From: Tino Reichardt <milky-kernel@mcmilk.de>
To: netdev@vger.kernel.org, "David S. Miller" <davem@davemloft.net>,
Joe Perches <joe@perches.com>, Jiri Pirko <jiri@resnulli.us>,
Bill Pemberton <wfp5p@virginia.edu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: [PATCH 01/07] 8139too: Support for byte queue limits
Date: Mon, 14 Oct 2013 20:26:17 +0200 [thread overview]
Message-ID: <1381775183-24866-2-git-send-email-milky-kernel@mcmilk.de> (raw)
In-Reply-To: <1381775183-24866-1-git-send-email-milky-kernel@mcmilk.de>
Changes to 8139too to use byte queue limits.
This patch was not tested on real hardware currently, but compiles fine and
should work.
Signed-off-by: Tino Reichardt <milky-kernel@mcmilk.de>
---
drivers/net/ethernet/realtek/8139too.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index 3ccedeb..992ac57 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -1409,6 +1409,7 @@ static void rtl8139_hw_start (struct net_device *dev)
}
netdev_dbg(dev, "init buffer addresses\n");
+ netdev_reset_queue(dev);
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1638,6 +1639,7 @@ static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
{
tp->cur_tx = 0;
tp->dirty_tx = 0;
+ netdev_reset_queue(tp->dev);
/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
}
@@ -1733,6 +1735,7 @@ static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
tp->cur_tx++;
+ netdev_sent_queue(dev, len);
if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
netif_stop_queue (dev);
@@ -1750,6 +1753,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
void __iomem *ioaddr)
{
unsigned long dirty_tx, tx_left;
+ unsigned bytes_compl = 0, pkts_compl = 0;
assert (dev != NULL);
assert (ioaddr != NULL);
@@ -1792,6 +1796,8 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
u64_stats_update_begin(&tp->tx_stats.syncp);
tp->tx_stats.packets++;
tp->tx_stats.bytes += txstatus & 0x7ff;
+ pkts_compl++;
+ bytes_compl += txstatus & 0x7ff;
u64_stats_update_end(&tp->tx_stats.syncp);
}
@@ -1807,6 +1813,8 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
}
#endif /* RTL8139_NDEBUG */
+ netdev_completed_queue(dev, pkts_compl, bytes_compl);
+
/* only wake the queue if we did work, and the queue is stopped */
if (tp->dirty_tx != dirty_tx) {
tp->dirty_tx = dirty_tx;
--
1.8.4
next prev parent reply other threads:[~2013-10-14 18:35 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-14 18:26 [PATCHSET v1 00/07] Support for byte queue limits on various network interfaces Tino Reichardt
2013-10-14 18:26 ` Tino Reichardt [this message]
2013-10-14 19:11 ` [PATCH 01/07] 8139too: Support for byte queue limits Eric Dumazet
2013-10-14 19:31 ` Tino Reichardt
2013-10-14 19:52 ` Tino Reichardt
2013-10-14 18:26 ` [PATCH 02/07] r8169: " Tino Reichardt
2013-10-14 22:28 ` Francois Romieu
2013-10-14 18:26 ` [PATCH 03/03] tulip: " Tino Reichardt
2013-10-14 18:26 ` [PATCH 04/07] via-rhine: " Tino Reichardt
2013-10-14 18:26 ` [PATCH 05/07] via-velocity: " Tino Reichardt
2013-10-14 18:26 ` [PATCH 06/07] 3c59x: " Tino Reichardt
2013-10-14 18:26 ` [PATCH 07/07] natsemi: " Tino Reichardt
2013-10-14 18:41 ` [PATCHSET v1 00/07] Support for byte queue limits on various network interfaces Stephen Hemminger
2013-10-14 18:46 ` Tino Reichardt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381775183-24866-2-git-send-email-milky-kernel@mcmilk.de \
--to=milky-kernel@mcmilk.de \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=jiri@resnulli.us \
--cc=joe@perches.com \
--cc=netdev@vger.kernel.org \
--cc=wfp5p@virginia.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).