *speed = BNX2X_PCI_LINK_SPEED_5000;
- break;
- default:
- *speed = BNX2X_PCI_LINK_SPEED_2500;
- }
-}
-
static int bnx2x_check_firmware(struct bnx2x *bp)
{
const struct firmware *firmware = bp->firmware;
@@ -12652,8 +12630,8 @@ static int bnx2x_init_one(struct pci_dev *pdev,
{
struct net_device *dev = NULL;
struct bnx2x *bp;
- int pcie_width;
- enum bnx2x_pci_bus_speed pcie_speed;
+ enum pcie_link_width pcie_width;
+ enum pci_bus_speed pcie_speed;
int rc, max_non_def_sbs;
int rx_count, tx_count, rss_count, doorbell_size;
int max_cos_est;
@@ -12802,18 +12780,19 @@ static int bnx2x_init_one(struct pci_dev *pdev,
dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
rtnl_unlock();
}
-
- bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
- BNX2X_DEV_INFO("got pcie width %d and speed %d\n",
- pcie_width, pcie_speed);
-
- BNX2X_DEV_INFO("%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+ if (pcie_get_minimum_link(bp->pdev, &pcie_speed, &pcie_width) ||
+ pcie_speed == PCI_SPEED_UNKNOWN ||
+ pcie_width == PCIE_LNK_WIDTH_UNKNOWN)
+ BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n");
+ else
+ BNX2X_DEV_INFO(
+ "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
board_info[ent->driver_data].name,
(CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
pcie_width,
- pcie_speed == BNX2X_PCI_LINK_SPEED_2500 ? "2.5GHz" :
- pcie_speed == BNX2X_PCI_LINK_SPEED_5000 ? "5.0GHz" :
- pcie_speed == BNX2X_PCI_LINK_SPEED_8000 ? "8.0GHz" :
+ pcie_speed == PCIE_SPEED_2_5GT ? "2.5GHz" :
+ pcie_speed == PCIE_SPEED_5_0GT ? "5.0GHz" :
+ pcie_speed == PCIE_SPEED_8_0GT ? "8.0GHz" :
"Unknown",
dev->base_addr, bp->pdev->irq, dev->dev_addr);
--
1.8.1.227.g44fe835
next prev parent reply other threads:[~2013-09-28 5:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-28 5:46 [PATCH net-next 0/6] bnx2x: enhancements patch series Yuval Mintz
2013-09-28 5:46 ` [PATCH net-next 1/6] bnx2x: Test nvram when interface is down Yuval Mintz
2013-09-28 5:46 ` [PATCH net-next 2/6] bnx2x: Correct VF driver info Yuval Mintz
2013-09-28 5:46 ` [PATCH net-next 3/6] bnx2x: Don't disable/enable SR-IOV when loading Yuval Mintz
2013-09-28 5:46 ` [PATCH net-next 4/6] bnx2x: Change function prototype Yuval Mintz
2013-09-28 5:46 ` [PATCH net-next 5/6] bnx2x: Add support for EXTPHY2 LED mode Yuval Mintz
2013-09-28 5:46 ` Yuval Mintz [this message]
2013-09-28 22:24 ` [PATCH net-next 0/6] bnx2x: enhancements patch series David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380347172-16670-7-git-send-email-yuvalmin@broadcom.com \
--to=yuvalmin@broadcom.com \
--cc=ariele@broadcom.com \
--cc=davem@davemloft.net \
--cc=eilong@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).