From mboxrd@z Thu Jan 1 00:00:00 1970 From: Veaceslav Falico Subject: [PATCH net-next] bonding: move bond-specific init after enslave happens Date: Sun, 20 Oct 2013 14:47:53 +0200 Message-ID: <1382273273-27344-1-git-send-email-vfalico@redhat.com> Cc: jiri@resnulli.us, Veaceslav Falico , Jay Vosburgh , Andy Gospodarek To: netdev@vger.kernel.org Return-path: Received: from mx1.redhat.com ([209.132.183.28]:13545 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750958Ab3JTMsT (ORCPT ); Sun, 20 Oct 2013 08:48:19 -0400 Sender: netdev-owner@vger.kernel.org List-ID: As Jiri noted, currently we first do all bonding-specific initialization (specifically - bond_select_active_slave(bond)) before we actually attach the slave (so that it becomes visible through bond_for_each_slave() and friends). This might result in bond_select_active_slave() not seeing the first/new slave and, thus, not actually selecting an active slave. Fix this by moving all the bond-related init part after we've actually completely initialized and linked (via bond_master_upper_dev_link()) the new slave. After this we have all the initialization of the new slave *before* linking, and all the stuff that needs to be done on bonding *after* it. It has also a bonus effect - we can remove the locking on the new slave init completely, and only use it for bond_select_active_slave(). Reported-by: Jiri Pirko CC: Jay Vosburgh CC: Andy Gospodarek Signed-off-by: Veaceslav Falico --- drivers/net/bonding/bond_main.c | 29 ++++++++++------------------- 1 file changed, 10 insertions(+), 19 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index d90734f..047c0fb 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1471,22 +1471,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) goto err_close; } - write_lock_bh(&bond->lock); - prev_slave = bond_last_slave(bond); bond_attach_slave(bond, new_slave); new_slave->delay = 0; new_slave->link_failure_count = 0; - write_unlock_bh(&bond->lock); - - bond_compute_features(bond); - bond_update_speed_duplex(new_slave); - read_lock(&bond->lock); - new_slave->last_arp_rx = jiffies - (msecs_to_jiffies(bond->params.arp_interval) + 1); for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) @@ -1547,12 +1539,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) } } - write_lock_bh(&bond->curr_slave_lock); - switch (bond->params.mode) { case BOND_MODE_ACTIVEBACKUP: bond_set_slave_inactive_flags(new_slave); - bond_select_active_slave(bond); break; case BOND_MODE_8023AD: /* in 802.3ad mode, the internal mechanism @@ -1578,7 +1567,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) case BOND_MODE_ALB: bond_set_active_slave(new_slave); bond_set_slave_inactive_flags(new_slave); - bond_select_active_slave(bond); break; default: pr_debug("This slave is always active in trunk mode\n"); @@ -1596,10 +1584,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) break; } /* switch(bond_mode) */ - write_unlock_bh(&bond->curr_slave_lock); - - bond_set_carrier(bond); - #ifdef CONFIG_NET_POLL_CONTROLLER slave_dev->npinfo = bond->dev->npinfo; if (slave_dev->npinfo) { @@ -1614,8 +1598,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) } #endif - read_unlock(&bond->lock); - res = netdev_rx_handler_register(slave_dev, bond_handle_frame, new_slave); if (res) { @@ -1629,6 +1611,16 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) goto err_unregister; } + bond_compute_features(bond); + bond_set_carrier(bond); + + if (USES_PRIMARY(bond->params.mode)) { + read_lock(&bond->lock); + write_lock_bh(&bond->curr_slave_lock); + bond_select_active_slave(bond); + write_unlock_bh(&bond->curr_slave_lock); + read_unlock(&bond->lock); + } pr_info("%s: enslaving %s as a%s interface with a%s link.\n", bond_dev->name, slave_dev->name, @@ -1686,7 +1678,6 @@ err_free: kfree(new_slave); err_undo_flags: - bond_compute_features(bond); /* Enslave of first slave has failed and we need to fix master's mac */ if (!bond_has_slaves(bond) && ether_addr_equal(bond_dev->dev_addr, slave_dev->dev_addr)) -- 1.8.1.4