[net-next v2 00/14][pull request] Intel Wired LAN Driver Updates

[net-next v2 00/14][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

This series contains updates to i40e only.

Jesse provides 6 patches against i40e.  First is a patch to reduce
CPU utilization by reducing read-flush to read in the hot path.  Next
couple of patches resolve coverity issues reported by Hannes Frederic
Sowa <hannes@stressinduktion.org>.  Then Jesse refactored i40e to cleanup
functions which used cpu_to_xxx(foo) which caused a lot of line wrapping.

Mitch provides 2 i40e patches.  First fixes a panic when tx_rings[0]
are not allocated, his second patch corrects a math error when
assigning MSI-X vectors to VFs.  The vectors-per-vf value reported
by the hardware already conveniently reports one less than the actual
value.

Shannon provides 5 patches against i40e.  His first patch corrects a
number of little bugs in the error handling of irq setup, most of
which ended up panicing the kernel.  Next he fixes the overactive
IRQ issue seen in testing and allows the use of the legacy interrupt.
Shannon then provides a cleanup of the arguments declared at the
beginning of each function.  Then he provides a patch to make sure
that there are really rings and queues before trying to dump
information in them.  Lastly he simplifies the code by using an
already existing variable.

Catherine provides an i40e patch to bump the version.

v2:
 - Remove unneeded parenthesis in patch 3 based on feedback from
   Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
 - Fix patch description for patch 11 based on feedback from
   Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

The following are changes since commit bda301c9dc545f81bd70c1eecb8572bfc5eb524c:
  Merge branch 'sit_tso'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next master

Catherine Sullivan (1):
  i40e: Bump version

Jesse Brandeburg (6):
  i40e: do not flush after re-enabling interrupts
  i40e: debugfs fixups
  i40e: clamp debugfs nvm read command
  i40e: fix use of untrusted scalar value warning
  i40e: fix sign extension issue
  i40e: refactor fdir setup function

Mitch Williams (2):
  i40e: don't free nonexistent rings
  i40e: assign correct vector to VF

Shannon Nelson (5):
  i40e: fixup legacy interrupt handling
  i40e: tweaking icr0 handling for legacy irq
  i40e: reorder block declarations in debugfs
  i40e: check vsi ptrs before dumping them
  i40e: use pf_id for pf function id in qtx_ctl

 drivers/net/ethernet/intel/i40e/i40e.h             |   1 +
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c     | 135 ++++++++++++---------
 drivers/net/ethernet/intel/i40e/i40e_main.c        |  50 ++++----
 drivers/net/ethernet/intel/i40e/i40e_txrx.c        |  83 ++++++-------
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |   4 +-
 5 files changed, 146 insertions(+), 127 deletions(-)

-- 
1.8.3.1

[net-next v2 01/14] i40e: do not flush after re-enabling interrupts

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

Hot path doesn't need read-flush after interrupt enable, and this
flush really causes a lot of extra cpu utilization.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 3 ++-
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 2 --
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index fbe7fe2..69ed801 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2560,7 +2560,7 @@ void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector)
 	      I40E_PFINT_DYN_CTLN_CLEARPBA_MASK |
 	      (I40E_ITR_NONE << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT);
 	wr32(hw, I40E_PFINT_DYN_CTLN(vector - 1), val);
-	i40e_flush(hw);
+	/* skip the flush */
 }
 
 /**
@@ -2709,6 +2709,7 @@ static int i40e_vsi_enable_irq(struct i40e_vsi *vsi)
 		i40e_irq_dynamic_enable_icr0(pf);
 	}
 
+	i40e_flush(&pf->hw);
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index dc89e72..fbc40cd 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -559,8 +559,6 @@ static void i40e_update_dynamic_itr(struct i40e_q_vector *q_vector)
 	i40e_set_new_dynamic_itr(&q_vector->tx);
 	if (old_itr != q_vector->tx.itr)
 		wr32(hw, reg_addr, q_vector->tx.itr);
-
-	i40e_flush(hw);
 }
 
 /**
-- 
1.8.3.1

[net-next v2 02/14] i40e: don't free nonexistent rings

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

Not all VSIs have rings! Check to see if rings were actually allocated before
freeing them.

This prevents a panic when tx_rings[0] is not allocated.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 69ed801..a8c18fa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5160,11 +5160,12 @@ static s32 i40e_vsi_clear_rings(struct i40e_vsi *vsi)
 {
 	int i;
 
-	for (i = 0; i < vsi->alloc_queue_pairs; i++) {
-		kfree_rcu(vsi->tx_rings[i], rcu);
-		vsi->tx_rings[i] = NULL;
-		vsi->rx_rings[i] = NULL;
-	}
+	if (vsi->tx_rings[0])
+		for (i = 0; i < vsi->alloc_queue_pairs; i++) {
+			kfree_rcu(vsi->tx_rings[i], rcu);
+			vsi->tx_rings[i] = NULL;
+			vsi->rx_rings[i] = NULL;
+		}
 
 	return 0;
 }
-- 
1.8.3.1

[net-next v2 03/14] i40e: assign correct vector to VF

[Jeff Kirsher]

From: Mitch Williams <mitch.a.williams@intel.com>

Correct math error when assigning MSI-X vectors to VFs. The vectors-per-vf
value reported by the hardware already conveniently reports one less than the
actual value.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
v2:
 - Removed unnecessary parenthesis
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 8967e58..35f4909 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -251,7 +251,7 @@ static void i40e_config_irq_link_list(struct i40e_vf *vf, u16 vsi_idx,
 		reg_idx = I40E_VPINT_LNKLST0(vf->vf_id);
 	else
 		reg_idx = I40E_VPINT_LNKLSTN(
-			    ((pf->hw.func_caps.num_msix_vectors_vf - 1)
+					   (pf->hw.func_caps.num_msix_vectors_vf
 					      * vf->vf_id) + (vector_id - 1));
 
 	if (vecmap->rxq_map == 0 && vecmap->txq_map == 0) {
-- 
1.8.3.1

[net-next v2 04/14] i40e: fixup legacy interrupt handling

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

There were a number of little bugs in the error handling of irq setup, most of
which ended up panicing the kernel, and are addressed by this patch, along with
a couple formatting issues.

Legacy interrupts (including MSI) are used only in the case of failure to
allocate MSI-X interrupts.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a8c18fa..270190a 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4615,7 +4615,8 @@ static void i40e_fdir_setup(struct i40e_pf *pf)
 	bool new_vsi = false;
 	int err, i;
 
-	if (!(pf->flags & (I40E_FLAG_FDIR_ENABLED|I40E_FLAG_FDIR_ATR_ENABLED)))
+	if (!(pf->flags & (I40E_FLAG_FDIR_ENABLED |
+			   I40E_FLAG_FDIR_ATR_ENABLED)))
 		return;
 
 	pf->atr_sample_rate = I40E_DEFAULT_ATR_SAMPLE_RATE;
@@ -5435,7 +5436,8 @@ static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
 	if (pf->flags & I40E_FLAG_MSIX_ENABLED) {
 		err = i40e_init_msix(pf);
 		if (err) {
-			pf->flags &= ~(I40E_FLAG_RSS_ENABLED	   |
+			pf->flags &= ~(I40E_FLAG_MSIX_ENABLED	   |
+					I40E_FLAG_RSS_ENABLED	   |
 					I40E_FLAG_MQ_ENABLED	   |
 					I40E_FLAG_DCB_ENABLED	   |
 					I40E_FLAG_SRIOV_ENABLED	   |
@@ -5450,14 +5452,17 @@ static void i40e_init_interrupt_scheme(struct i40e_pf *pf)
 
 	if (!(pf->flags & I40E_FLAG_MSIX_ENABLED) &&
 	    (pf->flags & I40E_FLAG_MSI_ENABLED)) {
+		dev_info(&pf->pdev->dev, "MSIX not available, trying MSI\n");
 		err = pci_enable_msi(pf->pdev);
 		if (err) {
-			dev_info(&pf->pdev->dev,
-				 "MSI init failed (%d), trying legacy.\n", err);
+			dev_info(&pf->pdev->dev, "MSI init failed - %d\n", err);
 			pf->flags &= ~I40E_FLAG_MSI_ENABLED;
 		}
 	}
 
+	if (!(pf->flags & (I40E_FLAG_MSIX_ENABLED | I40E_FLAG_MSI_ENABLED)))
+		dev_info(&pf->pdev->dev, "MSIX and MSI not available, falling back to Legacy IRQ\n");
+
 	/* track first vector for misc interrupts */
 	err = i40e_get_lump(pf, pf->irq_pile, 1, I40E_PILE_VALID_BIT-1);
 }
@@ -6110,8 +6115,9 @@ static int i40e_vsi_setup_vectors(struct i40e_vsi *vsi)
 		goto vector_setup_out;
 	}
 
-	vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
-					 vsi->num_q_vectors, vsi->idx);
+	if (vsi->num_q_vectors)
+		vsi->base_vector = i40e_get_lump(pf, pf->irq_pile,
+						 vsi->num_q_vectors, vsi->idx);
 	if (vsi->base_vector < 0) {
 		dev_info(&pf->pdev->dev,
 			 "failed to get q tracking for VSI %d, err=%d\n",
-- 
1.8.3.1

[net-next v2 05/14] i40e: debugfs fixups

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

debugfs fixes for issues found by coverity.

This issue was identified by the coverity checker, reported by Hannes Frederic
Sowa.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 38 ++++++++++++++++++--------
 1 file changed, 26 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 19e248f..304f39d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -2019,21 +2019,35 @@ static const struct file_operations i40e_dbg_netdev_ops_fops = {
  **/
 void i40e_dbg_pf_init(struct i40e_pf *pf)
 {
-	struct dentry *pfile __attribute__((unused));
+	struct dentry *pfile;
 	const char *name = pci_name(pf->pdev);
+	const struct device *dev = &pf->pdev->dev;
 
 	pf->i40e_dbg_pf = debugfs_create_dir(name, i40e_dbg_root);
-	if (pf->i40e_dbg_pf) {
-		pfile = debugfs_create_file("command", 0600, pf->i40e_dbg_pf,
-					    pf, &i40e_dbg_command_fops);
-		pfile = debugfs_create_file("dump", 0600, pf->i40e_dbg_pf, pf,
-					    &i40e_dbg_dump_fops);
-		pfile = debugfs_create_file("netdev_ops", 0600, pf->i40e_dbg_pf,
-					    pf, &i40e_dbg_netdev_ops_fops);
-	} else {
-		dev_info(&pf->pdev->dev,
-			 "debugfs entry for %s failed\n", name);
-	}
+	if (!pf->i40e_dbg_pf)
+		return;
+
+	pfile = debugfs_create_file("command", 0600, pf->i40e_dbg_pf, pf,
+				    &i40e_dbg_command_fops);
+	if (!pfile)
+		goto create_failed;
+
+	pfile = debugfs_create_file("dump", 0600, pf->i40e_dbg_pf, pf,
+				    &i40e_dbg_dump_fops);
+	if (!pfile)
+		goto create_failed;
+
+	pfile = debugfs_create_file("netdev_ops", 0600, pf->i40e_dbg_pf, pf,
+				    &i40e_dbg_netdev_ops_fops);
+	if (!pfile)
+		goto create_failed;
+
+	return;
+
+create_failed:
+	dev_info(dev, "debugfs dir/file for %s failed\n", name);
+	debugfs_remove_recursive(pf->i40e_dbg_pf);
+	return;
 }
 
 /**
-- 
1.8.3.1

[net-next v2 06/14] i40e: clamp debugfs nvm read command

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

This issue was identified by the coverity checker where we were
not checking the upper limit on reads, reported by Hannes
Frederic Sowa.

Implement more specific limits on reads (min 1k, max 4k)

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 304f39d..c80fcb4 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1742,11 +1742,13 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 			goto command_write_done;
 		}
 
-		/* Read at least 512 words */
-		if (buffer_len == 0)
-			buffer_len = 512;
+		/* set the max length */
+		buffer_len = min_t(u16, buffer_len, I40E_MAX_AQ_BUF_SIZE/2);
 
 		bytes = 2 * buffer_len;
+
+		/* read at least 1k bytes, no more than 4kB */
+		bytes = clamp(bytes, (u16)1024, (u16)I40E_MAX_AQ_BUF_SIZE);
 		buff = kzalloc(bytes, GFP_KERNEL);
 		if (!buff)
 			goto command_write_done;
-- 
1.8.3.1

[net-next v2 07/14] i40e: fix use of untrusted scalar value warning

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

This is a fix for an issue reported by coverity, reported by
Hannes Frederic Sowa.

I'm unable to test if this patch actually fixes the coverity
reported issue, feedback is welcome.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 34 ++++++++++++++------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index c80fcb4..387bf94 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -151,9 +151,7 @@ static ssize_t i40e_dbg_dump_write(struct file *filp,
 				   size_t count, loff_t *ppos)
 {
 	struct i40e_pf *pf = filp->private_data;
-	char dump_request_buf[16];
 	bool seid_found = false;
-	int bytes_not_copied;
 	long seid = -1;
 	int buflen = 0;
 	int i, ret;
@@ -163,21 +161,12 @@ static ssize_t i40e_dbg_dump_write(struct file *filp,
 	/* don't allow partial writes */
 	if (*ppos != 0)
 		return 0;
-	if (count >= sizeof(dump_request_buf))
-		return -ENOSPC;
-
-	bytes_not_copied = copy_from_user(dump_request_buf, buffer, count);
-	if (bytes_not_copied < 0)
-		return bytes_not_copied;
-	if (bytes_not_copied > 0)
-		count -= bytes_not_copied;
-	dump_request_buf[count] = '\0';
 
 	/* decode the SEID given to be dumped */
-	ret = kstrtol(dump_request_buf, 0, &seid);
-	if (ret < 0) {
-		dev_info(&pf->pdev->dev, "bad seid value '%s'\n",
-			 dump_request_buf);
+	ret = kstrtol_from_user(buffer, count, 0, &seid);
+
+	if (ret) {
+		dev_info(&pf->pdev->dev, "bad seid value\n");
 	} else if (seid == 0) {
 		seid_found = true;
 
@@ -1023,11 +1012,11 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 				      size_t count, loff_t *ppos)
 {
 	struct i40e_pf *pf = filp->private_data;
+	char *cmd_buf, *cmd_buf_tmp;
 	int bytes_not_copied;
 	struct i40e_vsi *vsi;
 	u8 *print_buf_start;
 	u8 *print_buf;
-	char *cmd_buf;
 	int vsi_seid;
 	int veb_seid;
 	int cnt;
@@ -1046,6 +1035,12 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		count -= bytes_not_copied;
 	cmd_buf[count] = '\0';
 
+	cmd_buf_tmp = strchr(cmd_buf, '\n');
+	if (cmd_buf_tmp) {
+		*cmd_buf_tmp = '\0';
+		count = cmd_buf_tmp - cmd_buf + 1;
+	}
+
 	print_buf_start = kzalloc(I40E_MAX_DEBUG_OUT_BUFFER, GFP_KERNEL);
 	if (!print_buf_start)
 		goto command_write_done;
@@ -1900,6 +1895,7 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp,
 	struct i40e_pf *pf = filp->private_data;
 	int bytes_not_copied;
 	struct i40e_vsi *vsi;
+	char *buf_tmp;
 	int vsi_seid;
 	int i, cnt;
 
@@ -1918,6 +1914,12 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp,
 		count -= bytes_not_copied;
 	i40e_dbg_netdev_ops_buf[count] = '\0';
 
+	buf_tmp = strchr(i40e_dbg_netdev_ops_buf, '\n');
+	if (buf_tmp) {
+		*buf_tmp = '\0';
+		count = buf_tmp - i40e_dbg_netdev_ops_buf + 1;
+	}
+
 	if (strncmp(i40e_dbg_netdev_ops_buf, "tx_timeout", 10) == 0) {
 		cnt = sscanf(&i40e_dbg_netdev_ops_buf[11], "%i", &vsi_seid);
 		if (cnt != 1) {
-- 
1.8.3.1

[net-next v2 08/14] i40e: fix sign extension issue

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

This is a fix for an issue reported by coverity, reported
by Hannes Frederic Sowa.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Hannes Frederic Sowa <hannes@stressinduktion.org>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index fbc40cd..8fc313c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -99,9 +99,9 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 					   << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT);
 	else
 		fdir_desc->qindex_flex_ptype_vsi |=
-					    cpu_to_le32((fdir_data->dest_vsi
-					    << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT)
-					    & I40E_TXD_FLTR_QW0_DEST_VSI_MASK);
+			cpu_to_le32((((u32)fdir_data->dest_vsi) <<
+					  I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT) &
+				    I40E_TXD_FLTR_QW0_DEST_VSI_MASK);
 
 	fdir_desc->dtype_cmd_cntindex =
 				    cpu_to_le32(I40E_TX_DESC_DTYPE_FILTER_PROG);
@@ -127,9 +127,9 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 		fdir_desc->dtype_cmd_cntindex |=
 				    cpu_to_le32(I40E_TXD_FLTR_QW1_CNT_ENA_MASK);
 		fdir_desc->dtype_cmd_cntindex |=
-					    cpu_to_le32((fdir_data->cnt_index
-					    << I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT)
-					    & I40E_TXD_FLTR_QW1_CNTINDEX_MASK);
+			cpu_to_le32((((u32)fdir_data->cnt_index) <<
+					   I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
+				    I40E_TXD_FLTR_QW1_CNTINDEX_MASK);
 	}
 
 	fdir_desc->fd_id = cpu_to_le32(fdir_data->fd_id);
-- 
1.8.3.1

[net-next v2 09/14] i40e: refactor fdir setup function

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

This function did a lot of unnecessary cpu_to_xxx(foo) and making it
worse, each of these calls caused a lot of line wrapping.

Fix look and feel via a refactor of this function.  No functional
changes.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 78 ++++++++++++-----------------
 1 file changed, 33 insertions(+), 45 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 8fc313c..41be7a7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -37,6 +37,7 @@ static inline __le64 build_ctob(u32 td_cmd, u32 td_offset, unsigned int size,
 			   ((u64)td_tag  << I40E_TXD_QW1_L2TAG1_SHIFT));
 }
 
+#define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
 /**
  * i40e_program_fdir_filter - Program a Flow Director filter
  * @fdir_input: Packet data that will be filter parameters
@@ -50,6 +51,7 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 	struct i40e_tx_buffer *tx_buf;
 	struct i40e_tx_desc *tx_desc;
 	struct i40e_ring *tx_ring;
+	unsigned int fpt, dcc;
 	struct i40e_vsi *vsi;
 	struct device *dev;
 	dma_addr_t dma;
@@ -68,7 +70,7 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 	dev = tx_ring->dev;
 
 	dma = dma_map_single(dev, fdir_data->raw_packet,
-				I40E_FDIR_MAX_RAW_PACKET_LOOKUP, DMA_TO_DEVICE);
+			     I40E_FDIR_MAX_RAW_PACKET_LOOKUP, DMA_TO_DEVICE);
 	if (dma_mapping_error(dev, dma))
 		goto dma_fail;
 
@@ -77,74 +79,61 @@ int i40e_program_fdir_filter(struct i40e_fdir_data *fdir_data,
 	fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
 	tx_buf = &tx_ring->tx_bi[i];
 
-	i++;
-	tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+	tx_ring->next_to_use = (i + 1 < tx_ring->count) ? i + 1 : 0;
 
-	fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32((fdir_data->q_index
-					     << I40E_TXD_FLTR_QW0_QINDEX_SHIFT)
-					     & I40E_TXD_FLTR_QW0_QINDEX_MASK);
+	fpt = (fdir_data->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) &
+	      I40E_TXD_FLTR_QW0_QINDEX_MASK;
 
-	fdir_desc->qindex_flex_ptype_vsi |= cpu_to_le32((fdir_data->flex_off
-					    << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT)
-					    & I40E_TXD_FLTR_QW0_FLEXOFF_MASK);
+	fpt |= (fdir_data->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT) &
+	       I40E_TXD_FLTR_QW0_FLEXOFF_MASK;
 
-	fdir_desc->qindex_flex_ptype_vsi |= cpu_to_le32((fdir_data->pctype
-					     << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT)
-					     & I40E_TXD_FLTR_QW0_PCTYPE_MASK);
+	fpt |= (fdir_data->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) &
+	       I40E_TXD_FLTR_QW0_PCTYPE_MASK;
 
 	/* Use LAN VSI Id if not programmed by user */
 	if (fdir_data->dest_vsi == 0)
-		fdir_desc->qindex_flex_ptype_vsi |=
-					  cpu_to_le32((pf->vsi[pf->lan_vsi]->id)
-					   << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT);
+		fpt |= (pf->vsi[pf->lan_vsi]->id) <<
+		       I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT;
 	else
-		fdir_desc->qindex_flex_ptype_vsi |=
-			cpu_to_le32((((u32)fdir_data->dest_vsi) <<
-					  I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT) &
-				    I40E_TXD_FLTR_QW0_DEST_VSI_MASK);
+		fpt |= ((u32)fdir_data->dest_vsi <<
+			I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT) &
+		       I40E_TXD_FLTR_QW0_DEST_VSI_MASK;
+
+	fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(fpt);
 
-	fdir_desc->dtype_cmd_cntindex =
-				    cpu_to_le32(I40E_TX_DESC_DTYPE_FILTER_PROG);
+	dcc = I40E_TX_DESC_DTYPE_FILTER_PROG;
 
 	if (add)
-		fdir_desc->dtype_cmd_cntindex |= cpu_to_le32(
-				       I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE
-					<< I40E_TXD_FLTR_QW1_PCMD_SHIFT);
+		dcc |= I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
+		       I40E_TXD_FLTR_QW1_PCMD_SHIFT;
 	else
-		fdir_desc->dtype_cmd_cntindex |= cpu_to_le32(
-					   I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE
-					   << I40E_TXD_FLTR_QW1_PCMD_SHIFT);
+		dcc |= I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
+		       I40E_TXD_FLTR_QW1_PCMD_SHIFT;
 
-	fdir_desc->dtype_cmd_cntindex |= cpu_to_le32((fdir_data->dest_ctl
-					  << I40E_TXD_FLTR_QW1_DEST_SHIFT)
-					  & I40E_TXD_FLTR_QW1_DEST_MASK);
+	dcc |= (fdir_data->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT) &
+	       I40E_TXD_FLTR_QW1_DEST_MASK;
 
-	fdir_desc->dtype_cmd_cntindex |= cpu_to_le32(
-		     (fdir_data->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT)
-		      & I40E_TXD_FLTR_QW1_FD_STATUS_MASK);
+	dcc |= (fdir_data->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT) &
+	       I40E_TXD_FLTR_QW1_FD_STATUS_MASK;
 
 	if (fdir_data->cnt_index != 0) {
-		fdir_desc->dtype_cmd_cntindex |=
-				    cpu_to_le32(I40E_TXD_FLTR_QW1_CNT_ENA_MASK);
-		fdir_desc->dtype_cmd_cntindex |=
-			cpu_to_le32((((u32)fdir_data->cnt_index) <<
-					   I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
-				    I40E_TXD_FLTR_QW1_CNTINDEX_MASK);
+		dcc |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
+		dcc |= ((u32)fdir_data->cnt_index <<
+			I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
+		       I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
 	}
 
+	fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dcc);
 	fdir_desc->fd_id = cpu_to_le32(fdir_data->fd_id);
 
 	/* Now program a dummy descriptor */
 	i = tx_ring->next_to_use;
 	tx_desc = I40E_TX_DESC(tx_ring, i);
 
-	i++;
-	tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+	tx_ring->next_to_use = (i + 1 < tx_ring->count) ? i + 1 : 0;
 
 	tx_desc->buffer_addr = cpu_to_le64(dma);
-	td_cmd = I40E_TX_DESC_CMD_EOP |
-		 I40E_TX_DESC_CMD_RS  |
-		 I40E_TX_DESC_CMD_DUMMY;
+	td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY;
 
 	tx_desc->cmd_type_offset_bsz =
 		build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_LOOKUP, 0);
@@ -1254,7 +1243,6 @@ static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
 	fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
 }
 
-#define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
 /**
  * i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW
  * @skb:     send buffer
-- 
1.8.3.1

[net-next v2 10/14] i40e: tweaking icr0 handling for legacy irq

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

Fix the overactive irq issue seen in testing and allow use of
the legacy interrupt.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e.h      |  1 +
 drivers/net/ethernet/intel/i40e/i40e_main.c | 12 +++++-------
 drivers/net/ethernet/intel/i40e/i40e_txrx.c |  3 ++-
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index c06a76c..49572dc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -545,6 +545,7 @@ static inline void i40e_dbg_init(void) {}
 static inline void i40e_dbg_exit(void) {}
 #endif /* CONFIG_DEBUG_FS*/
 void i40e_irq_dynamic_enable(struct i40e_vsi *vsi, int vector);
+void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf);
 int i40e_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
 void i40e_vlan_stripping_disable(struct i40e_vsi *vsi);
 int i40e_vsi_add_vlan(struct i40e_vsi *vsi, s16 vid);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 270190a..727d14d 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2532,7 +2532,7 @@ static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
  * i40e_irq_dynamic_enable_icr0 - Enable default interrupt generation for icr0
  * @pf: board private structure
  **/
-static void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf)
+void i40e_irq_dynamic_enable_icr0(struct i40e_pf *pf)
 {
 	struct i40e_hw *hw = &pf->hw;
 	u32 val;
@@ -2742,14 +2742,14 @@ static irqreturn_t i40e_intr(int irq, void *data)
 
 	icr0 = rd32(hw, I40E_PFINT_ICR0);
 
-	/* if sharing a legacy IRQ, we might get called w/o an intr pending */
-	if ((icr0 & I40E_PFINT_ICR0_INTEVENT_MASK) == 0)
-		return IRQ_NONE;
-
 	val = rd32(hw, I40E_PFINT_DYN_CTL0);
 	val = val | I40E_PFINT_DYN_CTL0_CLEARPBA_MASK;
 	wr32(hw, I40E_PFINT_DYN_CTL0, val);
 
+	/* if sharing a legacy IRQ, we might get called w/o an intr pending */
+	if ((icr0 & I40E_PFINT_ICR0_INTEVENT_MASK) == 0)
+		return IRQ_NONE;
+
 	ena_mask = rd32(hw, I40E_PFINT_ICR0_ENA);
 
 	/* only q0 is used in MSI/Legacy mode, and none are used in MSIX */
@@ -2763,7 +2763,6 @@ static irqreturn_t i40e_intr(int irq, void *data)
 		qval = rd32(hw, I40E_QINT_TQCTL(0));
 		qval &= ~I40E_QINT_TQCTL_CAUSE_ENA_MASK;
 		wr32(hw, I40E_QINT_TQCTL(0), qval);
-		i40e_flush(hw);
 
 		if (!test_bit(__I40E_DOWN, &pf->state))
 			napi_schedule(&pf->vsi[pf->lan_vsi]->q_vectors[0]->napi);
@@ -2825,7 +2824,6 @@ static irqreturn_t i40e_intr(int irq, void *data)
 
 	/* re-enable interrupt causes */
 	wr32(hw, I40E_PFINT_ICR0_ENA, ena_mask);
-	i40e_flush(hw);
 	if (!test_bit(__I40E_DOWN, &pf->state)) {
 		i40e_service_event_schedule(pf);
 		i40e_irq_dynamic_enable_icr0(pf);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 41be7a7..f1f03bc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -1142,7 +1142,8 @@ int i40e_napi_poll(struct napi_struct *napi, int budget)
 			qval = rd32(hw, I40E_QINT_TQCTL(0));
 			qval |= I40E_QINT_TQCTL_CAUSE_ENA_MASK;
 			wr32(hw, I40E_QINT_TQCTL(0), qval);
-			i40e_flush(hw);
+
+			i40e_irq_dynamic_enable_icr0(vsi->back);
 		}
 	}
 
-- 
1.8.3.1

[net-next v2 11/14] i40e: reorder block declarations in debugfs

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

This is a cleanup of the local variables declared at the beginning
of each function.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
v2:
 - Fixed patch description based on feedback from Sergei Shtylyov
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 387bf94..246b177 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -1147,9 +1147,9 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 		i40e_veb_release(pf->veb[i]);
 
 	} else if (strncmp(cmd_buf, "add macaddr", 11) == 0) {
-		u8 ma[6];
-		int vlan = 0;
 		struct i40e_mac_filter *f;
+		int vlan = 0;
+		u8 ma[6];
 		int ret;
 
 		cnt = sscanf(&cmd_buf[11],
@@ -1185,8 +1185,8 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 				 ma, vlan, vsi_seid, f, ret);
 
 	} else if (strncmp(cmd_buf, "del macaddr", 11) == 0) {
-		u8 ma[6];
 		int vlan = 0;
+		u8 ma[6];
 		int ret;
 
 		cnt = sscanf(&cmd_buf[11],
@@ -1222,9 +1222,9 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 				 ma, vlan, vsi_seid, ret);
 
 	} else if (strncmp(cmd_buf, "add pvid", 8) == 0) {
-		int v;
-		u16 vid;
 		i40e_status ret;
+		u16 vid;
+		int v;
 
 		cnt = sscanf(&cmd_buf[8], "%i %u", &vsi_seid, &v);
 		if (cnt != 2) {
@@ -1535,10 +1535,10 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 	} else if ((strncmp(cmd_buf, "add fd_filter", 13) == 0) ||
 		   (strncmp(cmd_buf, "rem fd_filter", 13) == 0)) {
 		struct i40e_fdir_data fd_data;
-		int ret;
 		u16 packet_len, i, j = 0;
 		char *asc_packet;
 		bool add = false;
+		int ret;
 
 		asc_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_LOOKUP,
 				     GFP_KERNEL);
@@ -1626,9 +1626,9 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 			}
 		} else if (strncmp(&cmd_buf[5],
 			   "get local", 9) == 0) {
+			u16 llen, rlen;
 			int ret, i;
 			u8 *buff;
-			u16 llen, rlen;
 			buff = kzalloc(I40E_LLDPDU_SIZE, GFP_KERNEL);
 			if (!buff)
 				goto command_write_done;
@@ -1659,9 +1659,9 @@ static ssize_t i40e_dbg_command_write(struct file *filp,
 			kfree(buff);
 			buff = NULL;
 		} else if (strncmp(&cmd_buf[5], "get remote", 10) == 0) {
+			u16 llen, rlen;
 			int ret, i;
 			u8 *buff;
-			u16 llen, rlen;
 			buff = kzalloc(I40E_LLDPDU_SIZE, GFP_KERNEL);
 			if (!buff)
 				goto command_write_done;
-- 
1.8.3.1

[net-next v2 12/14] i40e: check vsi ptrs before dumping them

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

Make sure there really are rings and queues before trying to dump
information in them.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_debugfs.c | 39 +++++++++++++++-----------
 1 file changed, 23 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
index 246b177..ef4cb1c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
@@ -234,26 +234,33 @@ static ssize_t i40e_dbg_dump_write(struct file *filp,
 			memcpy(p, vsi, len);
 			p += len;
 
-			len = (sizeof(struct i40e_q_vector)
-				* vsi->num_q_vectors);
-			memcpy(p, vsi->q_vectors, len);
-			p += len;
-
-			len = (sizeof(struct i40e_ring) * vsi->num_queue_pairs);
-			memcpy(p, vsi->tx_rings, len);
-			p += len;
-			memcpy(p, vsi->rx_rings, len);
-			p += len;
+			if (vsi->num_q_vectors) {
+				len = (sizeof(struct i40e_q_vector)
+					* vsi->num_q_vectors);
+				memcpy(p, vsi->q_vectors, len);
+				p += len;
+			}
 
-			for (i = 0; i < vsi->num_queue_pairs; i++) {
-				len = sizeof(struct i40e_tx_buffer);
-				memcpy(p, vsi->tx_rings[i]->tx_bi, len);
+			if (vsi->num_queue_pairs) {
+				len = (sizeof(struct i40e_ring) *
+				      vsi->num_queue_pairs);
+				memcpy(p, vsi->tx_rings, len);
+				p += len;
+				memcpy(p, vsi->rx_rings, len);
 				p += len;
 			}
-			for (i = 0; i < vsi->num_queue_pairs; i++) {
+
+			if (vsi->tx_rings[0]) {
+				len = sizeof(struct i40e_tx_buffer);
+				for (i = 0; i < vsi->num_queue_pairs; i++) {
+					memcpy(p, vsi->tx_rings[i]->tx_bi, len);
+					p += len;
+				}
 				len = sizeof(struct i40e_rx_buffer);
-				memcpy(p, vsi->rx_rings[i]->rx_bi, len);
-				p += len;
+				for (i = 0; i < vsi->num_queue_pairs; i++) {
+					memcpy(p, vsi->rx_rings[i]->rx_bi, len);
+					p += len;
+				}
 			}
 
 			/* macvlan filter list */
-- 
1.8.3.1

[net-next v2 13/14] i40e: use pf_id for pf function id in qtx_ctl

[Jeff Kirsher]

From: Shannon Nelson <shannon.nelson@intel.com>

Simplify code by using an already existing variable.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 4 ++--
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 727d14d..d889342 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2174,8 +2174,8 @@ static int i40e_configure_tx_ring(struct i40e_ring *ring)
 
 	/* Now associate this queue with this PCI function */
 	qtx_ctl = I40E_QTX_CTL_PF_QUEUE;
-	qtx_ctl |= ((hw->hmc.hmc_fn_id << I40E_QTX_CTL_PF_INDX_SHIFT)
-						& I40E_QTX_CTL_PF_INDX_MASK);
+	qtx_ctl |= ((hw->pf_id << I40E_QTX_CTL_PF_INDX_SHIFT) &
+		    I40E_QTX_CTL_PF_INDX_MASK);
 	wr32(hw, I40E_QTX_CTL(pf_q), qtx_ctl);
 	i40e_flush(hw);
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 35f4909..0759698 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -383,7 +383,7 @@ static int i40e_config_vsi_tx_queue(struct i40e_vf *vf, u16 vsi_idx,
 
 	/* associate this queue with the PCI VF function */
 	qtx_ctl = I40E_QTX_CTL_VF_QUEUE;
-	qtx_ctl |= ((hw->hmc.hmc_fn_id << I40E_QTX_CTL_PF_INDX_SHIFT)
+	qtx_ctl |= ((hw->pf_id << I40E_QTX_CTL_PF_INDX_SHIFT)
 		    & I40E_QTX_CTL_PF_INDX_MASK);
 	qtx_ctl |= (((vf->vf_id + hw->func_caps.vf_base_id)
 		     << I40E_QTX_CTL_VFVM_INDX_SHIFT)
-- 
1.8.3.1

[net-next v2 14/14] i40e: Bump version

[Jeff Kirsher]

From: Catherine Sullivan <catherine.sullivan@intel.com>

Update the driver version.

Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index d889342..41a79df 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -36,7 +36,7 @@ static const char i40e_driver_string[] =
 
 #define DRV_VERSION_MAJOR 0
 #define DRV_VERSION_MINOR 3
-#define DRV_VERSION_BUILD 10
+#define DRV_VERSION_BUILD 11
 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
 	     __stringify(DRV_VERSION_MINOR) "." \
 	     __stringify(DRV_VERSION_BUILD)    DRV_KERN
-- 
1.8.3.1

Re: [net-next v2 00/14][pull request] Intel Wired LAN Driver Updates

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 22 Oct 2013 07:22:23 -0700

> This series contains updates to i40e only.
> 
> Jesse provides 6 patches against i40e.  First is a patch to reduce
> CPU utilization by reducing read-flush to read in the hot path.  Next
> couple of patches resolve coverity issues reported by Hannes Frederic
> Sowa <hannes@stressinduktion.org>.  Then Jesse refactored i40e to cleanup
> functions which used cpu_to_xxx(foo) which caused a lot of line wrapping.
> 
> Mitch provides 2 i40e patches.  First fixes a panic when tx_rings[0]
> are not allocated, his second patch corrects a math error when
> assigning MSI-X vectors to VFs.  The vectors-per-vf value reported
> by the hardware already conveniently reports one less than the actual
> value.
> 
> Shannon provides 5 patches against i40e.  His first patch corrects a
> number of little bugs in the error handling of irq setup, most of
> which ended up panicing the kernel.  Next he fixes the overactive
> IRQ issue seen in testing and allows the use of the legacy interrupt.
> Shannon then provides a cleanup of the arguments declared at the
> beginning of each function.  Then he provides a patch to make sure
> that there are really rings and queues before trying to dump
> information in them.  Lastly he simplifies the code by using an
> already existing variable.
> 
> Catherine provides an i40e patch to bump the version.

Pulled, thanks Jeff.

Just a note for the future, and I decided not to push back this time when
I saw it in this series.  When you have a construct like:

	if (x)
		for( ... ) {
		}

Put the top-level condition in braces too as it's much easier to read
and audit:

	if (x) {
		for ( ... ) {
		}
	}

Thanks.

Re: [net-next v2 00/14][pull request] Intel Wired LAN Driver Updates

[Jeff Kirsher]

[-- Attachment #1: Type: text/plain, Size: 2010 bytes --]

On Tue, 2013-10-22 at 15:53 -0400, David Miller wrote:
> From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> Date: Tue, 22 Oct 2013 07:22:23 -0700
> 
> > This series contains updates to i40e only.
> > 
> > Jesse provides 6 patches against i40e.  First is a patch to reduce
> > CPU utilization by reducing read-flush to read in the hot path.  Next
> > couple of patches resolve coverity issues reported by Hannes Frederic
> > Sowa <hannes@stressinduktion.org>.  Then Jesse refactored i40e to cleanup
> > functions which used cpu_to_xxx(foo) which caused a lot of line wrapping.
> > 
> > Mitch provides 2 i40e patches.  First fixes a panic when tx_rings[0]
> > are not allocated, his second patch corrects a math error when
> > assigning MSI-X vectors to VFs.  The vectors-per-vf value reported
> > by the hardware already conveniently reports one less than the actual
> > value.
> > 
> > Shannon provides 5 patches against i40e.  His first patch corrects a
> > number of little bugs in the error handling of irq setup, most of
> > which ended up panicing the kernel.  Next he fixes the overactive
> > IRQ issue seen in testing and allows the use of the legacy interrupt.
> > Shannon then provides a cleanup of the arguments declared at the
> > beginning of each function.  Then he provides a patch to make sure
> > that there are really rings and queues before trying to dump
> > information in them.  Lastly he simplifies the code by using an
> > already existing variable.
> > 
> > Catherine provides an i40e patch to bump the version.
> 
> Pulled, thanks Jeff.
> 
> Just a note for the future, and I decided not to push back this time when
> I saw it in this series.  When you have a construct like:
> 
> 	if (x)
> 		for( ... ) {
> 		}
> 
> Put the top-level condition in braces too as it's much easier to read
> and audit:
> 
> 	if (x) {
> 		for ( ... ) {
> 		}
> 	}
> 
> Thanks.

I agree, I will add that to my list of checks for the future.  Thanks
Dave.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]